| 11. |
- Arvizu, Miguel A, et al.
(författare)
-
Electrochromism in sputter-deposited W-Ti oxide films : Durability enhancement due to Ti
- 2014
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248 .- 1879-3398. ; 125, s. 184-189
-
Tidskriftsartikel (refereegranskat)abstract
- Thin films of W-Ti oxide were prepared by reactive DC magnetron sputtering and were characterized by Rutherford bathcattering spectrometry, X-ray diffraction, scanning electron microscopy and atomic force microscopy. The electrochromic properties were studied by cyclic voltammetry in an electrolyte of lithium perchlorate in propylene carbonate and by optical transmittance measurements. The addition of Ti significantly promoted the amorphous nature of the films and stabilized their electrochemical cycling performance and dynamic range for electrochromism. (C) 2014 Elsevier B.V. All rights reserved.
|
|
| 12. |
- Arvizu, Miguel, et al.
(författare)
-
Galvanostatic ion de-trapping rejuvenates oxide thin films
- 2015
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 7:48, s. 26387-26390
-
Tidskriftsartikel (refereegranskat)abstract
- Ion trapping under charge insertion-extraction is well-known to degrade the electrochemical performance of oxides. Galvano-static treatment was recently shown capable to rejuvenate the oxide, but the detailed mechanism remained uncertain. Here we report on amorphous electrochromic (EC) WO3 thin films prepared by sputtering and electrochemically cycled in a lithium-containing electrolyte under conditions leading to severe loss of charge exchange capacity and optical modulation span. Time-of-flight elastic recoil detection analysis (ToF-ERDA) documented pronounced Li+ trapping associated with the degradation of the EC properties and, importantly, that Li+ detrapping, caused by a weak constant current drawn through the film for some time, could recover the original EC performance. Thus, ToF-ERDA provided direct and unambiguous evidence for Li+ detrapping.
|
|
| 13. |
- Atak, Gamze, et al.
(författare)
-
Durability studies of annealed electrochromic tungsten oxide films
- 2021
-
Ingår i: EMRS Fall Meeting 2021.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In electrochromic (EC) applications, annealing is a crucial parameter not only for an individual layer but also for a full device. For the fabrication of a complete EC device, indium tin oxide (ITO) is often preferred as a transparent conductor layer. ITO films with high transparency and low electrical resistance are usually obtained by sputtering at high substrate temperatures. Consequently, the effect of high temperature on the EC layers can be very significant during sputtering of the ITO top layer for EC devices consisting of five sputtered layers on a single substrate. The role of annealing of a single layer of WO3 may also be important for EC performance. In the present work, we studied the effects of annealing on the durability of WO3 films. Thin films of WO3 were deposited by reactive DC magnetron sputtering in a mixture of Ar and O2 gases using an oxygen to argon ratio of 0.15. The total gas pressure was set to 4.0 Pa, and the sputtering power was 200 W. The WO3 films were deposited onto (i) unheated glass plates, (ii) such plates pre-coated with transparent and electrically conducting ITO with a sheet resistance of 60 Ω/square, and (iii) glass plates pre-coated with fluorine-doped tin oxide (FTO) with a sheet resistance of 14 Ω/square. Film thicknesses were 300±10 nm. After deposition of the films, the samples were annealed at 150, 300, 450, and 600 °C in ambient air for one h using a heating rate of 10 °C min-1. Cyclic voltammetry (CV) was performed for up to 500 cycles between 2.0 and 4.0 V vs. Li/Li+ at a scan rate of 20 mV s–1. Annealing at temperatures at and above 300 °C resulted in deteriorated electrochromic properties of the WO3 films i.e., a decreased transmittance variation. Charge density and coloration efficiency changes during extended electrochemical cycling were also observed as a function of cycle number and annealing temperature. It was found that the maximum optical transmittance modulation at a wavelength of 528 nm after 500 CV cycles was 69.3% for the film annealed at 150 °C.
|
|
| 14. |
- Atak, Gamze, et al.
(författare)
-
Electrochromic tungsten oxide films prepared by sputtering : Optimizing cycling durability by judicious choice of deposition parameters
- 2021
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 367
-
Tidskriftsartikel (refereegranskat)abstract
- Thin films of W oxide were prepared by reactive DC magnetron sputtering (5 cm-diameter W target), and their electrochromic (EC) properties were investigated in an electrolyte of LiClO4 in propylene carbonate. The purpose of the study was to elucidate the role of critical deposition parameters-oxygen/argon gas flow ratio for the sputter plasma Gamma, total pressure in the sputter plasma p(tot) , and sputtering power P-s - on the EC performance with foci on electrochemical cycling durability and optical modulation range Delta T. Specifically, we used 0.15 <= Gamma <= 0.90, 5 <= p(tot) <= 30 mTorr, and 200 <= P-s <= 400 W and studied cycling durability for up to 500 voltammetric cycles in the range 2.0-4.0 V vs. Li/Li+ together with optical properties at a wavelength of 528 nm. Most significantly, we discovered that a judicious choice of deposition parameters could yield films with superior cycling durability. Thus a similar to 300 nm-thick film prepared at Gamma = 0.90, p(tot) = 10 mTorr, and P-s = 200 W showed Delta T approximate to 65% after an initial "training" during similar to 100 voltammetric cycles; higher values of p(tot), on the other hand, yielded films whose Delta Ts degraded by similar to 10% during the cycling, and a lower value of p(tot) led to dark films with only marginal electrochromism. Hence our work delineates a pathway towards W oxide films with excellent durability of the EC properties.
|
|
| 15. |
- Atak, Gamze, et al.
(författare)
-
Nitrogen doped W oxide films for electrochromic applications
- 2019
-
Ingår i: EMRS Spring Meeting 2019.
-
Konferensbidrag (refereegranskat)abstract
- Electrochromic (EC) materials are able to change their optical properties such as transmission, absorption and reflection reversibly by application of an external voltage. EC metal oxides are divided into two groups: cathodic (coloring under ion insertion) and anodic (coloring under ion extraction). W oxide is a well-known cathodic EC material and its color changes from transparent to dark blue when ions are inserted.A desirable electrochromic material must have and maintain a high optical modulation, high coloration efficiency, fast coloration/bleaching switching kinetics and a stable charge/ discharge reversibility. In this study, W oxide films with different nitrogen levels were deposited by using reactive DC sputtering onto glass and ITO coated glass in Ar+O2+N2 atmosphere. For all films, the total gas pressure was set to 4.0 Pa, the Ar flow rate was kept at 50 ml/min, and the O2+N2 flow rate was kept at 7.5 ml/min. The optical, structural and electrochromic properties of undoped and N-doped W oxide films were investigated. The optical studies revealed that the average optical transmittance and band gap decreased (from 3.43 to 3.08 eV) due to N doping. It is shown that a small amount of nitrogen has promising effects on the EC performance (i.e. charge/discharge reversibility, optical modulation, coloration efficiency) of the WO3 films. It is observed that CE values increased by increasing N2 flow rate and its maximum value was 33.8 cm2/C. The maximum ΔT at 537 nm was 73.6% for an optimized N doped W oxide film.
|
|
| 16. |
- Atak, Gamze, et al.
(författare)
-
The role of oxygen to argon gas flow ratio on the durability of sputter-deposited electrochromic tungsten oxide films
- 2021
-
Ingår i: EMRS Fall Meeting 2021.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Materials that are able to vary their transparency and coloration reversibly when they are subjected to an electrical current or voltage are referred to as “electrochromic” (EC). High optical transmittance modulation and long service lifetime are apparent requirements for EC materials used in smart windows technology. An extended service lifetime is provided by the long-term durability of the materials. One important aspect of durability is the ability to sustain charge transport between the EC film and electrolyte, or between the two EC films in a device, for many hundreds or thousands of cycles without any significant changes in the performance such as optical modulation and inserted-extracted charge. The purpose of this study is to clarify the effects of the oxygen-argon gas flow ratio during sputter deposition on the durability of WO3 films. In this study, the oxygen to argon gas-flow ratio was modulated by setting the O2 flow rate to 7.5, 15.0, 22.5, and 45.0 ml min-1 and using a fixed Ar flow rate of 50 ml min-1. Thus, the oxygen to argon gas-flow ratio was varied from 0.15 to 0.90. The pressure in the sputter plasma was set as 30 mTorr and the sputter power was maintained at 200 W. For durability studies, cyclic voltammetry data were recorded for up to 500 cycles between 2.0 and 4.0 V versus Li/Li+ at a scan rate of 20 mV s-1. High oxygen to argon gas ratio was found to have a positive effect on the EC properties of the films. When the long-term performance of the films was examined, it was seen that all the samples displayed a slow decline of the colored-state transmittance due to ion accumulation in the host material. After 500 color-bleach cycles, the maximum optical transmittance modulation between colored and bleached states at a wavelength of 528 nm was 63.6% when the oxygen to argon gas-flow ratio was 0.90.
|
|
| 17. |
- Avendano, Esteban, et al.
(författare)
-
Coloration Mechanism in Proton-Intercalated Electrochromic Hydrated NiOy and Ni1-xVxOy Thin Films
- 2009
-
Ingår i: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 156:8, s. p132-p138
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochromic (EC) films of nickel oxide, with and without vanadium, were prepared by reactive dc magnetron sputtering. They were characterized by electrochemical and optical measurements and studied by X-ray photoelectron spectroscopy (PES) using synchrotron radiation. The films were analyzed under as-deposited conditions and after bleaching/coloration by insertion/extraction of protons from a basic solution and ensuing charge stabilization. Optical measurements were consistent with a coloration process due to charge-transfer transitions from Ni2+ to Ni3+ states. The PES measurements showed a higher concentration of Ni3+ in the colored films. Moreover, two peaks were present in the O 1s spectra of the bleached film and pointed to contributions of Ni(OH)(2) and NiO. The changes in the O 1s spectra upon coloration treatment indicate the presence of Ni2O3 in the colored film and necessitated an extension of the conventional model for the mechanism of EC coloration. The model involves not only proton extraction from nickel hydroxide to form nickel oxyhydroxide but also participation of NiO in the coloration process to form Ni2O3.
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
|
|
