| 11. |
- Lindgren, Lars Johan, 1977, et al.
(författare)
-
Synthesis, Characterization, and Devices of a Series of Alternating Copolymers for Solar Cells
- 2009
-
Ingår i: CHEMISTRY OF MATERIALS. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 21:15, s. 3491-3502
-
Tidskriftsartikel (refereegranskat)abstract
- In this study we report the synthesis, characterization. and photovoltaic properties of a series of six Conjugated polymers based on donor-acceptor-donor (DAD) structure. The polymers are obtained via Suzuki polymerization of different alkoxy-substituted DAD monomers together with a substituted fluorene or phenylene monomer. Application of polymers as light-harvesting and electron-donating materials in solar cells, in conjunction with both [60]PCBM and [70]PCBM as acceptors, show power-conversion efficiencies (PCEs) up to 2.9%, values obtained without extensive optimization work. Furthermore, atomic force microscopy and field-effect transistor (FET) mobility measurements of acceptor-polymer mixtures show that differences in substitution on the polymers affect morphology, mobility, and device performance. Within the series of polymers, all showing similar optical absorption and redox behavior, substituents play an important role in phase separation on a micrometer scale, which in turn has a large impact on device performance. The phase-separation behavior is clearly seen in [70]PCBM devices where the best-performing devices are obtained using the polymers with short alkoxy groups or no substituents together with a high speed of spin coating during device preparation.
|
|
| 12. |
- Pal, S. K., et al.
(författare)
-
Geminate Charge Recombination in Polymer/Fullerene Bulk Heterojunction Films and Implications for Solar Cell Function
- 2010
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 132:35, s. 12440-12451
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied the influence of three different fullerene derivatives on the charge generation and recombination dynamics of polymer/fullerene bulk heterojunction (BHJ) solar cell blends. Charge generation in APFO3/[70]PCBM and APFO3/[60]PCBM is very similar and somewhat slower than charge generation in APFO3/[70]BTPF. This difference qualitatively matches the trend in free energy change of electron transfer estimated from the LUMO energies of the polymer and fullerene derivatives. The first order (geminate) charge recombination rate is significantly different for the three fullerene derivatives studied and increases in the order APFO3/[70]PCBM
|
|
| 13. |
- Wang, Ergang, 1981, et al.
(författare)
-
An Easily Synthesized Blue Polymer for High-Performance Polymer Solar Cells
- 2010
-
Ingår i: ADVANCED MATERIALS. - : John Wiley and Sons, Ltd. - 0935-9648 .- 1521-4095. ; 22:46, s. 5240-5244
-
Tidskriftsartikel (refereegranskat)abstract
- High performance solar cells fabricated from an easily synthesized donor-acceptor polymer show maximum power point up to 6.0 mW cm(-2), with an open-circuit voltage of 0.89 V, short-circuit current density of 10.5 mA cm(-2) and fill factor of 0.64, making this polymer a particularly promising candidate for high-efficiency low-cost polymer solar cells.
|
|
| 14. |
- Wang, Ergang, 1981, et al.
(författare)
-
Side-Chain Architectures of 2,7-Carbazole and Quinoxaline-Based Polymers for Efficient Polymer Solar Cells
- 2011
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 1520-5835 .- 0024-9297. ; 44:7, s. 2067-2073
-
Tidskriftsartikel (refereegranskat)abstract
- Three polymers bearing a common carbazole thiophene quinoxaline thiophene backbone, but different side chains, were designed and synthesized in order to investigate the effect of side chains on their photovoltaic performance. Their photophysical, electrochemical, and photovoltaic properties were investigated and compared. The polymer EWC3, with the largest amount of side chains, showed the highest power conversion efficiency of 3.7% with an open-circuit voltage (V-oc) of 0.92 V. The atomic force microscopy images of the active layers of the devices showed that the morphology was highly influenced by the choice of the solvent and processing additive. It is worth noting that polymer solar cells (PSCs) fabricated from EWC3, with branched side chains on the carbazole units, gave a much higher V-oc than the devices made from EWC1, which bears the same electron-deficient segment as EWC3 but straight side chains on carbazole units. This study offered a useful and important guideline for designing 2,7-carbazole-based polymers for high-performance PSCs.
|
|
| 15. |
- Wang, Ergang, 1981, et al.
(författare)
-
Small Band Gap Polymers Synthesized via a Modified Nitration of 4,7-Dibromo-2,1,3-benzothiadiazole
- 2010
-
Ingår i: Organic Letters. - : American Chemical Society (ACS). - 1523-7052 .- 1523-7060. ; 12:20, s. 4470-4473
-
Tidskriftsartikel (refereegranskat)abstract
- The nitration of 4,7-dibromo-2,1,3-benzothiadiazole was modified by using CF3SO3H and HNO3 as the nitrating agent, and the related yield was improved greatly. On the basis of this improvement, two new small band gap polymers, P1TPQ and P3TPQ, were developed. Bulk heterojunction solar cells based on P3TPO and [6,6]-phenyl-C-71-butyric acid methyl ester exhibit interesting results with a power conversion efficiency of 21% and photoresponse up to 1.1 mu m
|
|
| 16. |
- Zhou, Yi, et al.
(författare)
-
Black Polymers in Bulk-Heterojunction Solar Cells
- 2010
-
Ingår i: IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS. - : Institute of Electrical and Electronics Engineers (IEEE). - 1077-260X .- 1558-4542. ; 16:6, s. 1565-1572
-
Tidskriftsartikel (refereegranskat)abstract
- The active materials in polymer solar cells have a decisive role on the performance of the cells. Polymers with extended absorption, i.e., black polymers with absorption covering the whole visible region are desired in order to capture the important parts of the solar irradiation. Different ways of achieving black active materials are discussed and two new alternating polyfluorene (APFO) copolymers with broad absorption, APFO-Black 1 and APFO-Black 2, using two different design strategies are described. The UV-Vis absorption spectra of the polymers extend to approximately 850 nm, and the polymers were used as donors and [6,6]-phenyl-C-61-butyric acid methyl ester (PCBM)[60] or PCBM[70] as acceptors in solar cell devices in various mixing ratios. The best combinations yielded an overall power conversion efficiency of 1.2% for APFO-Black 1 and 1.5% for APFO-Black 2.
|
|
| 17. |
|
|
