| 71. |
|
|
| 72. |
|
|
| 73. |
- Ljungqvist, Göran, et al.
(författare)
-
Biomarker for welding exposure in exhaled endogenous particles
- 2014
-
Ingår i: The European respiratory journal. Supplement. - 0904-1850.
-
Konferensbidrag (refereegranskat)abstract
- More than two million workers are exposed to pneumotoxic welding aerosols and there is a need for target organ specific biomarkers of exposure. Manganese is a common constituent of iron alloys, its occupational exposure limit is low and other biomarkers are poor, which makes it a good model substance. We hypothesize that metal particles are deposited in the small airways and are incorporated into endogenous particles formed during respiration. A subsequent analysis of these particles in exhaled air (PEx) can serve as a biomarker for metals in welding fumes. We have recently developed a method for the collection of PEx (Almstrand, A.-C. et al. Anal Chem 2008; 81:662-668), based on counting of the exhaled particles and subsequent collection by impaction on a filter. Here we developed a method for analysis of trace metal content, i.e. manganese and iron in PEx. The method involved desorption of the filter in 5% nitric acid and analysis of the metal content by ICP-MS. To test our hypothesis, we exposed 9 healthy non-smokers (4F/5M, 29-63 years) to welding aerosol in an exposure chamber (Isaxon, C. et al. Aerosol Sci Tech 2012; 47:52-59) for two hours. Manganese and iron was analysed in PEx samples collected before, immediately after and 24 h after exposure. The results showed that 4 out of 9 persons had substantially increased levels of both manganese and iron in PEx immediately after exposure. Before exposure two samples had an iron content above limit of detection and none of the samples collected after 24 h. Manganese was below LOD in all samples collected before and 24 h after exposure. The study showed that the analysis of metals in PEx is a promising biomarker for metal aerosol exposure.
|
|
| 74. |
|
|
| 75. |
- Lovén, Karin, et al.
(författare)
-
Characterization of airborne particles from cleaning sprays and their corresponding respiratory deposition fractions
- 2019
-
Ingår i: Journal of Occupational and Environmental Hygiene. - : Informa UK Limited. - 1545-9624 .- 1545-9632. ; 16:9, s. 656-667
-
Tidskriftsartikel (refereegranskat)abstract
- Cleaning workers are exposed to many risk factors, including handling of cleaning products. Epidemiological studies show that they have a high incidence of asthma and other respiratory symptoms. Some studies have indicated an even higher incidence of asthma in individuals using cleaning sprays regularly. It is known that sprays produce an aerosol that can expose the respiratory system to chemicals. Knowledge of the physical characteristics of the airborne particles, as well as the characteristics of the gas phase, is needed to determine how they affect the respiratory tract and why they cause airway symptoms. The aim of this study was to characterize the aerosols from seven different ready-to-use trigger cleaning sprays in terms of total airborne mass fraction, particle size distribution, and new particle formation from ozone reactions. An additional aim was to calculate the respiratory deposition fraction of the measured particles. The total airborne mass fraction was determined by comparing the mass deposited on the chamber wall with the mass emitted from the bottle during spraying. Particle number concentration and size distribution of the airborne particles were measured using an aerodynamic particle sizer and a fast aerosol mobility size spectrometer. The total airborne mass fraction was between 2.7% and 32.2% of the mass emitted from the bottle, depending on the product. Between 0.0001% and 0.01% of the total airborne mass fraction consisted of residual particles. However, these particles had a mass median aerodynamic diameter between 1.9 µm and 3.7 µm, constituting a total respiratory deposition of up to 77%. New particle formation in the presence of ozone was also shown to vary between 5,000 cm−3 and 35,000 cm−3 depending on the product, in the studied settings. These findings confirm that a substantial part (up to 1/3) of the mass sprayed from the bottle does not reach the intended surface. Thus, the use of cleaning sprays can result in chemical airway exposure, with particles in the relevant size range for both nasal and alveolar deposition.
|
|
| 76. |
- Lovén, Karin, et al.
(författare)
-
Effects of cleaning spray use on eyes, airways, and ergonomic load
- 2023
-
Ingår i: BMC Public Health. - : Springer Science and Business Media LLC. - 1471-2458. ; 23:1
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundCleaning workers are exposed to chemicals and high physical workload, commonly resulting in airway problems and pain. In this study the response in the upper airways and the physical workload following airborne and ergonomic exposure of cleaning spray was investigated.MethodsA survey was answered by professional cleaning workers to investigate their use of cleaning sprays and the perceived effects on eyes, airways and musculoskeletal pain. A human chamber exposure study was then conducted with 11 professional cleaning workers and 8 non-professional cleaning workers to investigate the airborne exposure, acute effects on eyes and airways, and physical load during cleaning with sprays, foam application and microfiber cloths premoistened with water. All cleaning products used were bleach, chlorine, and ammonia free. The medical assessment included eye and airway parameters, inflammatory markers in blood and nasal lavage, as well as technical recordings of the physical workload.ResultsA high frequency of spray use (77%) was found among the 225 professional cleaning workers that answered the survey. Based on the survey, there was an eight times higher risk (p < 0.001) of self-experienced symptoms (including symptoms in the nose, eyes and throat, coughing or difficulty breathing) when they used sprays compared to when they cleaned with other methods. During the chamber study, when switching from spray to foam, the airborne particle and volatile organic compound (VOC) concentrations showed a decrease by 7 and 2.5 times, respectively. For the whole group, the peak nasal inspiratory flow decreased (-10.9 L/min, p = 0.01) during spray use compared to using only water-premoistened microfiber cloths. These effects were lower during foam use (-4.7 L/min, p = 0.19). The technical recordings showed a high physical workload regardless of cleaning with spray or with water.ConclusionSwitching from a spraying to a foaming nozzle decreases the exposure of both airborne particles and VOCs, and thereby reduces eye and airway effects, and does not increase the ergonomic load. If the use of cleaning products tested in this study, i.e. bleach, chlorine, and ammonia free, cannot be avoided, foam application is preferable to spray application to improve the occupational environment.
|
|
| 77. |
- Lovén, Karin, et al.
(författare)
-
Emissions and exposures of graphene nanomaterials, titanium dioxide nanofibers, and nanoparticles during down-stream industrial handling
- 2021
-
Ingår i: Journal of Exposure Science & Environmental Epidemiology. - : Springer Science and Business Media LLC. - 1559-064X .- 1559-0631. ; 31:4, s. 736-752
-
Tidskriftsartikel (refereegranskat)abstract
- Today, engineered nanomaterials are frequently used. Nanosized titanium dioxide (TiO2) has been extensively used for many years and graphene is one type of emerging nanomaterial. Occupational airborne exposures to engineered nanomaterials are important to ensure safe workplaces and to extend the information needed for complete risk assessments. The main aim of this study was to characterize workplace emissions and exposure of graphene nanoplatelets, graphene oxide, TiO2 nanofibers (NFs) and nanoparticles (NPs) during down-stream industrial handling. Surface contaminations were also investigated to assess the potential for secondary inhalation exposures. In addition, a range of different sampling and aerosol monitoring methods were used and evaluated. The results showed that powder handling, regardless of handling graphene nanoplatelets, graphene oxide, TiO2 NFs, or NPs, contributes to the highest particle emissions and exposures. However, the exposure levels were below suggested occupational exposure limits. It was also shown that a range of different methods can be used to selectively detect and quantify nanomaterials both in the air and as surface contaminations. However, to be able to make an accurate determination of which nanomaterial that has been emitted a combination of different methods, both offline and online, must be used.
|
|
| 78. |
- Lovén, Karin, et al.
(författare)
-
Size-resolved characterization of particles >10 nm emitted to air during metal recycling
- 2023
-
Ingår i: Environment International. - : Elsevier Ltd. - 0160-4120 .- 1873-6750. ; 174
-
Tidskriftsartikel (refereegranskat)abstract
- Background: In the strive towards a circular economy, metal waste recycling is a growing industry. During the recycling process, particulate matter containing toxic and allergenic metals will be emitted to the air causing unintentional exposure to humans and environment. Objective: In this study detailed characterization of particle emissions and workplace exposures were performed, covering the full size range from 10 nm to 10 µm, during recycling of three different material flows: Waste of electrical and electronic equipment (WEEE), metal scrap, and cables. Methods: Both direct-reading instruments (minute resolution), and time-integrated filter measurements for gravimetric and chemical analysis were used. Additionally, optical sensors were applied and evaluated for long-term online monitoring of air quality in industrial settings. Results: The highest concentrations, in all particle sizes, and with respect both to particle mass and number, were measured in the WEEE flow, followed by the metal scrap flow. The number fraction of nanoparticles was high for all material flows (0.66–0.86). The most abundant metals were Fe, Al, Zn, Pb and Cu. Other elements of toxicological interest were Mn, Ba and Co. Significance: The large fraction of nanoparticles, and the fact that their chemical composition deviate from that of the coarse particles, raises questions that needs to be further addressed including toxicological implications, both for humans and for the environment. © 2023 The Authors
|
|
| 79. |
- Lovén, Karin, et al.
(författare)
-
Toxicological effects of zinc oxide nanoparticle exposure : an in vitro comparison between dry aerosol air-liquid interface and submerged exposure systems
- 2021
-
Ingår i: Nanotoxicology. - : Taylor and Francis Ltd.. - 1743-5390 .- 1743-5404. ; 15:4, s. 494-510
-
Tidskriftsartikel (refereegranskat)abstract
- Engineered nanomaterials (ENMs) are increasingly produced and used today, but health risks due to their occupational airborne exposure are incompletely understood. Traditionally, nanoparticle (NP) toxicity is tested by introducing NPs to cells through suspension in the growth media, but this does not mimic respiratory exposures. Different methods to introduce aerosolized NPs to cells cultured at the air-liquid-interface (ALI) have been developed, but require specialized equipment and are associated with higher cost and time. Therefore, it is important to determine whether aerosolized setups induce different cellular responses to NPs than traditional ones, which could provide new insights into toxicological responses of NP exposure. This study evaluates the response of human alveolar epithelial cells (A549) to zinc oxide (ZnO) NPs after dry aerosol exposure in the Nano Aerosol Chamber for In Vitro Toxicity (NACIVT) system as compared to conventional, suspension-based exposure: cells at ALI or submerged. Similar to other studies using nebulization of ZnO NPs, we found that dry aerosol exposure of ZnO NPs via the NACIVT system induced different cellular responses as compared to conventional methods. ZnO NPs delivered at 1.0 µg/cm2 in the NACIVT system, mimicking occupational exposure, induced significant increases in metabolic activity and release of the cytokines IL-8 and MCP-1, but no differences were observed using traditional exposures. While factors associated with the method of exposure, such as differing NP aggregation, may contribute toward the different cellular responses observed, our results further encourage the use of more physiologically realistic exposure systems for evaluating airborne ENM toxicity. © 2021 The Author(s).
|
|
| 80. |
|
|
