| 11. |
- Aquilante, Francesco, et al.
(författare)
-
Molcas 8 : New capabilities for multiconfigurational quantum chemical calculations across the periodic table
- 2016
-
Ingår i: Journal of Computational Chemistry. - : Wiley. - 0192-8651 .- 1096-987X. ; 37:5, s. 506-541
-
Tidskriftsartikel (refereegranskat)abstract
- In this report, we summarize and describe the recent unique updates and additions to the Molcas quantum chemistry program suite as contained in release version 8. These updates include natural and spin orbitals for studies of magnetic properties, local and linear scaling methods for the Douglas-Kroll-Hess transformation, the generalized active space concept in MCSCF methods, a combination of multiconfigurational wave functions with density functional theory in the MC-PDFT method, additional methods for computation of magnetic properties, methods for diabatization, analytical gradients of state average complete active space SCF in association with density fitting, methods for constrained fragment optimization, large-scale parallel multireference configuration interaction including analytic gradients via the interface to the Columbus package, and approximations of the CASPT2 method to be used for computations of large systems. In addition, the report includes the description of a computational machinery for nonlinear optical spectroscopy through an interface to the QM/MM package Cobramm. Further, a module to run molecular dynamics simulations is added, two surface hopping algorithms are included to enable nonadiabatic calculations, and the DQ method for diabatization is added. Finally, we report on the subject of improvements with respects to alternative file options and parallelization.
|
|
| 12. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 13. |
- Beato, Marco, et al.
(författare)
-
Current Guidelines for the Implementation of Flywheel Resistance Training Technology in Sports: A Consensus Statement
- 2024
-
Ingår i: Sports Medicine. - : ADIS INT LTD. - 0112-1642 .- 1179-2035.
-
Forskningsöversikt (refereegranskat)abstract
- BackgroundFlywheel resistance training has become more integrated within resistance training programs in a variety of sports due to the neuromuscular, strength, and task-specific enhancements reported with this training.ObjectiveThis paper aimed to present the consensus reached by internationally recognized experts during a meeting on current definitions and guidelines for the implementation of flywheel resistance training technology in sports.MethodsNineteen experts from different countries took part in the consensus process; 16 of them were present at the consensus meeting (18 May 2023) while three submitted their recommendations by e-mail. Prior to the meeting, evidence summaries were developed relating to areas of priority. This paper discusses the available evidence and consensus process from which recommendations were made regarding the appropriate use of flywheel resistance training technology in sports. The process to gain consensus had five steps: (1) performing a systematic review of systematic reviews, (2) updating the most recent umbrella review published on this topic, (3) first round discussion among a sample of the research group included in this consensus statement, (4) selection of research group members-process of the consensus meeting and formulation of the recommendations, and (5) the consensus process. The systematic analysis of the literature was performed to select the most up-to-date review papers available on the topic, which resulted in nine articles; their methodological quality was assessed according to AMSTAR 2 (Assessing the Methodological Quality of Systematic Review 2) and GRADE (Grading Recommendations Assessment Development and Evaluation). Statements and recommendations scoring 7-9 were considered appropriate.ResultsThe recommendations were based on the evidence summary and researchers' expertise; the consensus statement included three statements and seven recommendations for the use of flywheel resistance training technology. These statements and recommendations were anonymously voted on and qualitatively analyzed. The three statements reported a score ranging from 8.1 to 8.8, and therefore, all statements included in this consensus were considered appropriate. The recommendations (1-7) had a score ranging from 7.7 to 8.6, and therefore, all recommendations were considered appropriate.ConclusionsBecause of the consensus achieved among the experts in this project, it is suggested that practitioners and researchers should adopt the guidelines reported in this consensus statement regarding the use of flywheel resistance technology in sports.
|
|
| 14. |
- Berg, Sven
(författare)
-
Ultra high-pressure compaction of powder
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Sintering at high-pressure improves the properties of the material, either through new sintering aids becoming available or through improving intergranular bonding. This gives the manufactured products potential advantages like faster cut rates, and more precise and cleaner production methods that add up to cost efficiency and competitive edge. The production of synthetic diamond products demands tooling that can achieve high pressures and deliver it with a high degree of certainty. The common denominator for almost all high-pressure systems is to use capsules where a powder material encloses the core material. Numerical analysis of manufacturing processes with working conditions that reach ultra high pressure (above 10 GPa) requires a constitutive model that can handle the specific behaviours of the powder from a low density to solid state. The work in this thesis deals with characterization and simulation of the material behaviour during high-pressure compaction in powder pressing. Some of the work was focused on investigating the material when used as compressible gasket in high-pressure systems. The aim was to increase the knowledge of the high-pressure pressing process. This includes a better understanding of how mean stress develops in the compact during pressing and an insight into the development material models concerning highpressure materials. Both experimental and numerical investigations were made to gain knowledge in these fields. The mechanical behaviour of a CaCO3 powder mix was investigated using the Brazilian disc test, uniaxial compression testing and closed die experiments. The aim of the experimental work was to provide a foundation for numerical simulation of CaCO3 powder compaction at higher pressures. Friction measurements of the powder were also conducted. From the experimental investigations, density dependent material parameters were found. An elasto-plastic Cap model was developed for ultra high-pressure powder pressing. To improve the material model, density dependent constitutive parameters were included. The model was implemented as a user-defined material subroutine in a nonlinear finite element program. The model was validated against pressure measurements using phase transitions of Bismuth. The measurements were conducted in a Bridgman anvil apparatus. The simulations showed that thin discs with small radial extrusion generate a plateau at a low-pressure level, while thick discs with large radial extrusion generate a pressure peak at a high-pressure level. The results showed that FE-results can be used to engineer pressure peaks needed to seal HPHT-systems. For compressible gaskets, it was found that diametral support increases the phase transformation load. Higher initial density of the powder compact and diametral support generate higher pressure per unit thickness. The results from the validation using pressure measurements showed that the simulation model was indeed capable of reproducing load–thickness curves and pressure profiles, up to 9 GPa, close to the experimental curves.
|
|
| 15. |
- Chan, Norman, et al.
(författare)
-
Contextual synthetic lethality of cancer cell kill based on the tumor microenvironment.
- 2010
-
Ingår i: Cancer Research. - 0008-5472 .- 1538-7445. ; 70:20, s. 8045-54
-
Tidskriftsartikel (refereegranskat)abstract
- Acute and chronic hypoxia exists within the three-dimensional microenvironment of solid tumors and drives therapy resistance, genetic instability, and metastasis. Replicating cells exposed to either severe acute hypoxia (16 hours with 0.02% O(2)) followed by reoxygenation or moderate chronic hypoxia (72 hours with 0.2% O(2)) treatments have decreased homologous recombination (HR) protein expression and function. As HR defects are synthetically lethal with poly(ADP-ribose) polymerase 1 (PARP1) inhibition, we evaluated the sensitivity of repair-defective hypoxic cells to PARP inhibition. Although PARP inhibition itself did not affect HR expression or function, we observed increased clonogenic killing in HR-deficient hypoxic cells following chemical inhibition of PARP1. This effect was partially reversible by RAD51 overexpression. PARP1(-/-) murine embryonic fibroblasts (MEF) showed a proliferative disadvantage under hypoxic gassing when compared with PARP1(+/+) MEFs. PARP-inhibited hypoxic cells accumulated γH2AX and 53BP1 foci as a consequence of altered DNA replication firing during S phase-specific cell killing. In support of this proposed mode of action, PARP inhibitor-treated xenografts displayed increased γH2AX and cleaved caspase-3 expression in RAD51-deficient hypoxic subregions in vivo, which was associated with decreased ex vivo clonogenic survival following experimental radiotherapy. This is the first report of selective cell killing of HR-defective hypoxic cells in vivo as a consequence of microenvironment-mediated "contextual synthetic lethality." As all solid tumors contain aggressive hypoxic cells, this may broaden the clinical utility of PARP and DNA repair inhibition, either alone or in combination with radiotherapy and chemotherapy, even in tumor cells lacking synthetically lethal, genetic mutations.
|
|
| 16. |
- de Groot, Frank M. F., et al.
(författare)
-
2p x-ray absorption spectroscopy of 3d transition metal systems
- 2021
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - : Elsevier BV. - 0368-2048 .- 1873-2526. ; 249
-
Tidskriftsartikel (refereegranskat)abstract
- This review provides an overview of the different methods and computer codes that are used to interpret 2p x-ray absorption spectra of 3d transition metal ions. We first introduce the basic parameters and give an overview of the methods used. We start with the semi-empirical multiplet codes and compare the different codes that are available. A special chapter is devoted to the user friendly interfaces that have been written on the basis of these codes. Next we discuss the first principle codes based on band structure, including a chapter on Density Functional theory based approaches. We also give an overview of the first-principle multiplet codes that start from a cluster calculation and we discuss the wavefunction based methods, including multi-reference methods. We end the review with a discussion of the link between theory and experiment and discuss the open issues in the spectral analysis.
|
|
| 17. |
- Delahaye-Sourdeix, Manon, et al.
(författare)
-
The 12p13.33/RAD52 locus and genetic susceptibility to squamous cell cancers of upper aerodigestive tract
- 2015
-
Ingår i: PLOS ONE. - : Public library science. - 1932-6203. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- Genetic variants located within the 12p13.33/RAD52 locus have been associated with lung squamous cell carcinoma (LUSC). Here, within 5,947 UADT cancers and 7,789 controls from 9 different studies, we found rs10849605, a common intronic variant in RAD52, to be also associated with upper aerodigestive tract (UADT) squamous cell carcinoma cases (OR = 1.09, 95% CI: 1.04-1.15, p = 6x10(-4)). We additionally identified rs10849605 as a RAD52 cis-eQTL inUADT(p = 1x10(-3)) and LUSC (p = 9x10(-4)) tumours, with the UADT/LUSC risk allele correlated with increased RAD52 expression levels. The 12p13.33 locus, encompassing rs10849605/RAD52, was identified as a significant somatic focal copy number amplification in UADT(n = 374, q-value = 0.075) and LUSC (n = 464, q-value = 0.007) tumors and correlated with higher RAD52 tumor expression levels (p = 6x10(-48) and p = 3x10(-29) in UADT and LUSC, respectively). In combination, these results implicate increased RAD52 expression in both genetic susceptibility and tumorigenesis of UADT and LUSC tumors.
|
|
| 18. |
- Dengler, Juergen, et al.
(författare)
-
GrassPlot - a database of multi-scale plant diversity in Palaearctic grasslands
- 2018
-
Ingår i: Phytocoenologia. - : Schweizerbart. - 0340-269X. ; 48:3, s. 331-347
-
Tidskriftsartikel (refereegranskat)abstract
- GrassPlot is a collaborative vegetation-plot database organised by the Eurasian Dry Grassland Group (EDGG) and listed in the Global Index of Vegetation-Plot Databases (GIVD ID EU-00-003). GrassPlot collects plot records (releves) from grasslands and other open habitats of the Palaearctic biogeographic realm. It focuses on precisely delimited plots of eight standard grain sizes (0.0001; 0.001;... 1,000 m(2)) and on nested-plot series with at least four different grain sizes. The usage of GrassPlot is regulated through Bylaws that intend to balance the interests of data contributors and data users. The current version (v. 1.00) contains data for approximately 170,000 plots of different sizes and 2,800 nested-plot series. The key components are richness data and metadata. However, most included datasets also encompass compositional data. About 14,000 plots have near-complete records of terricolous bryophytes and lichens in addition to vascular plants. At present, GrassPlot contains data from 36 countries throughout the Palaearctic, spread across elevational gradients and major grassland types. GrassPlot with its multi-scale and multi-taxon focus complements the larger international vegetationplot databases, such as the European Vegetation Archive (EVA) and the global database " sPlot". Its main aim is to facilitate studies on the scale-and taxon-dependency of biodiversity patterns and drivers along macroecological gradients. GrassPlot is a dynamic database and will expand through new data collection coordinated by the elected Governing Board. We invite researchers with suitable data to join GrassPlot. Researchers with project ideas addressable with GrassPlot data are welcome to submit proposals to the Governing Board.
|
|
| 19. |
- García-Lorenzo, Borja, et al.
(författare)
-
Assessment of the effectiveness, socio-economic impact and implementation of a digital solution for patients with advanced chronic diseases : the ADLIFE study protocol
- 2023
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI. - 1661-7827 .- 1660-4601. ; 20:4
-
Tidskriftsartikel (refereegranskat)abstract
- Due to population ageing and medical advances, people with advanced chronic diseases (ACD) live longer. Such patients are even more likely to face either temporary or permanent reduced functional reserve, which typically further increases their healthcare resource use and the burden of care on their caregiver(s). Accordingly, these patients and their caregiver(s) may benefit from integrated supportive care provided via digitally supported interventions. This approach may either maintain or improve their quality of life, increase their independence, and optimize the healthcare resource use from early stages. ADLIFE is an EU-funded project, aiming to improve the quality of life of older people with ACD by providing integrated personalized care via a digitally enabled toolbox. Indeed, the ADLIFE toolbox is a digital solution which provides patients, caregivers, and health professionals with digitally enabled, integrated, and personalized care, supporting clinical decisions, and encouraging independence and self-management. Here we present the protocol of the ADLIFE study, which is designed to provide robust scientific evidence on the assessment of the effectiveness, socio-economic, implementation, and technology acceptance aspects of the ADLIFE intervention compared to the current standard of care (SoC) when applied in real-life settings of seven different pilot sites across six countries. A quasi-experimental trial following a multicenter, non-randomized, non-concurrent, unblinded, and controlled design will be implemented. Patients in the intervention group will receive the ADLIFE intervention, while patients in the control group will receive SoC. The assessment of the ADLIFE intervention will be conducted using a mixed-methods approach.
|
|
| 20. |
- Gaudet, Mia M., et al.
(författare)
-
Common Genetic Variants and Modification of Penetrance of BRCA2-Associated Breast Cancer
- 2010
-
Ingår i: PLoS Genetics. - : Public Library of Science (PLoS). - 1553-7404. ; 6:10
-
Tidskriftsartikel (refereegranskat)abstract
- The considerable uncertainty regarding cancer risks associated with inherited mutations of BRCA2 is due to unknown factors. To investigate whether common genetic variants modify penetrance for BRCA2 mutation carriers, we undertook a two-staged genome-wide association study in BRCA2 mutation carriers. In stage 1 using the Affymetrix 6.0 platform, 592,163 filtered SNPs genotyped were available on 899 young (, 40 years) affected and 804 unaffected carriers of European ancestry. Associations were evaluated using a survival-based score test adjusted for familial correlations and stratified by country of the study and BRCA2*6174delT mutation status. The genomic inflation factor (lambda) was 1.011. The stage 1 association analysis revealed multiple variants associated with breast cancer risk: 3 SNPs had p-values, 10 25 and 39 SNPs had p-values<10(-4). These variants included several previously associated with sporadic breast cancer risk and two novel loci on chromosome 20 (rs311499) and chromosome 10 (rs16917302). The chromosome 10 locus was in ZNF365, which contains another variant that has recently been associated with breast cancer in an independent study of unselected cases. In stage 2, the top 85 loci from stage 1 were genotyped in 1,264 cases and 1,222 controls. Hazard ratios (HR) and 95% confidence intervals (CI) for stage 1 and 2 were combined and estimated using a retrospective likelihood approach, stratified by country of residence and the most common mutation, BRCA2*6174delT. The combined per allele HR of the minor allele for the novel loci rs16917302 was 0.75 (95% CI 0.66-0.86, p = 3: 8 x 10(-5)) and for rs311499 was 0.72 (95% CI 0.61-0.85, p = 6: 6 x 10(-5)). FGFR2 rs2981575 had the strongest association with breast cancer risk (per allele HR = 1.28, 95% CI 1.18-1.39, p = 1: 2 x 10(-8)). These results indicate that SNPs that modify BRCA2 penetrance identified by an agnostic approach thus far are limited to variants that also modify risk of sporadic BRCA2 wild-type breast cancer.
|
|
