| 21. |
- Hu, Zhipeng, et al.
(författare)
-
Wideband High-Reflection Chiral Dielectric Metasurface
- 2021
-
Ingår i: Progress In Electromagnetics Research. - : EMW PUBLISHING. - 1070-4698 .- 1559-8985. ; 172, s. 51-60
-
Tidskriftsartikel (refereegranskat)abstract
- Compared to natural materials, artificial subwavelength structures can enhance chiroptical effects in a stronger way, and the requirement of low material loss and wideband operation is desired in many situations. Here, we propose an all-dielectric chiral metasurface as a periodic array of centrosymmetric staggered silicon cuboid pairs to achieve strong circular dichroism in a wide band. As a demonstration, the designed chiral metasurface may strongly reflect the chosen circularly polarized light with the spin preserved in the operating wavelength range of 1.51 ti 1.60 mu m while highly transmit (with an efficiency greater than 95%) the opposite circularly polarized light with the spin flipped. Then, two application cases are given for the designed chiral metasurface. A flat chiral meta-lens is constructed to produce wideband focusing in the transmission/reflection side while the disturbing from the opposite circular polarization is well blocked by high reflection/transmission. A chiral Fabry-Perot cavity is also constructed, which has an extremely high quality factor (2.1E4). The proposed method provides an efficient way to produce strong chiroptical effects and has a promising potential for various applications such as signal processing, sensing, radiation and detection.
|
|
| 22. |
- Jiang, Di, 1983, et al.
(författare)
-
A flexible and stackable 3D interconnect system using growth-engineered carbon nanotube scaffolds
- 2017
-
Ingår i: Flexible and Printed Electronics. - : IOP Publishing. - 2058-8585. ; 2:2
-
Tidskriftsartikel (refereegranskat)abstract
- One of the critical challenges for realizing flexible electronic systems for a wide range of applications is the development of materials for flexible and stackable interconnects. We propose and demonstrate a three-dimensional (3D)interconnect structure embedded in a polymeric substrate using metal-coated carbon nanotube (CNT)scaffolds. By using two different underlayer materials for the catalyst, onestep synthesis of a dual-height CNT interconnect scaffold was realized. The CNT scaffolds serve as flexible cores for both annular metal through-substrate-vias and for horizontal metal interconnect. The 3D-CNT network was fabricated on a silicon substrate, and once the scaffolds were covered by metal, they were embedded in a polymer serving as a flexible substrate after peel-off from the silicon substrate. The 3D-CNT interconnect network was exposed to mechanical bending and stretching tests while monitoring its electrical properties. Even after 300 cycles no significant increase of resistances was found. Electrically there is a trade-off between flexibility and conductivity due to the surface roughness of the scaffold. However, this is to some extent alleviated by the metalized sidewalls giving the horizontal wires a cross-sectional area larger than indicated by their footprint. For gold wires 200 nm thick, measurements indicated a resistivity of 18 μΩ.cm, a value less than one order of magnitude larger than that of bulk gold, and a value that is expected to improve as technology improves. The mechanical properties of the metalized scaffolds were simulated using a finite element model. The potential scale-up capability of the proposed 3D-CNT network was demonstrated by the stacking of two such polymer-embedded interconnect systems.
|
|
| 23. |
- Li, Guowei, et al.
(författare)
-
Carbon-Tailored Semimetal MoP as an Efficient Hydrogen Evolution Electrocatalyst in Both Alkaline and Acid Media
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:24
-
Tidskriftsartikel (refereegranskat)abstract
- The electrolysis processes such as hydrogen evolution reaction (HER) require high efficient catalysts with robust surface stability. A high conductivity is also necessary to speed up the charge transport between the catalyst and the electrolyte. Recently, the observation of exceedingly high conductivity in the topological semimetal MoP, has provided a model catalyst to investigate the correlation between the electrical transport and the electrocatalytic activity for the HER. Thus, MoP is encapsulated in a Mo, P codoped carbon layer (MoP@C). This composite material exhibits outstanding HER performance, with an extremely low overpotential of 49 mV at a current density of 10 mA cm(-2) and a Tafel slope of 54 mV dec(-1) in an alkaline medium. In addition, electron transport analysis indicates that MoP exhibits high conductivity and mobility due to the existence of triple-point fermions and a complex Fermi surface. Furthermore, the presence of P-C and Mo-C bonds at the interface between the carbon layer and the MoP particles modulates the band structure of MoP@C and facilitates fast electron transfer, accumulation, and subsequent delocalization, which are in turn responsible for the excellent HER activity.
|
|
| 24. |
- Li, Xinxuan, et al.
(författare)
-
Genetically predicted high IGF-1 levels showed protective effects on COVID-19 susceptibility and hospitalization : a Mendelian randomisation study with data from 60 studies across 25 countries
- 2022
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Epidemiological studies observed gender differences in COVID-19 outcomes, however, whether sex hormone plays a causal in COVID-19 risk remains unclear. This study aimed to examine associations of sex hormone, sex hormones-binding globulin (SHBG), insulin-like growth factor-1 (IGF-1), and COVID-19 risk. Methods: Two-sample Mendelian randomization (TSMR) study was performed to explore the causal associations between testosterone, estrogen, SHBG, IGF-1, and the risk of COVID-19 (susceptibility, hospitalization, and severity) using genome-wide association study (GWAS) summary level data from the COVID-19 Host Genetics Initiative (N=1,348,701). Random-effects inverse variance weighted (IVW) MR approach was used as the primary MR method and the weighted median, MR-Egger, and MR Pleiotropy RESidual Sum and Outlier (MR-PRESSO) test were conducted as sensitivity analyses. Results: Higher genetically predicted IGF-1 levels have nominally significant association with reduced risk of COVID-19 susceptibility and hospitalization. For one standard deviation increase in genetically predicted IGF-1 levels, the odds ratio was 0.77 (95% confidence interval [CI], 0.61-0.97, p=0.027) for COVID-19 susceptibility, 0.62 (95% CI: 0.25-0.51, p=0.018) for COVID-19 hospitalization, and 0.85 (95% CI: 0.52-1.38, p=0.513) for COVID-19 severity. There was no evidence that testosterone, estrogen, and SHBG are associated with the risk of COVID-19 susceptibility, hospitalization, and severity in either overall or sex-stratified TSMR analysis. Conclusions: Our study indicated that genetically predicted high IGF-1 levels were associated with decrease the risk of COVID-19 susceptibility and hospitalization, but these associations did not survive the Bonferroni correction of multiple testing. Further studies are needed to validate the findings and explore whether IGF-1 could be a potential intervention target to reduce COVID-19 risk.
|
|
| 25. |
- Liu, Wen-Chun, et al.
(författare)
-
Genotyping of Hepatitis B Virus - Genotypes A to G by Multiplex Polymerase Chain Reaction
- 2008
-
Ingår i: Intervirology. - : S. Karger AG. - 0300-5526 .- 1423-0100. ; 51:4, s. 247-252
-
Tidskriftsartikel (refereegranskat)abstract
- <i>Objectives:</i> Eight genotypes (A–H) of hepatitis B virus (HBV) are known with variations in nucleotide sequences greater than 8%. Several recent publications found that the clinical course and outcome of antiviral therapy depended on the genotype of the infecting HBV strain. Large epidemiological studies will require the availability of a system which is rapid, reliable and can be performed on a large number of samples. <i>Methods:</i> To establish a simple and accurate genotyping method, the study collected 369 HBV complete genomic sequences from the GenBank database. Type-specific primers were also designed that separated HBV genotypes A to G by multiplex polymerase chain reaction. <i>Results:</i> By comparison with the traditional restriction fragment length polymorphism method, over 93% of 441 samples were accurately genotyped by current assay, with a higher detection rate and sensitivity to detect mixed HBV infections. <i>Conclusions:</i> This methodology can be applied only to areas prevalent with HBV genotypes A to G. However, it provides an efficient alternative for clinical diagnosis and large-scale studies.
|
|
| 26. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 27. |
- Nan, Pan, et al.
(författare)
-
Design of the laser gun bullets based on microcontroller
- 2018
-
Ingår i: ICEMI 2017 - Proceedings of IEEE 13th International Conference on Electronic Measurement and Instruments. - : Institute of Electrical and Electronics Engineers Inc.. - 9781509050345 ; , s. 68-72
-
Konferensbidrag (refereegranskat)abstract
- Police lab for testing requirements bullet speed, we designed a microcontroller based on the laser gun. The microcontroller as the core for speedometer, with laser detection plate module, thermal Printer module, display and buttons module, USB data interface module, wireless modules and stable voltage module, it can measure the speed of a series of work by Ligation of these modules. First, fired projectiles for testing by the laser detection plate module. Then, Transfer the detected data into the microcontroller. In the microcontroller detection data is processed and then printed out by thermal printer. Via USB data interface for data uploaded to a computer to save. While on the steps required to be operated by the controller. © 2017 IEEE.
|
|
| 28. |
- Ning, Zhongrui, et al.
(författare)
-
Wetter trend in source region of Yangtze River by runoff simulating based on Grid-RCCC-WBM
- 2024
-
Ingår i: Journal of Hydrology. - 0022-1694. ; 631
-
Tidskriftsartikel (refereegranskat)abstract
- Exploring the future hydroclimatic conditions of source region of Yangtze River (SRYaR), an alpine affected by climate change significantly, is essential for basin water resources management and development ss global climate change intensifies and the process of climate warming and humidification in Northwest China. This study proposed a practical framework for assessing water resource response to the context of climate changes in alpine catchments from the respective of both runoff and hydroclimatic conditions. Utilizing Grid-RCCC-WBM driven by corrected climatic forcing from the global climate models, this study estimate the prospective overall warmer and wetter pattern in the source region of Yangtze River. The key results indicated that: (1) Under all future scenarios, both temperature and precipitation within the catchment exhibit a significant upward trend. Projections from multi-model ensembles (MME) suggest that during the mid-term period (2041–2060, MT), temperatures are expected to rise by [0.74 °C, 3.08 °C] compared to the baseline period (1995–2014), with precipitation changes ranging from [4.8%, 21.4%]. (2) Future runoff within the catchment exhibits a consistent increase, with a linear trend rate of 1.1 mm/decade. runoff changes in MT compared to the baseline period vary from [−5.1%, 33.7%]. Runoff decreases in the northern part of the catchment, while notable increases occur in the southeastern and western regions. (3) In the future, the ratio of catchment evaporation capacity to precipitation decreases in comparison to the baseline period with an augmentation in soil moisture, enhancing its capacity for water retention and reducing the conversion of precipitation to evaporation, resulting a wetting trend of the catchment. (4) The future snowpack in the catchment continues to decrease, with a significant reduction in both the proportion of snowfall relative to total precipitation and the proportion of snowmelt runoff relative to total runoff, the risk of water resources crisis in the watershed is escalating.
|
|
| 29. |
- Pan, Nan, et al.
(författare)
-
Efficient matching technique for laser detection features of cable cutting traces
- 2017
-
Ingår i: Guangxue Jingmi Gongcheng/Optics and Precision Engineering. - : Chinese Academy of Sciences. - 1004-924X. ; 25, s. 183-190
-
Tidskriftsartikel (refereegranskat)abstract
- A lot of line traces on the bearing surface of broken ends which usually present nonlinear morphological features and have strong randomness were left in the crime scene of cable cutting case. In order to implement trace feature matching and affiliated tool inference more rapidly, an efficient matching technique for laser detection features of cable cutting traces was designed: K-Means clustering was used to implement abnormal data correction for 1-D signals picked up on the surface of broken ends detected by single-point laser displacement sensor firstly, and then self-adaptation correction of rotation angle was implemented to unify matching datum. Finally, matching strategy based on threshold sequences was used to realize overlap ratio matching of trace feature similarity, thus realizing quick inference of corresponding tools, and cutting tool interference experiment by actual traces verifies practicability and effectiveness of the technique. © 2017, Science Press. All right reserved.
|
|
| 30. |
- Pan, Yitao, et al.
(författare)
-
First Report on the Occurrence and Bioaccumulation of Hexafluoropropylene Oxide Trimer Acid : An Emerging Concern
- 2017
-
Ingår i: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 51:17, s. 9553-9560
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we report on the occurrence of a novel perfluoroalkyl ether carboxylic acid, ammonium perfluoro-2-[(propoxy)propoxy]-1-propanoate (HFPO-TA), in surface water and common carp (Cyprinus carpio) collected from the Xiaoqing River and in 'residents residing near a fluoropolymer production plant in Huantai County, China. Compared with the levels upstream of the Xiaoqing River, HFPO-TA concentrations (5200-68500 ng/L) were approximately 120-1600-times higher downstream after receiving fluoropolymer plant effluent from a tributary. The riverine discharge' of HFPO-TA was estimated to be 4.6 t/yr, accounting for 22% of total PFAS discharge. In the wild common carp collected downstream from the point source, HFPO-TA was detected in the blood (median: 1510 ng/mL), liver (587 ng/g ww), and muscle (118 ng/g ww). The log BCFbiood of HFPO-TA (2.18) was significantly higher than that of PFOA (1.93). Detectable levels of HFPO-TA were also found in the sera of residents (median: 2.93 ng/mL). This is the first report on the environmental occurrence and bioaccumulation of this novel chemical. Our results indicate an emerging usage of HFPO-TA in the fluoropolymer manufacturing industry and raise concerns about the toxicity and potential health risks of HFPO-TA to aquatic organisms and humans.
|
|
