| 61. |
- Fhager, Andreas, 1976, et al.
(författare)
-
3D Simulations of Intracerebral Hemorrhage Detection Using Broadband Microwave Technology
- 2019
-
Ingår i: Sensors. - : MDPI AG. - 1424-8220. ; 19:16
-
Tidskriftsartikel (refereegranskat)abstract
- Early, preferably prehospital, detection of intracranial bleeding after trauma or stroke would dramatically improve the acute care of these large patient groups. In this paper, we use simulated microwave transmission data to investigate the performance of a machine learning classification algorithm based on subspace distances for the detection of intracranial bleeding. A computational model, consisting of realistic human head models of patients with bleeding, as well as healthy subjects, was inserted in an antenna array model. The Finite-Difference Time-Domain (FDTD) method was then used to generate simulated transmission coefficients between all possible combinations of antenna pairs. These transmission data were used both to train and evaluate the performance of the classification algorithm and to investigate its ability to distinguish patients with versus without intracranial bleeding. We studied how classification results were affected by the number of healthy subjects and patients used to train the algorithm, and in particular, we were interested in investigating how many samples were needed in the training dataset to obtain classification results better than chance. Our results indicated that at least 200 subjects, i.e., 100 each of the healthy subjects and bleeding patients, were needed to obtain classification results consistently better than chance (p < 0.05 using Student's t-test). The results also showed that classification results improved with the number of subjects in the training data. With a sample size that approached 1000 subjects, classifications results characterized as area under the receiver operating curve (AUC) approached 1.0, indicating very high sensitivity and specificity.
|
|
| 62. |
- Forcolin, Fabio, et al.
(författare)
-
Comparison of outlier heartbeat identification and spectral transformation strategies for deriving heart rate variability indices for drivers at different stages of sleepiness
- 2018
-
Ingår i: Traffic Injury Prevention. - : Taylor & Francis. - 1538-9588 .- 1538-957X. ; 19, s. S112-S119
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Appropriate preprocessing for detecting and removing outlier heartbeats and spectral transformation is essential for deriving heart rate variability (HRV) indices from cardiac monitoring data with high accuracy. The objective of this study is to evaluate agreement between standard preprocessing methods for cardiac monitoring data used to detect outlier heartbeats and perform spectral transformation, in relation to estimating HRV indices for drivers at different stages of sleepiness.Methods: The study analyzed more than 3,500 5-min driving epochs from 76 drivers on a public motorway in Sweden. Electrocardiography (ECG) data were recorded in 3 studies designed to evaluate the physiological differences between awake and sleepy drivers. The Pan-Tompkins algorithm was used for peak detection of heartbeats from ECG data. Two standard methods were used for identifying outlier heartbeats: (1) percentage change (PC), where outliers were defined as interbeat interval deviating >30% from the mean of the 4 previous intervals, and (2) standard deviation (SD), where outliers were defined as interbeat interval deviating >4 SD from the mean interval duration in the current epoch. Three standard methods were used for spectral transformation, which is needed for deriving HRV indices in the frequency domain; these methods were (1) the Fourier transform; (2) an autoregressive model; and (3) the Lomb-Scargle periodogram. The preprocessing methods were compared quantitatively and by assessing agreement between estimations of 13 common HRV indices using Bland-Altman plots and paired Student's t-tests.Results: The PC method detected more than 4times as many outliers (0.28%) than SD (0.065%). Most HRV indices derived using different preprocessing methods exhibited significant systematic (P <.05) and substantial random variations.Conclusions: The standard preprocessing methods for HRV data for outlier heartbeat detection and spectral transformation show low levels of agreement. This finding implies that, prior to designing algorithms for detection of sleepy drivers based on HRV analysis, the impact of different preprocessing methods and combinations thereof on driver sleepiness assessment needs to be studied.
|
|
| 63. |
- Forsman, Mikael, Professor, et al.
(författare)
-
Mind the gap – development of conversion models between accelerometer- and IMU-based measurements of arm and trunk postures and movements in warehouse work
- 2022
-
Ingår i: Applied Ergonomics. - : Elsevier BV. - 0003-6870 .- 1872-9126. ; 105
-
Tidskriftsartikel (refereegranskat)abstract
- Sensor type (accelerometers only versus inertial measurement units, IMUs) and angular velocity computational method (inclination versus generalized velocity) have been shown to affect the measurements of arm and trunk movements. This study developed models for conversions between accelerometer and IMU measurements of arm and trunk inclination and between accelerometer and IMU measurements of inclination and generalized (arm) velocities. Full-workday recordings from accelerometers and IMUs of arm and trunk postures and movements from 38 warehouse workers were used to develop 4 angular (posture) and 24 angular velocity (movement) conversion models for the distributions of the data. A power function with one coefficient and one exponent was used, and it correlated well (r2 > 0.999) in all cases to the average curves comparing one measurement with another. These conversion models facilitate the comparison and merging of measurements of arm and trunk movements collected using the two sensor types and the two computational methods.
|
|
| 64. |
- Fredén Jansson, Karl-Johan, 1988
(författare)
-
The Balanced Electromagnetic Separation Transducer for Bone Conduction Audiometry and Hearing Rehabilitation
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Hearing via air conduction (AC) and bone conduction (BC) are attributed to bethe natural ways of conducting sound to the cochlea. With AC hearing, air pressurevariations are transmitted to the cochlea via the ear canal, whereas with BChearing, sound vibrations are transmitted through the skull bone to the cochlea.Patients with a hearing loss in the cochlea or auditory nerve are commonly rehabilitatedwith conventional AC hearing aids in the ear canal, but also using cochlearimplants. If the pathway for AC sound to reach the cochlea is obstructed, patientscan often benet from bone conduction devices (BCDs). In order to determinethe type and degree of hearing loss, the BC hearing thresholds are measured usinga bone conduction vibrator, and then analyzed together with the AC hearingthresholds for the diagnosis and to suggest an appropriate rehabilitation alternative.The motor unit in conventional BCDs and bone vibrators are known togenerate high amount of distortion at low frequencies where the Balanced ElectromagneticSeparation Transducer (BEST) principle may oer a new era in BChearing rehabilitation and audiometry.This thesis combines two BC hearing related topics, where the rst topic is anevaluation of a new audiometric bone vibrator, Radioear B81, which is assumedto oer more accurate BC hearing threshold measurements. The second topic isrelated to a new type of active transcutaneous BCD, called the Bone ConductionImplant (BCI), which leaves the skin intact by using a wireless solution thatdoes not require a permanent skin penetration. Even though the applications aredierent, both devices use the BEST principle as motor unit in their design.The audiometric bone vibrator Radioear B81 was found to have an improvedperformance at low frequencies where it can produce higher output levels with lessharmonic distortion than the conventional Radioear B71. In a clinical study of therst six patients, the BCI was found as ecient as already commercially availableBCDs, and with the advantage of not needing a skin penetration. In a technicalevaluation of the BCI, it was shown to be a mechanically robust design and totolerate magnetic resonance imaging at 1.5 Tesla.
|
|
| 65. |
- Geng, Zeyang, 1991, et al.
(författare)
-
Validity of solid-state Li + diffusion coefficient estimation by electrochemical approaches for lithium-ion batteries
- 2022
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 404
-
Tidskriftsartikel (refereegranskat)abstract
- The solid-state diffusion coefficient of the electrode active material is one of the key parameters in lithium-ion battery modelling. Conventionally, this diffusion coefficient is estimated through the galvanostatic intermittent titration technique (GITT). In this work, the validity of GITT and a faster alternative technique, intermittent current interruption (ICI), are investigated regarding their effectiveness through a black-box testing approach. A Doyle-Fuller-Newman model with parameters for a LiNi0.8Mn0.1Co0.1O2 electrode is used as a fairly faithful representation as a real battery system, and the GITT and ICI experiments are simulated to extract the diffusion coefficient. With the parameters used in this work, the results show that both the GITT and ICI methods can identify the solid-state diffusion coefficient very well compared to the value used as input into the simulation model. The ICI method allows more frequent measurement but the experiment time is 85% less than what takes to perform a GITT test. Different fitting approaches and fitting length affected the estimation accuracy, however not significantly. Moreover, a thinner electrode, a higher C-rate and a greater electrolyte diffusion coefficient will lead to an estimation of a higher solid-state diffusion coefficient, generally closer to the target value.
|
|
| 66. |
- Gil Berrocal, Carlos, 1986, et al.
(författare)
-
Crack monitoring in reinforced concrete beams by distributed optical fiber sensors
- 2021
-
Ingår i: Structure and Infrastructure Engineering. - : Informa UK Limited. - 1573-2479 .- 1744-8980. ; 17:1, s. 124-139
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates the use of distributed optical fiber sensors (DOFS) based on Optical Frequency Domain Reflectometry of Rayleigh backscattering for Structural Health Monitoring purposes in civil engineering structures. More specifically, the results of a series of laboratory experiments aimed at assessing the suitability and accuracy of DOFS for crack monitoring in reinforced concrete members subjected to external loading are reported. The experiments consisted on three-point bending tests of concrete beams, where a polyamide-coated optical fiber sensor was bonded directly onto the surface of an unaltered reinforcement bar and protected by a layer of silicone. The strain measurements obtained by the DOFS system exhibited an accuracy equivalent to that provided by traditional electrical foil gauges. Moreover, the analysis of the high spatial resolution strain profiles provided by the DOFS enabled the effective detection of crack formation. Furthermore, the comparison of the reinforcement strain profiles with measurements from a digital image correlation system revealed that determining the location of cracks and tracking the evolution of the crack width over time were both feasible, with most errors being below +/- 3 cm and +/- 20 mu m, for the crack location and crack width, respectively.
|
|
| 67. |
- Grishenkov, Dmitry, 1983-, et al.
(författare)
-
In search of the optimal ultrasound heart perfusion imaging platform
- 2015
-
Ingår i: Journal of ultrasound in medicine. - : Wiley. - 0278-4297 .- 1550-9613. ; 34:9, s. 1599-1605
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectiveQuantification of the myocardial perfusion by contrast echocardiography (CEC) remains a challenge. Existing imaging phantoms used to evaluate the performance of ultrasound scanners do not comply with perfusion basics in the myocardium, where perfusion and motion are inherently coupled.MethodsTo contribute towards an improvement, we developed a CEC perfusion imaging platform based on isolated rat heart coupled to the ultrasound scanner. Perfusion was assessed using three different types of contrast agent: dextran-based Promiten®, phospholipid-shelled SonoVue®, and polymer-shelled MB-pH5-RT. The myocardial video-intensity was monitored over time from contrast administration to peak and two characteristic constants were calculated using exponential fit (A representing capillary volume and b representing inflow velocity).ResultsAcquired experimental evidence demonstrates that the application of all three types of contrast agent allow ultrasonic estimation of myocardial perfusion in the isolated rat heart. Video-intensity maps show that an increase in contrast concentration increases the late plateau values, A, mimicking increased capillary volume. Estimated values of the flow, proportional to Axb, increase when the pressure of the perfusate column increases from 80 to 110 cm of water. This finding is in agreement with the true values of the coronary flow increase measured by the flowmeter attached to the aortic cannula.ConclusionsThe described CEC perfusion imaging platform holds promise for standardized evaluation and optimization of ultrasound contrast perfusion imaging where real time inflow curves at low acoustic power semi-quantitatively reflect coronary flow.
|
|
| 68. |
- Isaksson-Daun, Johan
(författare)
-
A Sound Approach Toward a Mobility Aid for Blind and Low-Vision Individuals
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Reduced independent mobility of blind and low-vision individuals (BLVIs) cause considerable societal cost, burden on relatives, and reduced quality of life for the individuals, including increased anxiety, depression symptoms, need of assistance, risk of falls, and mortality. Despite the numerous electronic travel aids proposed since at least the 1940’s, along with ever-advancing technology, the mobility issues persist. A substantial reason for this is likely several and severe shortcomings of the field, both in regards to aid design and evaluation.In this work, these shortcomings are addressed with a generic design model called Desire of Use (DoU), which describes the desire of a given user to use an aid for a given activity. It is then applied on mobility of BLVIs (DoU-MoB), to systematically illuminate and structure possibly all related aspects that such an aid needs to aptly deal with, in order for it to become an adequate aid for the objective. These aspects can then both guide user-centered design as well as choice of test methods and measures.One such measure is then demonstrated in the Desire of Use Questionnaire for Mobility of Blind and Low-Vision Individuals (DoUQ-MoB), an aid-agnostic and comprehensive patient-reported outcome measure. The question construction originates from the DoU-MoB to ensure an encompassing focus on mobility of BLVIs, something that has been missing in the field. Since it is aid-agnostic it facilitates aid comparison, which it also actively promotes. To support the reliability of the DoUQ-MoB, it utilizes the best known practices of questionnaire design and has been validated once with eight orientation and mobility professionals, and six BLVIs. Based on this, the questionnaire has also been revised once.To allow for relevant and reproducible methodology, another tool presented herein is a portable virtual reality (VR) system called the Parrot-VR. It uses a hybrid control scheme of absolute rotation by tracking the user’s head in reality, affording intuitive turning; and relative movement where simple button presses on a controller moves the virtual avatar forward and backward, allowing for large-scale traversal while not walking physically. VR provides excellent reproducibility, making various aggregate movement analysis feasible, while it is also inherently safe. Meanwhile, the portability of the system facilitates testing near the participants, substantially increasing the number of potential blind and low-vision recruits for user tests.The thesis also gives a short account on the state of long-term testing in the field; it being short is mainly due to that there is not much to report. It then provides an initial investigation into possible outcome measures for such tests by taking instruments in use by Swedish orientation and mobility professionals as a starting point. Two of these are also piloted in an initial single-session trial with 19 BLVIs, and could plausibly be used for long-term tests after further evaluation.Finally, a discussion is presented regarding the Audomni project — the development of a primary mobility aid for BLVIs. Audomni is a visuo-auditory sensory supplementation device, which aims to take visual information and translate it to sound. A wide field-of-view, 3D-depth camera records the environment, which is then transformed to audio through the sonification algorithms of Audomni, and finally presented in a pair of open-ear headphones that do not block out environmental sounds. The design of Audomni leverages the DoU-MoB to ensure user-centric development and evaluation, in the aim of reaching an aid with such form and function that it grants the users better mobility, while the users still want to use it.Audomni has been evaluated with user tests twice, once in pilot tests with two BLVIs, and once in VR with a heterogenous set of 19 BLVIs, utilizing the Parrot-VR and the DoUQ-MoB. 76 % of responders (13 / 17) answered that it was very or extremely likely that they would want use Audomni along with their current aid. This might be the first result in the field demonstrating a majority of blind and low-vision participants reporting that they actually want to use a new electronic travel aid. This shows promise that eventual long-term tests will demonstrate an increased mobility of blind and low-vision users — the overarching project aim. Such results would ultimately mean that Audomni can become an aid that alleviates societal cost, reduces burden on relatives, and improves users’ quality of life and independence.
|
|
| 69. |
|
|
| 70. |
- Jalkanen, Ville, 1978-, et al.
(författare)
-
Explanatory models for a tactile resonance sensor system-elastic and density-related variations of prostate tissue in vitro
- 2008
-
Ingår i: Physiological Measurement. - Bristol : IOP Publ. Ltd. - 0967-3334 .- 1361-6579. ; 29:7, s. 729-745
-
Tidskriftsartikel (refereegranskat)abstract
- Tactile sensors based on piezoelectric resonance have been adopted for medical applications. The sensor consists of an oscillating piezoelectric sensor–circuit system, and a change in resonance frequency is observed when the sensor tip contacts a measured object such as tissue. The frequency change at a constant applied force or mass load is used as a stiffness-sensitive parameter in many applications. Differential relations between force and frequency have also been used for monitoring intraocular pressure and stiffness variations in prostate tissue in vitro. The aim of this study was to relate the frequency change (Δf), measured force (F) and the material properties, density and elasticity to an explanatory model for the resonance sensor measurement principle and thereby to give explanatory models for the stiffness parameters used previously. Simulations of theoretical equations were performed to investigate the relation between frequency change and contact impedance. Measurements with a resonance sensor system on prostate tissue in vitro were used for experimental validation of the theory. Tissue content was quantified with a microscopic-based morphometrical method. Simulation results showed that the frequency change was dependent upon density (ρ) and contact area (S) according to Δf ∝ ρS3/2. The experiments followed the simulated theory at small impression depths. The measured contact force followed a theoretical model with the dependence of the elastic modulus (E) and contact area, F ∝ ES3/2. Measured density variations related to histological variations were statistically weak or non-significant. Elastic variations were statistically significant with contributions from stroma and cancer relative to normal glandular tissue. The theoretical models of frequency change and force were related through the contact area, and a material-dependent explanatory model was found as Δf ∝ ρE−1F. It explains the measurement principle and the previously established stiffness parameters from the material properties point of view.
|
|
