| 1. |
- Mamontov, Eugen, 1955, et al.
(författare)
-
The minimal, phase-transition model for the cell-number maintenance by the hyperplasia-extended homeorhesis
- 2006
-
Ingår i: Acta Biotheoretica. - : Springer Science and Business Media LLC. - 0001-5342 .- 1572-8358. ; 54:2, s. 61-101
-
Tidskriftsartikel (refereegranskat)abstract
- Oncogenic hyperplasia is the first and inevitable stage of formation of a (solid) tumor. This stage is also the core of many other proliferative diseases. The present work proposes the first minimal model that combines homeorhesis with oncogenic hyperplasia where the latter is regarded as a genotoxically activated homeorhetic dysfunction. This dysfunction is specified as the transitions of the fluid of cells from a fluid, homeorhetic state to a solid, hyperplastic-tumor state, and back. The key part of the model is a nonlinear reaction-diffusion equation (RDE) where the biochemical-reaction rate is generalized to the one in the well-known Schlögl physical theory of the non-equilibrium phase transitions. A rigorous analysis of the stability and qualitative aspects of the model, where possible, are presented in detail. This is related to the spatially homogeneous case, i.e. when the above RDE is reduced to a nonlinear ordinary differential equation. The mentioned genotoxic activation is treated as a prevention of the quiescent G0-stage of the cell cycle implemented with the threshold mechanism that employs the critical concentration of the cellular fluid and the nonquiescent-cell-duplication time. The continuous tumor morphogeny is described by a time-space-dependent cellular-fluid concentration. There are no sharp boundaries (i.e. no concentration jumps exist) between the domains of the homeorhesis- and tumor-cell populations. No presumption on the shape of a tumor is used. To estimate a tumor in specific quantities, the model provides the time-dependent tumor locus, volume, and boundary that also points out the tumor shape and size. The above features are indispensable in the quantitative development of antiproliferative drugs or therapies and strategies to prevent oncogenic hyperplasia in cancer and other proliferative diseases. The work proposes an analytical-numerical method for solving the aforementioned RDE. A few topics for future research are suggested.
|
|
| 2. |
- Fransson, Eleonor I., et al.
(författare)
-
The Association between Job Strain and Atrial Fibrillation : Results from the Swedish WOLF Study
- 2015
-
Ingår i: BioMed Research International. - : Hindawi Publishing Corporation. - 2314-6133 .- 2314-6141.
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Atrial fibrillation (AF) is a common heart rhythmdisorder. Several life-style factors have been identified as risk factors for AF, but less is known about the impact of work-related stress. This study aims to evaluate the association between work-related stress, defined as job strain, and risk of AF. Methods: Data from the Swedish WOLF study was used, comprising 10,121 working men and women. Job strain was measured by the demand-control model. Information on incident AF was derived from national registers. Cox proportional hazard regression was used to estimate hazard ratios (HR) and 95% confidence intervals (CI) for the association between job strain and AF risk. Results: In total, 253 incident AF cases were identified during a total follow-up time of 132,387 person-years. Job strain was associated with AF risk in a time-dependent manner, with stronger association after 10.7 years of follow-up (HR 1.93, 95% CI 1.10-3.36 after 10.7 years, versus HR 1.11, 95% CI 0.67-1.83 before 10.7 years). The results pointed towards a dose-response relationship when taking accumulated exposure to job strain over time into account. Conclusion: This study provides support to the hypothesis that work-related stress defined as job strain is linked to an increased risk of AF.
|
|
| 3. |
- Sukhovey, Yurij G., et al.
(författare)
-
Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference
- 2019
-
Ingår i: Biomedical Dermatology. - : Springer Nature. - 2398-8460. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Present research addresses the issue of skin aging and corresponding skin treatment individualization. Particular research question was on the developing of simplified criterion supporting patient-specific decision on the necessity and intensity of skin treatment. Basing on the published results and a wide pool of experimental data, we have formulated a hypothesis that a difference between biologic and chronologic age can be used as an express criterion of skin aging.Methods: In present paper, we report the results of studies with 80 volunteers between 15 and 65 years of age, linking parameters reflecting immune state, skin state, and topography to the difference between biologic and chronologic age. Facial skin topography, skin moisture, sebum level, and skin elasticity were studied using commercial devices. Blood immunology studies were performed using venous blood samples. Correlations between all measured parameters and age difference were calculated. Also, cross correlations between skin cell profile and blood immune profile parameters, and skin roughness parameters were calculated.Results: Age dependencies of the blood immunological parameters on the biologic and chronologic age difference are less pronounced as compared to the changes in skin cell profile parameters. However, the changes in the tendencies when biologic age becomes equal to chronologic one are visible for all studied parameters.All measured skin roughness parameters show correlations with age difference, but average skin roughness and depth of the deepest profile valley have the largest correlation coefficient values. Many of the measured skin cell profile and blood immunology parameters show strong correlations with average skin roughness and deepest profile valley, with some of the coefficients exceeding 0.5–0.6.Conclusions: Basing on own experiments and published research results, it is possible to suggest using the difference between calculated biologic age and chronologic age as an individualized criterion supporting decisions on skin treatment strategy. Further research involving larger numbers of participants and aiming on optimizing the expressions for calculating biologic age could lead to reliable and easily available express criterion supporting the decision making for an individualized skin treatment.
|
|
| 4. |
|
|
| 5. |
- Surmeneva, Maria, et al.
(författare)
-
Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing
- 2015
-
Ingår i: IOP Conference Series. - IOP.
-
Konferensbidrag (refereegranskat)abstract
- This study is focused on the use of radio frequency magnetron sputtering to modify the surface of porous Ti6Al4V alloy fabricated via additive manufacturing technology. The hydroxyapatite (HA) coated porous Ti6Al4V alloy was studied in respect with its chemical and phase composition, surface morphology, water contact angle and hysteresis, and surface free energy. Thin nanocrystalline HA film was deposited while its structure with diamond-shaped cells remained unchanged. Hysteresis and water contact angle measurements revealed an effect of the deposited HA films, namely an increased water contact angle and contact angle hysteresis. The increase of the contact angle of the coating-substrate system compared to the uncoated substrate was attributed to the multiscale structure of the resulted surfaces.
|
|
| 6. |
- Vladescu, Alina, et al.
(författare)
-
Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Properties of the hydroxyapatite obtained by electrochemical assisted deposition (ED) are dependenton several factors including deposition temperature, electrolyte pH and concentrations, appliedpotential. All of these factors directly influence the morphology, stoichiometry, crystallinity,electrochemical behaviour, and particularly the coating thickness. Coating structure together withsurface micro- and nano-scale topography significantly influence early stages of the implant biointegration.The aim of this study is to analyse the effect of pH modification on the morphology,corrosion behaviour and in vitro bioactivity and in vivo biocompatibility of hydroxyapatite preparedby ED on the additively manufactured Ti64 samples. The coatings prepared in the electrolytes withpH = 6 have predominantly needle like morphology with the dimensions in the nanometric scale(~30 nm). Samples coated at pH = 6 demonstrated higher protection efficiency against the corrosiveattack as compared to the ones coated at pH = 5 (~93% against 89%). The in vitro bioactivity resultsindicated that both coatings have a greater capacity of biomineralization, compared to the uncoatedTi64. Somehow, the coating deposited at pH = 6 exhibited good corrosion behaviour and highbiomineralization ability. In vivo subcutaneous implantation of the coated samples into the white rats for up to 21 days with following histological studies showed no serious inflammatory process.
|
|
| 7. |
- Lund Ohlsson, Marie, et al.
(författare)
-
Estimation of muscular metabolic power in two different cross-country sit-skiing sledges using inverse-dynamics simulation
- 2022
-
Ingår i: Journal of Rehabilitation and Assistive Technologies Engineering. - : SAGE Publications. - 2055-6683 .- 2055-6683. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to estimate and compare the muscular metabolic power produced in the human body using musculoskeletal inverse-dynamics during cross-country sit-skiing. Two sitting positions were adapted for athletes with reduced trunk and hip muscle control, knee low with frontal trunk support (KL-fix), and knee high (KH). Five female national class able-bodied cross-country skiers performed submaximal and maximal exercise in both sitting positions, while recording 3-D kinematics, pole forces, electromyography and respiratory variables. Simulations were performed from these experimental results and muscular metabolic power was computed. The main part of the muscle metabolic power was produced in the upper limbs for both sitting positions, but KH produced more muscle metabolic power in lower limbs and trunk during maximal intensity. KH was also more efficient, utilizing less muscular metabolic power during submaximal intensities, relatively less power in the upper limbs and more power in the trunk, hip and lower limb muscles. This implies that sitting position KH is preferable for high power output when using able-bodied simulation models. This study showed the potential of using musculoskeletal simulations to improve the understanding of how different equipment design and muscles contribute to performance.
|
|
| 8. |
- Högberg, Cecilia, et al.
(författare)
-
Immunochemical faecal occult blood tests in primary care and the risk of delay in the diagnosis of colorectal cancer
- 2013
-
Ingår i: Scandinavian Journal of Primary Health Care. - : Informa UK Limited. - 0281-3432 .- 1502-7724. ; 31:4, s. 209-214
-
Tidskriftsartikel (refereegranskat)abstract
- Objective. To evaluate the value, risks, and shortcomings of immunochemical faecal occult blood tests (iFOBTs) in the diagnosis of colorectal cancer (CRC) and adenomas with high-grade dysplasia (HGD) in patients initially presenting to primary care. Design. A retrospective population-based study. Setting and subjects. All 495 cases of CRC and adenomas with HGD diagnosed in the county of Jamtland, Sweden from 2005 to 2009. Results. Of 495 patients 323 (65%) initially presented to primary care. IFOBTs were performed in 215 of 323 (67%) patients. The sensitivity of iFOBT for CRC and adenomas with HGD was 88% (83% when patients with a history of rectal bleeding were excluded). Of 34 patients with anaemia found en passant, 10 had negative iFOBTs. Time to diagnosis was longer for patients with negative iFOBTs (p < 0.0005). Conclusion. IFOBT might be helpful in selecting which patients to refer for colonoscopy. However, iFOBT has a limited sensitivity as a diagnostic test for CRC and adenomas with HGD. Relying only on iFOBT for colonoscopy referral could delay diagnosis, especially for patients with anaemia found en passant.
|
|
| 9. |
- Cronskär, Marie, et al.
(författare)
-
Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing
- 2015
-
Ingår i: Journal of mechanical design (1990). - : ASME Press. - 1050-0472 .- 1528-9001. ; 137:11
-
Tidskriftsartikel (refereegranskat)abstract
- There is a trend toward operative treatment for certain types of clavicle fractures and these are usually treated with plate osteosynthesis. The subcutaneous location of the clavicle makes the plate fit important, but the clavicle has a complex shape, which varies greatly between individuals and hence standard plates often have a poor fit. Using computed tomography (CT) based design, the plate contour and screw positioning can be optimized to the actual case. A method for patient-specific plating using design based on CT-data, additive manufacturing (AM), and postprocessing was initially evaluated through three case studies, and the plate fit on the reduced fracture was tested during surgery (then replaced by commercial plates). In all three cases, the plates had an adequate fit on the reduced fracture. The time span from CT scan of the fracture to final implant was two days. An approach to achieve functional design and screw-hole positioning was initiated. These initial trials of patient-specific clavicle plating using AM indicate the potential for a smoother plate with optimized screw positioning. Further, the approach facilitates the surgeon's work and operating time can be saved.
|
|
| 10. |
- Persson, Johan, et al.
(författare)
-
Stiffness and strength of cranioplastic implant systems in comparison to cranial bone
- 2018
-
Ingår i: Journal of Cranio-Maxillofacial Surgery. - : Elsevier BV. - 1010-5182 .- 1878-4119. ; 46:3, s. 418-423
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The aim of this study was to evaluate skull replacement options after decompressive craniectomy by systematically investigating which combination of geometrical properties and material selection would result in a mechanical response comparable in stiffness to that of native skull bone and a strength as high or higher than the same. Materials and methods: The study was conducted using a Finite Element Model of the top part of a human skull. Native skull bone, autografts and commercial implants made of PEEK, solid titanium, two titanium meshes and a titanium-ceramic composite were modeled under a set load to evaluate deformation and maximum stress. Results: The computational result showed a large variation of the strength and effective stiffness of the autografts and implants. The stiffness of native bone varied by a factor of 20 and the strength by a factor of eight. The implants span the entire span of the native skull, both in stiffness and strength. Conclusion: All the investigated implant materials had a potential for having the same effective stiffness as the native skull bone. All the materials also had the potential to be as strong as the native bone. To match inherent properties, the best choice of material and thickness is thus patient specific, depending on the quality of the patient's native bone.
|
|
