| 1. |
- Liu, Yanfeng, et al.
(författare)
-
In Situ Optical Spectroscopy Demonstrates the Effect of Solvent Additive in the Formation of All-Polymer Solar Cells
- 2022
-
Ingår i: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 13:50, s. 11696-11702
-
Tidskriftsartikel (refereegranskat)abstract
- 1-Chloronaphthalene (CN) has been a common solvent additive in both fullerene- A nd nonfullerene-based organic solar cells. In spite of this, its working mechanism is seldom investigated, in particular, during the drying process of bulk heterojunctions composed of a donor:acceptor mixture. In this work, the role of CN in all-polymer solar cells is investigated by in situ spectroscopies and ex situ characterization of blade-coated PBDB-T:PF5-Y5 blends. Our results suggest that the added CN promotes self-aggregation of polymer donor PBDB-T during the drying process of the blend film, resulting in enhanced crystallinity and hole mobility, which contribute to the increased fill factor and improved performance of PBDB-T:PF5-Y5 solar cells. Besides, the nonradiative energy loss of the corresponding device is also reduced by the addition of CN, corresponding to a slightly increased open-circuit voltage. Overall, our observations deepen our understanding of the drying dynamics, which may guide further development of all-polymer solar cells.
|
|
| 2. |
- Damas, Giane Benvinda, et al.
(författare)
-
Carbon dioxide reduction mechanism on Ru-based electrocatalysts [Ru(bpy)(2)(CO)(2)](2+) : insights from first-principles theory
- 2021
-
Ingår i: Sustainable Energy & Fuels. - : Royal Society of Chemistry. - 2398-4902. ; 5:23, s. 6066-6076
-
Tidskriftsartikel (refereegranskat)abstract
- Solar fuel production through the so-called artificial photosynthesis has attracted a great deal of attention to the development of a new world energy matrix that is renewable and environmentally friendly. This process is characterized by light absorption with enough photon energy to generate conduction electrons, which drive the carbon dioxide reduction to produce organic fuels. It is also common to couple Ru-complex electrocatalysts to form a more efficient and selective hybrid system for this application. In this work, we have undertaken a thorough investigation of the redox reaction mechanism of Ru-based electrocatalysts by means of density functional theory (DFT) methods under the experimental conditions that have been previously reported. More specifically, we have studied the electrochemistry and catalytic activity of the [Ru(bpy)(2)(CO)(2)](2+) coordination complex. Our theoretical assessment supports the following catalytic cycle: (i) [Ru(bpy)(2)(CO)(2)](2+) is transformed into [Ru(bpy)(2)(CO)](0) upon two-electron reduction and CO release; (ii) [Ru(bpy)(2)(CO)](0) is protonated to form the [Ru(bpy)(2)(CO)H](+) hydride complex; (iii) CO2 is activated by the hydride complex through an electrophilic addition to form the [Ru(bpy)(2)(CO)(OCHO)](+) intermediate; (iv) the resulting formic acid ligand is released in solution; and, finally, (v) the CO ligand is reattached to the complex to recover the initial [Ru(bpy)(2)(CO)(2)](2+) catalyst.
|
|
| 3. |
- Enghag, Margareta, 1952-, et al.
(författare)
-
Student evaluations of themselves as disciplinary practitioners
- 2009
-
Ingår i: Paper presented at the GIREP-EPEC (International Research Group on Physics Teaching) Conference, University of Leicester, Great Britain, 17-21 August.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 4. |
- Su, Wenyan, et al.
(författare)
-
Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:5, s. 6442-6449
-
Tidskriftsartikel (refereegranskat)abstract
- The ternary polymerization strategy of incorporating different donor and acceptor units forming terpolymers as photovoltaic materials has been proven advantageous in improving power conversion efficiencies (PCEs) of polymer solar cells (PSCs). Herein, a series of low band gap nonconjugated terpolymer acceptors based on two different fused-ring electron-deficient building blocks (IDIC16 and ITIC) with adjustable photoelectric properties were developed. As the third component, ITIC building blocks with a larger pi-conjugation structure, shorter solubilizing side chains, and red-shifted absorption spectrum were incorporated into an IDIC16-based nonconjugated copolymer acceptor PF1-TS4, which built up the terpolymers with two conjugated building blocks linked by flexible thioalkyl chain-thiophene segments. With the increasing ITIC content, terpolymers show gradually broadened absorption spectra and slightly down-shifted lowest unoccupied molecular orbital levels. The active layer based on terpolymer PF1-TS4-60 with a 60% ITIC unit presents more balanced hole and electron mobilities, higher photoluminescence quenching efficiency, and improved morphology compared to those based on PF1-TS4. In all-polymer solar cells (all-PSCs), PF1-TS4-60, matched with a wide band gap polymer donor PM6, achieved a similar open-circuit voltage (V-oc) of 0.99 V, a dramatically increased short-circuit current density (J(sc)) of 15.30 mA cm(-2), and fill factor (FF) of 61.4% compared to PF1-TS4 = 0.99 V, J(sc) = 11.21 mA cm(-2), and FF = 55.6%). As a result, the PF1-TS4-60-based all-PSCs achieved a PCE of 9.31%, which is similar to 50% higher than the PF1-TS4-based ones (6.17%). The results demonstrate a promising approach to develop high-performance nonconjugated terpolymer acceptors for efficient all-PSCs by means of ternary polymerization using two different A-D-A-structured fused-ring electron-deficient building blocks.
|
|
| 5. |
- George, Zandra, 1985, et al.
(författare)
-
Two-in-one : Cathode modification and improved solar cell blend stability through addition of modified fullerenes
- 2016
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 4:7, s. 2663-2669
-
Tidskriftsartikel (refereegranskat)abstract
- The synthesis of dual purpose modified fullerenes with pyridine-as well as amine-functional groups is reported. Addition of these fullerenes to a polymer : fullerene bulk-heterojunction blend based on a thiophene-quinoxaline donor polymer is found to modify the active layer/cathode interface of inverted solar cells (glass/ITO/active layer/MoO3/Al). In particular the open-circuit voltage of devices is increased from 0.1 V to about 0.7 V, which results in a drastic rise in photovoltaic performance with a power conversion efficiency of up to 3%. At the same time, presence of the functionalised fullerene additives prevents the detrimental formation of micrometre-sized fullerene crystals upon annealing at 140 degrees C. As a result, the device performance is retained, which promises significantly increased thermal stability of the bulk-heterojunction blend nanostructure.
|
|
| 6. |
- Nafari, Alexandra, 1980, et al.
(författare)
-
MEMS Sensor for in Situ TEM Atomic Force Microscopy
- 2008
-
Ingår i: Journal of microelectromechanical systems. - : IEEE Press. - 1057-7157 .- 1941-0158. ; 17:2, s. 328-333
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we present a MEMS atomic force microscope sensor for use inside a transmission electron microscope (TEM). This enables direct in situ TEM force measurements in the nanonewton range and thus mechanical characterization of nanosized structures. The main design challenges of the system and sensor are to reach a high sensitivity and to make a compact design that allows the sensor to be fitted in the narrow dimensions of the pole gap inside the TEM. In order to miniaturize the sensing device, an integrated detection with piezoresistive elements arranged in a full Wheatstone bridge was used. Fabrication of the sensor was done using standard micromachining techniques, such as ion implantation, oxide growth and deep reactive ion etch. We also present in situ TEM force measurements on nanotubes, which demonstrate the ability to measure spring constants of nanoscale systems.
|
|
| 7. |
- Liu, Yanfeng, et al.
(författare)
-
In Situ Optical Studies on Morphology Formation in Organic Photovoltaic Blends
- 2021
-
Ingår i: Small Methods. - : John Wiley & Sons. - 2366-9608. ; 5:10, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- The efficiency of bulk heterojunction (BHJ) based organic solar cells is highly dependent on the morphology of the blend film, which is a result of a fine interplay between donor, acceptor, and solvent during the film drying. In this work, a versatile set-up of in situ spectroscopies is used to follow the morphology evolution during blade coating of three iconic BHJ systems, including polymer:fullerene, polymer:nonfullerene small molecule, and polymer:polymer. the drying and photoluminescence quenching dynamics are systematically study during the film formation of both pristine and BHJ films, which indicate that the component with higher molecular weight dominates the blend film formation and the final morphology. Furthermore, Time-resolved photoluminescence, which is employed for the first time as an in situ method for such drying studies, allows to quantitatively determine the extent of dynamic and static quenching, as well as the relative change of quantum yield during film formation. This work contributes to a fundamental understanding of microstructure formation during the processing of different blend films. The presented setup is considered to be an important tool for the future development of blend inks for solution-cast organic or hybrid electronics.
|
|
| 8. |
- Gregorcic, Bor, 1988-, et al.
(författare)
-
Conceptual Blending as an Interpretive Lens for Student Engagement with Technology : Exploring Celestial Motion on an Interactive Whiteboard
- 2021
-
Ingår i: Research in science education. - : Springer. - 0157-244X .- 1573-1898. ; 51:2, s. 235-275
-
Tidskriftsartikel (refereegranskat)abstract
- We present and analyze video data of upper secondary school students’ engagement with a computer-supported collaborative learning environment that enables them to explore astronomical phenomena (Keplerian motion). The students’ activities have an immersive and exploratory character, as students engage in open-ended inquiry and interact physically with the virtual environment displayed on an interactive whiteboard. The interplay of students’ playful exploration through physical engagement with the simulation environment, their attention to physics concepts and laws, and knowledge about the real planets orbiting the Sun presents an analytical challenge for the researcher and instructor encountering such complex learning environments. We argue that the framework of conceptual blending is particularly apt for dealing with the learning environment at hand, because it allows us to take into account the many diverse mental inputs that seem to shape the student activities described in the paper. We show how conceptual blending can be brought together with theoretical ideas concerned with embodied cognition and epistemology of physics, in order to provide researchers and instructors with a powerful lens for looking critically at immersive technology-supported learning environments.
|
|
| 9. |
- Fan, Qunping, 1989, et al.
(författare)
-
High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor
- 2021
-
Ingår i: Science in China Series B. - : Springer Nature. - 1674-7291 .- 1869-1870. ; 64, s. 1380-1388
-
Tidskriftsartikel (refereegranskat)abstract
- Anon-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells (all-PSCs), despite a low power conversion efficiency (PCE) caused by its narrow absorption spectra. Herein, a novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap of similar to 1.40 eV was developed, via polymerizing a large pi-fused small molecule acceptor (SMA) building block (namely YBO) with a non-conjugated thioalkyl linkage. Compared with its precursor YBO, PFY-2TS retains a similar low bandgap but a higher LUMO level. Moreover, compared with the structural analog of YBO-based fully conjugated polymer acceptor PFY-DTC, PFY-2TS shows similar absorption spectrum and electron mobility, but significantly different molecular crystallinity and aggregation properties, which results in optimal blend morphology with a polymer donor PBDB-T and better device physical processes in all-PSCs. As a result, PFY-2TS-based all-PSCs achieved a PCE of 12.31% with a small energy loss of 0.56 eV enabled by the reduced non-radiative energy loss (0.24 eV), which is better than that of 11.08% for the PFY-DTC-based ones. Our work clearly demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-PSCs.
|
|
| 10. |
- Fan, Qunping, 1989, et al.
(författare)
-
Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation
- 2020
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 13:12, s. 5017-5027
-
Tidskriftsartikel (refereegranskat)abstract
- Obtaining both high open-circuit voltage (V-oc) and short-circuit current density (J(sc)) has been a major challenge for efficient all-polymer solar cells (all-PSCs). Herein, we developed a polymer acceptor PF5-Y5 with excellent optical absorption capability (onset extending to similar to 880 nm and maximum absorption coefficient exceeding 105 cm(-1) in a film), high electron mobility (3.18 x 10(3) cm(2) V-1 s(-1)) and high LUMO level (-3.84 eV) to address such a challenge. As a result, the PBDB-T:PF5-Y5-based all-PSCs achieved a high power conversion efficiency of up to 14.45% with both a high Voc (0.946 V) and a high Jsc (20.65 mA cm(-2)), due to the high and broad absorption coverage, small energy loss (0.57 eV) and efficient charge separation and transport in the device, which are among the best values in the all-PSC field. In addition, the all-PSC shows a similar to 15% improvement in PCE compared to its counterpart small molecule acceptor (Y5)-based device. Our results suggest that PF5-Y5 is a very promising polymer acceptor candidate for applications in efficient all-PSCs.
|
|
