| 1. |
- Wang, Qinghua, et al.
(författare)
-
Smart Sewage Water Management and Data Forecast
- 2021
-
Ingår i: 33rd Workshop of the Swedish Artificial Intelligence Society, SAIS 2021. - USA : Institute of Electrical and Electronics Engineers (IEEE). - 9781665442367
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- There is currently an ongoing digital transformation for sewage and wastewater management. By automating data collection and enabling remote monitoring, we will not only be able to save abundant human resources but also enabling predictive maintenance which is based on big data analytics. This paper presents a smart sewage water management system which is currently under development in southern Sweden. Real-time data can be collected from over 500 sensors which have already been partially deployed. Preliminary data analysis shows that we can build statistical data models for ground water, rainfall, and sewage water flows, and use those models for data forecast and anomaly detection.
|
|
| 2. |
- Amoson, Jonas, 1973-
(författare)
-
Building complex GUIs in Plan 9
- 2009
-
Ingår i: Proceedings 4th International Workshop on Plan9. - Athens, GA : University of Georgia. ; , s. 15-21
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- How can non-trivial graphical user interfaces be designed in Plan 9 without them losing their minimalistic style? Different toolkits are discussed, and a proposal for a tabbed toolbar is suggested as a way to add functionality without cluttering the interface and avoiding the use of pop-up dialog boxes. A hypothetical port to the GUI in LyX is used as an example.
|
|
| 3. |
- Sodhro, Ali Hassan, 1986-, et al.
(författare)
-
Internet of medical things for independent living and re-learning
- 2021
-
Ingår i: GLOBAL HEALTH 2021 : The Tenth International Conference on Global Health Challenges At: Barcelona, Spain. - 9781612088921 ; , s. 1-5, s. 1-5
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This position paper gives better insight about the role and importance of Internet of Medical Things (IoMT) for independent living and re-learning for older adults. Sensing Technologies are the paradigm shift for transforming conventional healthcare practices into the smart, and self-assisted activities, which are envisioned for today's medical world. Internet of Things (IoT) and IoMT are the interrelated technologies for promoting independent living and re-learning practices. In this paper, re-learning is defined as the process for adults to recover useful instrumental activities of daily living skills that have been lost after an impairment.
|
|
| 4. |
- Faraon, Montathar, 1983-, et al.
(författare)
-
Social media affordances in net-based higher education
- 2011
-
Ingår i: Proceedings of the IADIS International Conference on International Higher Education (IHE 2011). - Shanghai, China : IADIS Press. - 9789728939564 ; , s. 11-37
-
Konferensbidrag (refereegranskat)abstract
- This paper explores the attitudes, conceptions and use of social media in net-based higher education. By using statistical and content analysis of data generated by two surveys directed to students (n = 109) and teachers (n = 77) involved in net-based higher education, we explore how social media influence the design of learning context in net-based higher education courses. By applying the affordance theory, we describe actual as well as preferred use of social media from an educational, social, and technical perspectives. The results showed that the potential use of social media have not yet been fully found in the context of net-based higher education. However, the perceived benefit of using social media differs in relation to educational topics. The potential use of social media in net-based higher education courses is discussed.
|
|
| 5. |
- Atxutegi, Eneko, et al.
(författare)
-
On the move with TCP in current and future mobile networks
- 2017
-
Ingår i: Proceedings of the 8th International Conference on the Network of the Future, London, United Kingdom, November 2017.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Mobile wireless networks constitute an indispensable part of the global Internet, and with TCP the dominating transport protocol on the Internet, it is vital that TCP works equally well over these networks as over wired ones. This paper identifies the performance dependencies by analyzing the responsiveness of TCP NewReno and TCP CUBIC when subject to bandwidth variations related to movements in different directions. The presented evaluation complements previous studies on 4G mobile networks in two important ways: It primarily focuses on the behavior of the TCP congestion control in medium- to high-velocity mobility scenarios, and it not only considers the current 4G mobile networks, but also low latency configurations that move towards the overall potential delays in 5G networks. The paper suggests that while both CUBIC and NewReno give similar goodput in scenarios where the radio channel continuously degrades, CUBIC gives a significantly better goodput in scenarios where the radio channel quality continuously increases. This is due to CUBIC probing more aggressively for additional bandwidth. Important for the design of 5G networks, the obtained results also demonstrate that very low latencies are capable of equalizing the goodput performance of different congestion control algorithms. Only in low latency scenarios that combine both large fluctuations of available bandwidths and a mobility pattern in which the radio channel quality continuously increases can some performance differences be noticed.
|
|
| 6. |
- Svensson, Bo, 1959-, et al.
(författare)
-
Improving Performance in Flexible Manufacturing by a P-sop Approach
- 2014
-
Ingår i: Proceedings of the 6th International Swedish Production Symposium 2014. - 9789198097412 ; , s. 1-8
-
Konferensbidrag (refereegranskat)abstract
- This paper present a Part oriented Sequence of Operation (P-SOP) approach that address flexibility, robustness and deployment in manufacturing cells up to plant level. A P-SOP description language has been formulated where the control strategy based on actual circumstances easily can be defined. Furthermore, a P-SOP multi-agent generator has been created that compiles the strategy description to multi-agents that control the manufacturing. Deadlock free IEC 61131-3 PLC code are directly generated from the description language. The code is not optimised for a specific scenario since the general description contains all possible routing paths and all resources available.
|
|
| 7. |
- Einarson, Daniel, 1960-, et al.
(författare)
-
Smart home techniques for young people with functional disabilities
- 2020
-
Ingår i: ACHI 2020. - 9781612087610 ; , s. 294-300
-
Konferensbidrag (refereegranskat)abstract
- A purpose behind the United Nation’s Agenda 2030is that no one shall be left behind, which implies that supportfor vulnerable people shall be seen as clearly significant. Inthat context, assistive technologies serve purposes of improvingdisabled individuals’ inclusiveness and overall well-being. Thiscontribution covers ongoing experiments on techniquesdeveloped for Smart Homes, where the outcomes of suchdevelopments are targeted towards young people withfunctional disabilities, in order to provide them withindependence in their own living space.
|
|
| 8. |
- Cappelen, Birgitta, 1962-, et al.
(författare)
-
Design for co-creation with interactive montage
- 2011
-
Ingår i: Proceedings, 4th Nordic Design Research Conference, Nordes2011, School of Art and Design, Aalto University, Helsinki, Finland
May 29th - June 1st, 2011.
-
Konferensbidrag (refereegranskat)abstract
- Montage in cinema means to mount images andsounds from different sources, that are interpreted together and whose oppositions drive the storyfurther. In this paper we develop the montage concept further for co-creation in interactive, tactile, spatial cross-media. As case we use the design of the interactive, tangible, cross-media installation ORFI. ORFI is developed to facilitate collaboration and co-creation between children with severe disabilities and their care persons. In this paper we focus on how we have designed for interactive montage. We present two main types of interactive montage, close and shifted in three dimensions (spatial, temporal and actorial). With the first we mean spatial and temporal closeness, depending on the roles users take and the interpretations they make. With shifted we mean how to use spatial and temporal shifting and distance between the media elements in space and over time, depending on the users’ roles and interpretations. All this to encourage co-creation over time, between a variety of users in different situations.
|
|
| 9. |
- Gustavsson Christiernin, Linn, 1979-
(författare)
-
How to describe interaction with a collaborative robot
- 2017
-
Ingår i: HRI '17 Proceedings of the Companion of the 2017 ACM/IEEE International Conference on Human-Robot Interaction. - New York, NY, USA : ACM. - 9781450348850 ; , s. 93-94
-
Konferensbidrag (refereegranskat)abstract
- In this paper, we describe early work on a classification model on how to interact with industrial and other types of robots. We suggest a classification for how to describe different scenarios within Human-Robot Interaction. The idea with this model is to help when identifying the gap between where a company is and where they would like to be when it comes to collaborative automation. © 2017 Author.
|
|
| 10. |
|
|
