| 1. |
- Salas Romero, Silvia
(författare)
-
Multidisciplinary Near-Surface Investigation of a Quick-Clay Landslide Prone Area in Southwest Sweden
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Quick-clay landslides are considered one of the most important geohazards in Sweden, Norway, and Canada. The deposits involved are glacial and postglacial clays and silty clays, which are very sensitive to increased stress that may collapse their structure and cause liquefaction.A multidisciplinary approach was adopted in this study of quick clays in an area of southwest Sweden that is prone to landslides. It was mainly based on geophysical methods, but was complemented and validated with geotechnical, geological, and hydrological data. Downhole geophysics, land and river reflection seismics, radio magnetotellurics, P-wave refraction tomography, magnetics, and multichannel analysis of surface waves comprised the main geophysical methods used in this research. Laboratory measurements of core samples, such as grain size analysis, mineral magnetic properties, fossil content, X-ray fluorescence, cation exchange capacity, X-ray powder diffraction, electrical conductivity, and pH were also taken. Hydrological modelling was used to obtain information on the properties of groundwater within a coarse-grained layer, given the importance of this information in the formation of quick clays.The evaluation of the physico-chemical properties of the coarse-grained layer revealed high values of magnetic susceptibility, probably as a result of fluvial sorting, which tends to accumulate denser minerals such as magnetite. Potential quick clays were visually observed above this layer, and their presence was also confirmed by geotechnical data acquired in previous studies. Marine fossils identified within the coarse-grained layer confirmed the glaciomarine origin of the clays. Geophysical results revealed the presence of large-scale structures, an undulating fractured bedrock and a coarse-grained layer sandwiched between clay deposits, with leached sediments on top and unleached sediments below. This layer, important for the development of quick clays in the area, was 3D modelled in a regional context. Magnetic data also revealed that the coarse-grained layer together with quick clays, have the potential to act as a sliding prone layer. Multichannel analysis of surface waves helped to geotechnically characterize the area. Although the results could not reach the deeper layers, it did yield information about the shallower layers of clay, silt and sand. The VS30 values indicated the presence of soft soils, as well as soft clays/silts with high plasticity index and high water content.This PhD is expected to improve the current knowledge of quick-clay landslides and how they are preconditioned. Climate change will probably affect the study area in the near future, most likely increasing landslide risk, therefore, research should continue and advance to new levels. Application of other geophysical methods such as borehole or geophysical monitoring, and induced polarization, could provide more information about the formation of quick clays and associated landslides.
|
|
| 2. |
- Sopher, Daniel
(författare)
-
Characterization of the structure, stratigraphy and CO2 storage potential of the Swedish sector of the Baltic and Hanö Bay basins using seismic reflection methods
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- An extensive multi-channel seismic dataset acquired between 1970 and 1990 by Oljeprospektering AB (OPAB) has recently been made available by the Geological Survey of Sweden (SGU). This thesis summarizes four papers, which utilize this largely unpublished dataset to improve our understanding of the geology and CO2 storage capacity of the Baltic and Hanö Bay basins in southern Sweden.A range of new processing workflows were developed, which typically provide an improvement in the final stacked seismic image, when compared to the result obtained with the original processing. A method was developed to convert scanned images of seismic sections into SEGY files, which allows large amounts of the OPAB dataset to be imported and interpreted using modern software. A new method for joint imaging of multiples and primaries was developed, which is shown to provide an improvement in signal to noise for some of the seismic lines within the OPAB dataset. For the first time, five interpreted regional seismic profiles detailing the entire sedimentary sequence within these basins, are presented. Depth structure maps detailing the Outer Hanö Bay area and the deeper parts of the Baltic Basin were also generated. Although the overall structure and stratigraphy of the basins inferred from the reprocessed OPAB dataset are consistent with previous studies, some new observations have been made, which improve the understanding of the tectonic history of these basins and provide insight into how the depositional environments have changed throughout time. The effective CO2 storage potential within structural and stratigraphic traps is assessed for the Cambrian Viklau, När and Faludden sandstone reservoirs. A probabilistic methodology is utilized, which allows a robust assessment of the storage capacity as well as the associated uncertainty. The most favourable storage option in the Swedish sector of the Baltic Basin is assessed to be the Faludden stratigraphic trap, which is estimated to have a mid case (P50) storage capacity of 3390 Mt in the deeper part of the basin, where CO2 can be stored in a supercritical phase.
|
|
| 3. |
- Cheraghi, Saeid, et al.
(författare)
-
Crustal-scale reflection seismic investigations in the Bathurst Mining Camp, New Brunswick, Canada
- 2011
-
Ingår i: Tectonophysics. - : Elsevier BV. - 0040-1951 .- 1879-3266. ; 506:1-4, s. 55-72
-
Tidskriftsartikel (refereegranskat)abstract
- The Bathurst Mining Camp, northern New Brunswick, Canada contains the super giant Brunswick No. 12 massive sulphide deposit and the smaller, now abandoned, Brunswick No. 6 deposit. Discoveries of additional base metal deposits in the camp require a better understanding of geological structures at depth. To this end, reflection seismic data in the Brunswick No. 6 area were acquired along three 2D profiles in 1999, with a total length of about 30 km. We have recovered, processed and interpreted these seismic data in conjunction with petrophysical and geological data from the study area. The seismic data and the borehole geophysical data allow a better understanding of both the shallow and deep structures (to 9 km depth) in the area. The seismic data show steeply dipping structures of the Brunswick No. 6 area, many of which reach the surface and allow for correlation with the surface and borehole geological information. Finite-difference modeling of major geological formations constrained with borehole petrophysical measurements indicates good correlation between the observed seismic and the synthetic data. A sequence of seismically reflective and transparent zones indicates a thrust stack in the Brunswick No. 6 area. The contact between the reflective and transparent zones is a series of faults bringing the two units over each other. A reflective package is observed in all three profiles and correlates well with the Brunswick horizon, the key mineralized zone in the study area. The Brunswick horizon extends down to depth greater than 3 km, increasing the hope for discovery of deeper base metal deposits. Two other sets of reflections are also observed in all three profiles in the depth range of about 5-8 km. We interpret them as two sets of thrusted sheets, which could be an indication that the Brunswick belt extends down to a maximum depth of 8 km.
|
|
| 4. |
- Dehghannejad, Mahdieh, et al.
(författare)
-
Reflection seismic imaging of the upper crust in the Kristineberg mining area, northern Sweden
- 2010
-
Ingår i: Journal of Applied Geophysics. - : Elsevier BV. - 0926-9851 .- 1879-1859. ; 71:4, s. 125-136
-
Tidskriftsartikel (refereegranskat)abstract
- The Kristineberg mining area is located in the western part of the Palaeoproterozoic Skellefte Ore District, one of the most important mining districts in Europe. As a part of a 3D geologic modeling project, two new reflection seismic profiles were acquired with a total length of about 20 km. One profile (HR), parallel to previous seismic profiles, was acquired using a 10 m receiver and source interval and crosses the steeply dipping structures of the Kristineberg mine. The other profile (Profile 2) runs perpendicular to all existing profiles in the area. Although the structural geology is complex, the processed seismic data reveal a series of steeply dipping to sub-horizontal reflections, some of which reach the surface and allow correlation with surface geology. Our general interpretation of the seismic images is that the Kristineberg mine and associated mineral horizon are located in the northern part of a series of steeply south dipping structures. Overall, main structures plunge to the west at about 30 degrees-40 degrees. Cross-dip analysis and reflection modeling were carried out to obtain the 3D orientation of the main reflections and to provide insight into the possible contribution of out-of-the-plane reflections. This helped, for example, to obtain the 3D geometry of a deep reflection that was previously interpreted as structural basement to volcanic rocks. The new reflection seismic profiles have improved our understanding of shallow geological structures in the area and in conjunction with recently acquired potential field data, magnetotelluric data and geological observations will help to refine previous 3D geologic modeling interpretations that were aimed at larger scale structures.
|
|
| 5. |
- Hübert, Juliane, et al.
(författare)
-
MT measurements in the western part of the Paleoproterozoic Skellefte Ore District, Northern Sweden : a contribution to an integrated geophysical study
- 2009
-
Ingår i: Tectonophysics. - : Elsevier. - 0040-1951 .- 1879-3266. ; 475:3-4, s. 493-502
-
Tidskriftsartikel (refereegranskat)abstract
- A 2D conductivity model of the Kristineberg area in the Skellefte Ore District, Northern Sweden, has been derived from new magnetotelluric measurements. This complements an intensive geophysical and geological study of the area, including reflection seismics, gravity and aeromagnetic data modeling as well as geological field observations. In a pilot study, 20 broadband MT stations were installed in May 2007 along a 20 km long north–south profile. Dimensionality analysis shows that a 2D interpretation of the data is justified, although the presumed geoelectric strike direction of N75°E is not consistent over the whole profile. The new conductivity model of the upper crust agrees well with the results from the seismic studies. Interpreting both independent data sets confirms the major features from the previous model, such as the thickness of the Revsund granites in the south, the existence of a structural basement with metasedimentary origin, and gives new insight into the nature of the volcanic rocks and their possible mineral content.
|
|
| 6. |
- Malehmir, Alireza, et al.
(författare)
-
Regional structural profiles in the western part of the Palaeoproterozoic Skellefte Ore District, northern Sweden
- 2007
-
Ingår i: Precambrian Research. - : Elsevier BV. - 0301-9268 .- 1872-7433. ; 159:1-2, s. 1-18
-
Tidskriftsartikel (refereegranskat)abstract
- The Kristineberg mining area is situated in the western part of the Palaeoproterozoic Skellefte Ore District, northern Sweden, and is well known for its VHMS base-metal and gold deposits. This paper presents five upper crustal geological cross sections that have been constructed and mainly constrained by seismic reflection data, potential field modeling as well as geological field observations. These profiles are visualized in 3D to highlight the three dimensionality and internal consistency of structures across the region. The resulting structural model for the Skellefte volcanics and overlying metasediments comprises two thrust-sheets that expose the Skellefte volcanics in the cores of hanging-wall anticlinal structures. A shear-zone is imaged as a band of seismic reflectivity terminated by the southern Revsund granite unit. Another shear-zone, possibly a continuation of the Skellefte Shear Zone (SSZ) runs through the centre of the region and accounts for some of the structural complexity and shearing observed between the two anticlinal exposures of the volcanics. Additional smaller scale shear-zones have been identified from geological and geophysical mapping within the main structural blocks of the Skellefte volcanics. The Mala volcanic rocks in the north are separated from the Skellefte volcanics by a fault that cuts discordant to the strike of the Mala volcanics. A structural basement has been proposed to the Skellefte volcanics, constrained by seismic reflection data. Exposures of Bothnian Basin rocks south of the Revsund granite outcrops, suggest that the domain beneath the north dipping reflectivity is associated with Bothnian Basin stratigraphy. The preferred interpretation for the contact between the Skellefte volcanics and the Bothnian Basin rocks is a thrust fault that brings the felsic volcanic rocks over the metasedimentary domain. The Revsund granites are divided into two major groups based on their present day thickness and shapes. Although parts of the Viterliden intrusion are almost undeformed, it is cut by a series of shear-zones, causing the magnetic lineations seen within these rocks. The structural profiles presented demonstrate that the Kristineberg ore is situated in the northern limb of a local synformal structure. The new crustal-scale structural model demonstrates the potential of integrating geophysical and geological data when modelling structures hosting mineralization in a complex region like the Skellefte District. The structural profiles presented in this paper, have greatly improved our understanding of the 3D tectonostratigraphy and architecture of the poly-deformed ca. 1.9 Ga the Skellefte Ore District.
|
|
| 7. |
- Tryggvason, Ari, et al.
(författare)
-
Reflection seismic investigations in the western part of the paleoproterozoic VHMS-bearing Skellefte district, northern Sweden
- 2006
-
Ingår i: Economic geology and the bulletin of the Society of Economic Geologists. - : Society of Economic Geologists. - 0361-0128 .- 1554-0774. ; 101:5, s. 1039-1054
-
Tidskriftsartikel (refereegranskat)abstract
- The Skellefte district forms part of the Svecofennian ca. 1.90 to 1.80 Ga, snpracrustal sequence and associated intrusive rocks in the northern part of Sweden. The western part of the Skellefte district, which is the most important metallogenic province in northern Sweden today, hosts major volcanic-hosted massive Sulfide (VHMS) deposits (e.g., the 23 million metric tons (Mt) Kristineberg Cu-Zn-Pb-Ag-Au deposit). In order to obtain a better understanding of the VHMS ore potential at depth, new seismic reflection data were acquired along two parallel and 25-km-long profiles in the Kristineberg area in 2003. The data were collected with the purpose of obtaining high-resolution images of the top 10 kin of the crust and are presented here for the first time. Although the structural setting is very complex, the stacked sections reveal numerous reflections that can be correlated with surface geology. Visible on both profiles is a pronounced north-dipping hand of reflections marking a boundary between relatively transparent crust above and significantly more reflective crust beneath it. We interpret this reflective crust to represent a structural basement to the ore-bearing Skellefte Group, possibly constituting Bothnian basin metasedimentary rocks bordering the Skellefte district to the south. This new interpretation is important for the understanding of the tectonic evolution of the Skellefte district and for defining exploration strategies in the area. The seismic results suggest that the Kristineberg and Ravliden deposits occur on the northern limb of a kilometer-scale local second-order syncline within the hinge zone of a major antiform. Results from a profile located approximately 8 kin to the west of the Kristineberg mine indicate that the Revsund granitoid has a thickness of about 3 to 3.5 km. Ultramafic rocks are also imaged clearly Diffraction patterns and bright-spot reflectivity is interpreted as originating from either mafic to ultramafic intrusions ora mineralization zone at 3- to 5-km depth. These results help to identify new prospective areas and mineral potential, both downplunge from known ores and on the same stratigraphic horizon on the southern limb of the ore-bearing syncline. The seismic reflection profiling has been effective in imaging the major structures around the Kristineberg orebody, demonstrating that this technique can be used for delineating complex structures significant for mineral exploration.
|
|
| 8. |
- Place, Joachim, et al.
(författare)
-
On using the thin fluid-layer approach at ultrasonic frequencies for characterising grout propagation in an artificial fracture
- 2016
-
Ingår i: International Journal of Rock Mechanics And Mining Sciences. - : Elsevier. - 1365-1609 .- 1873-4545. ; 89, s. 68-74
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate the ultrasonic transport properties of such an idealised fracture whose 100 µm aperture is about 0.02 the wavelength, and filled with various fluids flowing under external forcing. As the artificial fracture is made of two solid and parallel walls separated by a thin fluid layer, we use the thin fluid layer concept to study the compressional (P-) wavefield transmitted across and reflected off the fracture, with no mode-conversion considered. We demonstrate that air and various fluids (water, grouts of varied w/c – water to cement ratio) can be distinguished when injected into the fracture, both at atmospheric pressure or under over-pressure as done in real grouting cases in the field. Then, using an analytical solution, we verify our experimental data and predict the results that can be obtained with a different fracture aperture. Our results illustrate that replicating such ultrasonic measurements both in space and time would allow successfully monitoring the grout propagation within an artificial fracture.
|
|
| 9. |
- Andersson, Magnus, et al.
(författare)
-
Carbonatite ring-complexes explained by caldera-style volcanism
- 2013
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Carbonatites are rare, carbonate-rich magmatic rocks that make up a minute portion of the crust only, yet they are of great relevance for our understanding of crustal and mantle processes. Although they occur in all continents and from Archaean to present, the deeper plumbing system of carbonatite ring-complexes is usually poorly constrained. Here, we show that carbonatite ring-complexes can be explained by caldera-style volcanism. Our geophysical investigation of the Alnö carbonatite ring-complex in central Sweden identifies a solidified saucer-shaped magma chamber at ∼3 km depth that links to surface exposures through a ring fault system. Caldera subsidence during final stages of activity caused carbonatite eruptions north of the main complex, providing the crucial element to connect plutonic and eruptive features of carbonatite magmatism. The way carbonatite magmas are stored, transported and erupt at the surface is thus comparable to known emplacement styles from silicic calderas.
|
|
| 10. |
- Bastani, Mehrdad, et al.
(författare)
-
Delineating hydrothermal stockwork copper deposits using controlled-source and radio-magnetotelluric methods : A case study from northeast Iran
- 2009
-
Ingår i: Geophysics. - : Society of Exploration Geophysicists. - 0016-8033 .- 1942-2156. ; 74:5, s. B167--B181
-
Tidskriftsartikel (refereegranskat)abstract
- Radio- and controlled-source-tensor magnetotelluric (RMT and CSTMT) methods are used to target hydrothermal veins of copper mineralization. The data were acquired along six eastwest- and three north-south-trending profiles, covering an area of about 500 x 400 m(2). The tensor RMT data were collected in the 10-250-kHz frequency band. A double horizontal magnetic dipole transmitter in the 4-12.5-kHz frequency range allowed us to constrain the deeper parts of the resistivity models better. To obtain optimum field parameters, ground magnetic profiling was conducted prior to the RMT and CSTMT surveys. Although the study area (in Iran) is remote, a number of radio transmitters with acceptable signal-to-noise ratio were utilized. The 2D inversion of RMT data led to unstable resistivity models with large data misfits. Thus, the RMT data were used to complement and analyze the near-surface resistivity anomalies observed in the 2D CSTMT models. Analyses of strike and dimensionality from the CSTMT data suggests that the low-resistivity structures are mainly three dimensional; therefore, 2D inversion of determinant data is chosen. Independent 2D inversion models of the determinant CSTMT data along crossing profiles are in good agreement. Known copper mineralization is imaged well in the CSTMT models. The thinning of the conductive overburden correlates very well with magnetic highs, indicating the bedrock is resistive and magnetic. In this sense, the magnetic and electromagnetic fields complement each other. Analysis of the 2D resistivity models indicates the volcanic rock deepens at the center of the study area. This zone is associated with a magnetic low and therefore is recommended for detailed exploration work.
|
|
