| 1. |
- Björn, Niclas, et al.
(author)
-
Genes and variants in hematopoiesis-related pathways are associated with gemcitabine/carboplatin-induced thrombocytopenia
- 2020
-
In: The Pharmacogenomics Journal. - : Nature Publishing Group. - 1470-269X .- 1473-1150. ; 20:2, s. 179-191
-
Journal article (peer-reviewed)abstract
- Chemotherapy-induced myelosuppression, including thrombocytopenia, is a recurrent problem during cancer treatments that may require dose alterations or cessations that could affect the antitumor effect of the treatment. To identify genetic markers associated with treatment-induced thrombocytopenia, we whole-exome sequenced 215 non-small cell lung cancer patients homogeneously treated with gemcitabine/carboplatin. The decrease in platelets (defined as nadir/baseline) was used to assess treatment-induced thrombocytopenia. Association between germline genetic variants and thrombocytopenia was analyzed at single-nucleotide variant (SNV) (based on the optimal false discovery rate, the severity of predicted consequence, and effect), gene, and pathway levels. These analyses identified 130 SNVs/INDELs and 25 genes associated with thrombocytopenia (P-value < 0.002). Twenty-three SNVs were validated in an independent genome-wide association study (GWAS). The top associations include rs34491125 in JMJD1C (P-value = 9.07 × 10−5), the validated variants rs10491684 in DOCK8 (P-value = 1.95 × 10−4), rs6118 in SERPINA5 (P-value = 5.83 × 10−4), and rs5877 in SERPINC1 (P-value = 1.07 × 10−3), and the genes CAPZA2 (P-value = 4.03 × 10−4) and SERPINC1 (P-value = 1.55 × 10−3). The SNVs in the top-scoring pathway “Factors involved in megakaryocyte development and platelet production” (P-value = 3.34 × 10−4) were used to construct weighted genetic risk score (wGRS) and logistic regression models that predict thrombocytopenia. The wGRS predict which patients are at high or low toxicity risk levels, for CTCAE (odds ratio (OR) = 22.35, P-value = 1.55 × 10−8), and decrease (OR = 66.82, P-value = 5.92 × 10−9). The logistic regression models predict CTCAE grades 3–4 (receiver operator characteristics (ROC) area under the curve (AUC) = 0.79), and large decrease (ROC AUC = 0.86). We identified and validated genetic variations within hematopoiesis-related pathways that provide a solid foundation for future studies using genetic markers for predicting chemotherapy-induced thrombocytopenia and personalizing treatments.
|
|
| 2. |
- Gustafsson, Marcus, 1987-, et al.
(author)
-
Climate performance of liquefied biomethane with carbon dioxide utilization or storage
- 2024
-
In: Renewable and sustainable energy reviews. - : Elsevier. - 1364-0321 .- 1879-0690. ; 192
-
Journal article (peer-reviewed)abstract
- In the process of upgrading biogas to biomethane for gas grid injection or use as a vehicle fuel, biogenic carbon dioxide (CO₂) is separated and normally emitted to the atmosphere. Meanwhile, there are a number of ways of utilizing CO₂ to reduce the dependency on fossil carbon sources. This article assesses the climate performance of liquefied biomethane for road transport with different options for utilization or storage of CO₂. The analysis is done from a life cycle perspective, covering the required and avoided processes from biogas production to the end use of biomethane and CO₂. The results show that all of the studied options for CO₂ utilization can improve the climate performance of biomethane, in some cases contributing to negative CO₂ emissions. One of the best options, from a climate impact perspective, is to use the CO₂ internally to produce more methane, although continuous supply of hydrogen from renewable sources can be a challenge. Another option that stands out is concrete curing, where CO₂ can both replace conventional steam curing and be stored for a long time in mineral form. Storing CO₂ in geological formations can also lead to negative CO₂ emissions. However, with such long-term storage solutions, opportunities to recycle biogenic CO₂ are lost, together with the possibility of de-fossilizing processes that require carbon, such as chemical production and horticulture.
|
|
| 3. |
-
Bioreactors : design, operation and novel applications
- 2016
-
Editorial collection (other academic/artistic)abstract
- In this expert handbook both the topics and contributors are selected so as to provide an authoritative view of possible applications for this new technology. The result is an up-to-date survey of current challenges and opportunities in the design and operation of bioreactors for high-value products in the biomedical and chemical industries.Combining theory and practice, the authors explain such leading-edge technologies as single-use bioreactors, bioreactor simulators, and soft sensor monitoring, and discuss novel applications, such as stem cell production, process development, and multi-product reactors, using case studies from academia as well as from industry. A final section addresses the latest trends, including culture media design and systems biotechnology, which are expected to have an increasing impact on bioreactor design.With its focus on cutting-edge technologies and discussions of future developments, this handbook will remain an invaluable reference for many years to come.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Walladbegi, Java, et al.
(author)
-
Three-dimensional bioprinting using a coaxial needle with viscous inks in bone tissue engineering - An in vitro study
- 2020
-
In: Annals of Maxillofacial Surgery. - : Medknow. - 2249-3816 .- 2231-0746. ; 10:2, s. 370-376
-
Journal article (peer-reviewed)abstract
- Introduction: Vascularized autologous tissue grafts are considered 'gold standard' for the management of larger bony defects in the craniomaxillofacial area. This modality does however carry limitations, such as the absolute requirement for healthy donor tissues and recipient vessels. In addition, the significant morbidity of large bone graft is deterrent to fibula bone flap use. Therefore, less morbid strategies would be beneficial. The purpose of this study was to develop a printing method to manufacture scaffold structure with viable stem cells. Materials and Methods: In total, three different combinations of ground beta tri-calcium phosphate and CELLINK (bioinks) were printed with a nozzle to identify a suitable bioink for three-dimensional printing. Subsequently, a coaxial needle, with three different nozzle gauge combinations, was evaluated for printing of the bioinks. Scaffold structures (grids) were then printed alone and with additional adipose stem cells before being transferred into an active medium and incubated overnight. Following incubation, grid stability was evaluated by assessing the degree of maintained grid outline, and cell viability was determined using the live/dead cell assay. Results: Among the three evaluated combinations of bioinks, two resulted in good printability for bioprinting. Adequate printing was obtained with two out of the three nozzle gauge combinations tested. However, due to the smaller total opening, one combination revealed a better stability. Intact grids with maintained stability were obtained using Ink B23 and Ink B42, and approximately 80% of the printed stem cells were viable following 24 hours. Discussion: Using a coaxial needle enables printing of a stable scaffold with viable stem cells. Furthermore, cell viability is maintained after the bioprinting process.
|
|
| 8. |
- Cardemil, Carina, et al.
(author)
-
Strontium-doped calcium phosphate and hydroxyapatite granules promote different inflammatory and bone remodelling responses in normal and ovariectomised rats.
- 2013
-
In: PLosOne. - : Public Library of Science (PLoS). - 1932-6203. ; 8:12
-
Journal article (peer-reviewed)abstract
- The healing of bone defects may be hindered by systemic conditions such as osteoporosis. Calcium phosphates, with or without ion substitutions, may provide advantages for bone augmentation. However, the mechanism of bone formation with these materials is unclear. The aim of this study was to evaluate the healing process in bone defects implanted with hydroxyapatite (HA) or strontium-doped calcium phosphate (SCP) granules, in non-ovariectomised (non-OVX) and ovariectomised (OVX) rats. After 0 (baseline), six and 28d, bone samples were harvested for gene expression analysis, histology and histomorphometry. Tumour necrosis factor-α (TNF-α), at six days, was higher in the HA, in non-OVX and OVX, whereas interleukin-6 (IL-6), at six and 28d, was higher in SCP, but only in non-OVX. Both materials produced a similar expression of the receptor activator of nuclear factor kappa-B ligand (RANKL). Higher expression of osteoclastic markers, calcitonin receptor (CR) and cathepsin K (CatK), were detected in the HA group, irrespective of non-OVX or OVX. The overall bone formation was comparable between HA and SCP, but with topological differences. The bone area was higher in the defect centre of the HA group, mainly in the OVX, and in the defect periphery of the SCP group, in both non-OVX and OVX. It is concluded that HA and SCP granules result in comparable bone formation in trabecular bone defects. As judged by gene expression and histological analyses, the two materials induced different inflammatory and bone remodelling responses. The modulatory effects are associated with differences in the spatial distribution of the newly formed bone.
|
|
| 9. |
- Björk, Per, 1978-
(author)
-
Biological Sensing and DNA Templated Electronics Using Conjugated Polymers
- 2007
-
Doctoral thesis (other academic/artistic)abstract
- Conjugated polymers have been found useful in a wide range of applications such as solar cells, sensor elements and printed electronics, due to their optical and electronic properties. Functionalization with charged side chains has enabled water solubility, resulting in an enhanced interaction with biomolecules. This thesis focus on the emerging research fields, where these conjugated polyelectrolytes (CPEs) are combined with biomolecules for biological sensing and DNA nanowire assembling.CPEs have shown large potential in biomolecular detection where the optical read out is due to the geometrical alternation in the backbone and aggregation state. This thesis focused on transferring the biomolecular detection to a surface of CPEs. The characterization of the CPE layer show that a hydrogel can be formed, and how the layer can undergo geometrical changes upon external stimulus such as pH change. A selective sensor surface can be created by imprinting ssDNA or an antibody in the CPE layer. The discrimination for complementary DNA hybridization and specific antibody interaction can be monitored by surface plasmon resonance or quartz crystal microbalance. We have also taken the step out from the controlled test tube experiments to the complex environment of the cell showing the potential for staining of compartments and structures in live and fixed cell. Depending on the conditions and CPE used, cell nuclei, acidic vesicles and cytoskeleton structure can be visualized. Furthermore, the live staining shows no sign of toxic effect on cultured fibroblasts.CPEs can also be a valuable element when assembling electronics in the true nano regime. I have used DNA as building template due to its attractive size features, with a width of around 2 nm and a length scale in the µm regime, and the inbuilt base-paring recognition elements. This thesis shows how DNA can be decorated with CPEs and stretched on surfaces into a model for aligned semiconducting nanowire geometries. Not only making the template structures is of importance, but also how to place them on the correct surface position, i.e. on electrodes. Strategies for positioning DNA nanowires using transfer printing and surface energy patterning methods have therefore been developed in the thesis. The stretched DNA decorated with CPE also offers a way to further study the molecular binding interaction between the two molecules. Single molecular spectroscopy in combination with polarization has given information of the variation of the CPE binding along a DNA chain.
|
|
| 10. |
- Höst, Gunnar, 1976-
(author)
-
Engineering carbonic anhydrase for highly selective ester hydrolysis
- 2007
-
Doctoral thesis (other academic/artistic)abstract
- I denna avhandling presenteras arbete utfört med enzymet humant karboanhydras II (HCAII). Enzymer är en typ av proteiner som accelererar (katalyserar) kemiska reaktioner, vilket är nödvändigt för allt levande. Den naturliga funktionen för HCAII är att katalysera omvandlingen av gasen koldioxid till vätekarbonat, som är löslig i vätska. Detta är viktigt bl.a. för att koldioxid som bildas i kroppen, och fraktas i blodet i form av vätekarbonat, skall hinna över till utandningsluften under den korta tid blodet är i lungorna.Proteiner består av aminosyror som länkats samman i en lång kedja, där varje aminosyra är en av de 20 naturliga aminosyratyperna. Ett proteins struktur och egenskaper bestäms av aminosyrasekvensen, som i sin tur bestäms av genen för just det proteinet. Med genteknik kan ett proteins gen ändras (muteras), så att aminosyrasekvensen ändras, och det har här utnyttjats för att förändra HCAIIs katalytiska egenskaper. Förutom dess naturliga funktion kan HCAII även klyva (hydrolysera) vissa estrar. Mutationer gjordes så att en ’ficka’ i HCAIIs struktur, där molekylerna (substraten) som skall klyvas binder, fick en större volym. På så sätt skapades varianter med en kraftigt ökad kapacitet för att hydrolysera långa estersubstrat jämfört med icke-muterat HCAII. Som en utveckling av detta projekt skapades en mutant av HCAII, som kan hydrolysera ett än mer skrymmande substrat.I ett annat projekt har en ny katalytisk aktivitet skapats i HCAII, som inte utnyttjar enzymets naturliga katalytiska förmåga. Ett nytt estersubstrat konstruerades, med en del som binder kraftigt till HCAII, så att en stark substratbindning erhölls. Sedan muterades vissa aminosyror till en reaktiv aminosyra som heter histidin. Valet av positioner för mutation baserades på en datormodell av enzymet med bundet substrat. Eftersom histidin kan delta i hydrolysreaktioner, får det muterade enzymet möjlighet att klyva substratet. Flera olika mutanter testades, och den effektivaste innehöll ett nära kopplat par av histidiner. Denna mutant undersöktes mer noggrannt, vilket gav viss information om den katalytiska mekanismen.Det långsiktiga målet med detta arbete är att konstruera muterade enzymer som kan klyva giftiga ämnen, eller användas vid framställning av kemikalier. Det finns behov av nya enzymer för olika typer av substrat, och att med rationella metoder skapa nya katalytiska aktiviteter i proteiner är ett svårt vetenskapligt problem som ännu är i ett tidigt utvecklingsskede.
|
|
