| 1. |
- Ahrné, Karin, et al.
(författare)
-
Tillstånd och trender för arter och deras livsmiljöer – rödlistade arter i Sverige 2015
- 2015
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- 2015 års upplaga av den svenska rödlistan är den fjärde i ordningen. Den är baserad på IUCN:s rödlistningskriterier och revideras vart femte år. I rödlistan bedöms risken som enskilda arter av djur, växter och svampar löper att försvinna från Sverige. Bedömningen utförs av ArtDatabankens medarbetare i samverkan med över 100 externa experter, indelade i 14 expertkommittéer för olika organismgrupper. Under arbetet med 2015 års rödlista har tillstånd och trender bedömts för 21 600 arter och 1 318 lägre taxa (apomiktiska arter, underarter och varieteter), sammanlagt ca 22 900 taxa. Av de bedömda arterna klassificerades 2 029 som hotade (kategorierna CR, EN och VU) och 4 273 som rödlistade (inkluderar även kategorierna NT, RE och DD). Förhållandet mellan antalet rödlistade och antalet bedömda arter ar 19,8 %, vilket är ungefär samma värde som 2010 och 2005. I denna rapport jämförs antalet och andelen rödlistade arter mellan olika organismgrupper, biotoper, substrat och påverkansfaktorer. Texten ar indelad i en allmän del och åtta kapitel inriktade på olika landskapstyper. Landskapstyperna utgör en grov indelning av landets miljöer enligt följande kategorier: Skog, Jordbrukslandskap, Urbana miljöer, Fjäll, Våtmarker, Sötvatten, Havsstränder och Havsmiljöer. Skogen och jordbrukslandskapet är de artrikaste landskapstyperna med 1 800 respektive 1 400 arter som har en stark anknytning dit, och ytterligare flera hundra arter som förekommer där mer sporadiskt. De faktorer som påverkar flest rödlistade arter i Sverige är skogsavverkning och igenväxning, som båda utgör ett hot mot vardera ca 30 % av de rödlistade arterna. Avverkning minskar arealen av skog där naturliga strukturer och naturlig dynamik upprätthålls, och den orsakar därmed förlust av livsmiljöer. Igenväxning orsakas av ett antal faktorer, bland annat upphörande hävd (bete och slåtter), gödsling, trädplantering och brist på naturliga störningsregimer som t.ex. regelbundna översvämningar kring vattendrag och sjöar. Andra viktiga påverkansfaktorer är fiske, torrläggning av våtmarker, tillbakagång hos värdarter (främst alm och ask som drabbats av invasiva svampsjukdomar), klimatförändringar och konkurrens från invasiva arter. IUCN:s rödlisteindex beräknas för ett urval av de bedömda organismgrupperna. Rödlisteindex visar att skillnaderna mellan rödlistorna från 2000, 2005, 2010 och 2015 är små. Ett par undantag finns dock. Groddjur och stora däggdjur har fått en något förbättrad situation sedan 2000. Totalt förefaller det ändå som att trycket mot Sveriges artstock har förblivit relativt konstant under de senaste 15 åren.
|
|
| 2. |
- Earon, Robert, et al.
(författare)
-
Groundwater Resources Potential in Hard Rock Terrain : A Multivariate Approach
- 2014
-
Ingår i: Ground Water. - : John Wiley & Sons. - 0017-467X .- 1745-6584.
-
Tidskriftsartikel (refereegranskat)abstract
- Groundwater resources are limited and difficult to predict in crystalline bedrock due to heterogeneity and anisotropy in rock fracture systems. Municipal-level governments often lack the resources for traditional hydrogeological tests when planning for sustainable use of water resources. A new methodology for assessing groundwater resources potential (GRP) based on geological and topographical factors using principal component analysis (PCA) and analysis of variance (ANOVA) was developed and tested. ANOVA results demonstrated statistically significant differences in classed variable groups as well as in classed GRP scores with regard to hydrogeological indicators, such as specific capacity (SC) and transmissivity. Results of PCA were used to govern the weight of the variables used in the prediction maps. GRP scores were able to identify 79% of wells in a verification dataset, which had SC values less than the total dataset median. GRP values showed statistically significant correlations using both parametric (using transformed datasets) and non-parametric methods. The method shows promise for municipal or regional level planning in crystalline terrains with high levels of heterogeneity and anisotropy as a hydrogeologically and statistically based tool to assist in assessing groundwater resources. The methodology is executed in a geographic information systems environment, and uses often readily available data, such as geological maps, feature maps and topography, and thus does not require expensive and time-consuming aquifer tests.
|
|
| 3. |
- Cullinane, Kevin
(författare)
-
Targeting the Environmental Sustainability of European Shipping: The Need for Innovation in Policy and Technology
- 2014
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- At their Summit meeting in Gothenburg in June 2001, Europe’s heads of state and government reached agreement on a European strategy for sustainable development. The social and economic dimensions of the Lisbon strategy were complemented by an environmental dimension. Thus, the Gothenburg Summit represents a breakthrough for sustainable development in the European Union (EU). The University of Gothenburg and Chalmers University of Technology made a commitment to serve, through the joint Centre for Environment and Sustainability (GMV), as a hub for research and scientific follow up of the EU sustainable development strategy. In order to fulfill this commitment, the two universities have established a European Panel for Sustainable Development (EPSD), together with Lund University. In addition, individual members from other universities and research institutes contribute to the work of the Panel. The Centre for Environment and Sustainability (GMV) in Gothenburg is the lead organization in the EPSD. The first report produced by the Panel in 2004 was “From Here to Sustainability – Is the Lisbon/Gothenburg Agenda Delivering?” This was put forward as an independent contribution from academics to the mid-term review of the Lisbon strategy for growth, competitiveness and jobs. The second report “Make the Kok-report sustainable” was produced by the EPSD as a reflection on, and a response to, the mid-term review on the Lisbon strategy chaired by the former Prime Minister of the Netherlands, Wim Kok. The third report “Towards a Smart Growth Strategy for Sustainable Development” aimed to contribute to the re-launch of the EU sustainable development strategy. It contained a critical assessment of “A Platform for Action”, the proposal for an updated strategy put forward by the European Commission. The fourth report “TAKING CHILDREN SERIOUSLY – How the EU can Invest in Early Childhood Education for a Sustainable Future” presented research on children’s interest and ability to understand questions on the social, economic and environmental dimensions of sustainable development. The present report “Targeting the Environmental Sustainability of European Shipping: The Need for Innovation in Policy and Technology” has emerged from a background survey with the aim of mapping what is being done on sustainable shipping within the European Union. A wide scope of strategic EU policy sectors and documents, including existing directives, legislation and regulations on shipping were scrutinized to describe the actual knowledge framework. The background study defines areas where new research could contribute in closing knowledge gaps, and gives a compilation of directives and policy documents concerning sustainable shipping in a European perspective. Based on a definition of sustainable shipping that include all three pillars of sustainable development, the present report presents a holistic view and strategies for achieving a sustainable shipping industry. The report provides scientifically based knowledge of various aspects that affect sustainability at sea, such as particles, greenhouse gases, ship wrecks, ship recycling, and intermodality, as well as a comprehensive overview and updates on regulations. These various areas are presented as separate chapters and solid recommendations are presented on future actions (on EU and international level) to make the shipping industry in Europe a sustainable business. The main author of the report was Prof. Kevin Cullinane, Edinburgh Napier University, UK. The separate chapters in the report were written by Lars Barregård, University of Gothenburg, Erik Fridell, Hulda Winnes, IVL Swedish Environmental Research Institute (Particle emission from ships); Hannes Johnson 1 , Chalmers University of Technology (GHG Emissions and the Energy Efficiency Gap in Shipping); Peter Domini, Stena Metall (Ship Recycling: A Global Issue); Lars Barregård, University of Gothenburg (The Health Risks Associated with the Ship Breaking Industry); Ida-Maja Hassellöv, Chalmers University of Technology (Potentially Polluting Shipwrecks); Abhinayan Basu Bal, University of Gothenburg (Sustainable Intermodal Transport with Short Sea Shipping in the EU); A number of researchers and knowledgeable persons have constituted a reference group and further contributed to the report: Katarina Gårdfeldt, Maria Svane, Dan Strömberg, and Jonas Norrman, GMV, Gothenburg; Karin Andersson, Björn Södahl, Josefin Borg, and Oliver Lindqvist, Chalmers University of Technology; Lars Göran Malmberg, Johan Boman, Johan Woxenius, and Mattias Hallquist, University of Gothenburg, Christer Forsgren, Stena Metall; Anders Carlberg, Vgregion; Carl Carlsson, Swedish Shipowners Association, and Axel Wenblad, Former GD National Board of Fisheries. Dan Strömberg, and Maria Svane, University of Gothenburg, have been invaluable during the course of the project and as editors of the publication. The report has been endorsed by the EPSD. Bo Samuelsson Chairman of EPSD
|
|
| 4. |
- Ekener, Elisabeth, 1963-, et al.
(författare)
-
Developing Life Cycle Sustainability Assessment methodology by applying values-based sustainability weighting - Tested on biomass based and fossil transportation fuels
- 2018
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 181, s. 337-351
-
Tidskriftsartikel (refereegranskat)abstract
- The production and use of transportation fuels can lead to sustainability impacts. Assessing them simultaneously in a holistic way is a challenge. This paper examines methodology for assessing the sustainability performance of products in a more integrated way, including a broad range of social impacts. Life Cycle Sustainability Assessment (LCSA) methodology is applied for this assessment. LSCA often constitutes of the integration of results from social LCA (S-LCA), environmental life cycle assessment (E-LCA) and life cycle costing (LCC). In this study, an S-LCA from an earlier project is extended with a positive social aspect, as well as refined and detailed. E-LCA and LCC results are built from LCA database and literature. Multi Criteria Decision Analysis (MCDA) methodology is applied to integrate the results from the three different assessments into an LCSA. The weighting of key sustainability dimensions in the MCDA is performed in different ways, where the sustainability dimensions are prioritized differently priority based on the assumed values of different stakeholder profiles (Egalitarian, Hierarchist, and Individualist). The developed methodology is tested on selected biomass based and fossil transportation fuels - ethanol produced from Brazilian sugarcane and US corn/maize, and petrol produced from Russian and Nigerian crude oils, where it delineates differences in sustainability performance between products assessed. The outcome in terms of relative ranking of the transportation fuel chains based on sustain ability performance differs when applying different decision-maker profiles. This result highlights and supports views that there is no one single answer regarding which of the alternatives that is most sustainable. Rather, it depends strongly upon the worldview and values held by the decision maker. A key conclusion is that sustainability assessments should pay more attention to potential differences in underlying values held by key stakeholders in relevant societal contexts. The LCSA methodology still faces challenges regarding results integration but MCDA in combination with stakeholder profiles appears to be a useful approach to build on further.
|
|
| 5. |
|
|
| 6. |
- André, Hampus, 1989
(författare)
-
Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products
- 2018
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Natural resources such as ecosystems, land, water and metals underpin the functioning of economies and human well-being, and are becoming increasingly scarce due to growth in population and affluence. Metals are increasingly demanded for their specific properties as modern technology develops. The dependence on metals is of growing concern due to the environmental impacts related, for example, to energy use and local impacts from mining, as well as the scarcity risks posed by socio-economic, geological and geopolitical constraints. Thus, there is a clear need to use metals and other natural resources more efficiently. The vision of a circular economy has been proposed as a way to do this, for example by improving durability, reusing, repairing and recycling. Such so-called resource-efficiency (RE) measures are commonly assumed to be environmentally beneficial, although the evidence is not plentiful. It is plausible that focusing on recirculating products and materials could shift burdens to other environmental impacts or life cycle stages. It has therefore been argued that a life cycle-based approach, such as in life cycle assessment (LCA), is useful to critically assess the environmental implications of RE measures. LCA aims to quantify the environmental impacts of products over their entire life cycles - from cradle to grave - assessing a wide range of impacts such as toxicity, climate change and metal resource use. For metal resource use, however, there are a number of perspectives as to what constitutes the actual environmental problem. These perspectives are represented in a variety of life cycle impact assessment methods (LCIA) which have previously been shown to give diverging results. Electronic products are emblematic of metal resource use challenges since they deploy a broad spectrum of scarce metals. This thesis aims to provide knowledge on the potential for RE measures to reduce the environmental impacts of electronic products, by addressing the following research questions: (1) What resource-efficiency measures result in reduced potential environmental impacts and resource use – for what types of products and under what conditions? (2) How does extended use of electronic products through design for increased technical lifetime, reuse and repair affect environmental impacts, particularly metal resource use? (3) How does the application of different LCIA methods for metal resource use influence interpretations of resource-efficiency measures applied to electronic products? This thesis builds on three appended papers which are all based on comparative assessments of resource efficiency, studied as resource use and environmental impacts per function delivered, using LCA and material flow analysis. The results indicate that extended use of electronic products through increasing technical lifetimes, reusing and repairing, is generally resource-efficient. Exceptions may occur, however, if extended use is insufficient to motivate impacts from producing more durable products or spare parts. Use extension of electronic products leads to resource efficiency in two distinct ways: through the intended use extension and by increasingly steering material flows into recycling. Further resource efficiency could be realised by combining RE measures over the entire life cycles of products. With regards to metal resource use, the choice of LCIA method can influence the interpretation of the results of RE measures for electronic products. Therefore, it is advisable to use several complementary LCIA methods to minimise the risks of overlooking potentially important resources issues. Furthermore, better understanding and transparency of such issues is valuable in order to provide more comprehensive information to decision-makers.
|
|
| 7. |
|
|
| 8. |
- Blennow, Kristina, et al.
(författare)
-
Societal impacts of storm damage
- 2013
-
Ingår i: Living with Storm Damage to Forests. What science can tell us. - 9789525980097 ; :3, s. 70-77
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 9. |
|
|
| 10. |
- Nikopoulou, Zoi, 1975, et al.
(författare)
-
The role of a cap-and-trade market in reducing NOx and SOx emissions: Prospects and benefits for ships within the Northern European ECA
- 2013
-
Ingår i: Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. - : SAGE Publications. - 1475-0902 .- 2041-3084. ; 227:2, May 2013, s. 136-154
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents a financial evaluation of alternative approaches to the abatement of NOx and SOx emissions from ships operating within the emission control area (ECA) of Northern Europe. The objective of this article is to assess the financial viability of a range of alternative technologies and fuel types, by accounting for revenue that might be generated from emissions trading within a cap-and-trade market for NOx and SOx emissions. Using a sample of real ships that operate within the ECA, NOx and SOx emissions for each alternative are estimated, and the revenue generated within a cap-and-trade system is calculated under a given set of assumptions. The results suggest that distillates are not an economic solution to meeting regulatory requirements. Conservative estimates of revenue generated within any prospective cap-and-trade system suggest that seawater scrubbers and Humid Air Motor (HAM) and Selective Catalytic Reduction (SCR) systems would all constitute financially attractive abatement options, while the use of liquefied natural gas (LNG) is the most financially attractive alternative. A cap-and-trade system is found to be highly efficacious in providing a relatively inexpensive source of finance for investments in improved environmental performance, as well as incentivizing such improvements, thereby removing any requirement for public sector support.
|
|
