| 1. |
- Lai, Chung-Chuan, et al.
(författare)
-
Effect of substrate roughness and material selection on the microstructure of sputtering deposited boron carbide thin films
- 2022
-
Ingår i: Surface & Coatings Technology. - Lausanne, Switzerland : Elsevier. - 0257-8972 .- 1879-3347. ; 433
-
Tidskriftsartikel (refereegranskat)abstract
- Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and price of 3He, the standard material for neutron detection. The microstructure of the B4C films is closely related to the important properties, e.g. density and adhesion, for the converting layers, which eventually affect the detection efficiency and the long-term stability of the detectors. To study the influence from substrates of different roughness and materials, the B4C films were deposited on polished Si substrates with Al, Ti, and Cu buffer layers and unpolished Si, Al, Ti, and Cu substrates by direct current magnetron sputtering at a substrate temperature of 623 K. The tapered columnar grains and nodular defects, generally observed in SEM images, indicated a strong shadowing effect where voids were introduced around the grains. The change in the grain size did not show a direct dependence to the substrate roughness, acquired from the surface profile, nor to the mass density of the films, obtained from reflectivity patterns. However, films with non-uniform size of columnar grains were deposited on substrates with high skewness, leading to a drop of mass density from ∼95% down to ∼70% of tabulated bulk density. On the other hand, similar microstructures and mass density were obtained from the films deposited on Al, Ti, and Cu of different roughness and good adhesion were observed from cross-cut adhesion tests, showing the reliability of sputtering deposited B4C films on common structural materials in neutron detectors.
|
|
| 2. |
- Mernelius, Sara, et al.
(författare)
-
Compliance with hygiene guidelines : The effect of a multimodal hygiene intervention and validation of direct observations
- 2013
-
Ingår i: American Journal of Infection Control. - : Elsevier. - 0196-6553 .- 1527-3296. ; 41:5, s. E45-E48
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundGood compliance with hygiene guidelines is essential to prevent bacterial transmission and health care-associated infections. However, the compliance is usually <50%.MethodsA multimodal and multidisciplinary hygiene intervention was launched once the baseline compliance was determined through direct observations in 4 departments of obstetrics and gynecology. Detailed evaluations of the compliance rates were performed at point of stability (at 80%) and follow-up (3 years after hygiene intervention). Validation of direct observations was performed using blinded double appraisal and multiappraisal.ResultsAt baseline, the compliance with barrier precautions and the dress code at the 4 departments were 39% to 47% and 79% to 98%, respectively. Point of stability was reached approximately 1 year after the hygiene intervention was launched. The compliance with barrier precautions was significantly higher at follow-up compared with baseline in 3 departments. In the validation by double appraisal, 471 of 483 components were judged identical between observers. In the multiappraisal, 95% to 100% of the observers correctly judged the 7 components.ConclusionIt is possible to improve compliance with hygiene guidelines, but, to ensure a long-lasting effect, a continuous focus on barrier precautions is required. Observation is a valid method to monitor compliance.
|
|
| 3. |
- Berggren, Magnus, et al.
(författare)
-
PEDOT : PSS-Based Electrochemical Transistors for Ion-to-Electron Transduction and Sensor Signal Amplification
- 2008. - 1
-
Ingår i: Organic Semiconductors in Sensor Applications. - Berlin, Heidelberg : Springer. - 9783540763147 - 9783540763130 - 9783642095177 ; , s. 263-280
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- The chapter reports the use of organic electrochemical transistors in sensor applications. These transistors are excellent ion-to-electron transducers and can serve as very sensitive transducers in amperometric sensor applications. To further improve their sensitivity, we outline various amplification circuits all realized in organic electrochemical transistors.
|
|
| 4. |
- Svensson, Per-Olof, et al.
(författare)
-
A sensor circuit using reference-based conductance switching in organic electrochemical transistors
- 2008
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 93:20, s. 203301-
-
Tidskriftsartikel (refereegranskat)abstract
- Using organic electrochemical transistors as sensors, the sample-receptor reaction often induces moderate changes only in the drain current dynamics as the gate voltage level is switched. Here, we report an electrochemical sensor circuit including electrochemical transistors based on poly(3,4-ethylenedioxythiophene) doped with polystyrenesulfonate that puts out a static sensor response signal. The circuit includes a sample and a reference transistor that are both driven in the resistive mode at 0.1 V. Measurements were performed on aqueous salt electrolytes ranging from 100 to 500 mM concentrations. The signal-ON sensor circuit provides a tenfold increase in the sensitivity as compared to single transistor sensors.
|
|
| 5. |
- Robinson, Nathaniel D, 1973-, et al.
(författare)
-
On the Current Saturation Observed in Electrochemical Polymer Transistors
- 2006
-
Ingår i: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 153, s. 39-44
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical transistors based on conjugated polymers are proposed as a path to printed electronics on paper. The electrochemical doping/dedoping of conjugated polymers clearly plays a role in the current vs potential (I-V) characteristics of these devices, however, the mechanism of current saturation (often referred to as pinch-off) is not clearly understood, and the relationship between electrochemical devices and field-effect transistors is unclear. This paper offers a semiempirical model of the steady-state behavior of electrochemical transistors and compares this model with experimental observations of potential and electrochromic measurements within a device to illustrate the science behind the functionality observed. ©2006 The Electrochemical Society
|
|
| 6. |
|
|
| 7. |
- Said, Elias, et al.
(författare)
-
Visualizing the Electric Field in Electrolytes Using Electrochromism from a Conjugated Polymer
- 2005
-
Ingår i: Electrochemical and solid-state letters. - : The Electrochemical Society. - 1099-0062 .- 1944-8775. ; 8:2, s. H12-H16
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochromic polymer films, employed as display elements, smart windows, and the base material for electrochemical electronic devices, can be addressed solely through ionic transport via an electrolyte, without direct electronic connection as typically employed in the above examples. We present a demonstration of induced electrochromism to quantify the direction and magnitude of the electric field in an electrolyte using poly(3,4-ethylenedioxythiophene) doped with polystyrene-sulfonate. After further development, this simple yet effective technique will be potentially applicable for optimizing batteries and fuel cells, as the active detection element in electrochemical sensors and as a detector in ionic separation in electrolytes (electrophoresis).
|
|
| 8. |
- Andersson, Peter, et al.
(författare)
-
Organic Electrochemical Smart Pixels
- 2003
-
Ingår i: Materials Research Society Symposium Proceedings. ; , s. D6.6-
-
Konferensbidrag (refereegranskat)
|
|
| 9. |
|
|
| 10. |
|
|
