| 1. |
- Li, Zhaojun, 1989, et al.
(författare)
-
High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.
- 2016
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 138:34, s. 10935-44
-
Tidskriftsartikel (refereegranskat)abstract
- Growing interests have been devoted to the design of polymer acceptors as potential replacement for fullerene derivatives for high-performance all polymer solar cells (all-PSCs). One key factor that is limiting the efficiency of all-PSCs is the low fill factor (FF) (normally
|
|
| 2. |
- Zhang, Zhao Yang, et al.
(författare)
-
Photochemical Phase Transitions Enable Coharvesting of Photon Energy and Ambient Heat for Energetic Molecular Solar Thermal Batteries That Upgrade Thermal Energy
- 2020
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 142:28, s. 12256-12264
-
Tidskriftsartikel (refereegranskat)abstract
- Discovering physicochemical principles for simultaneous harvesting of multiform energy from the environment will advance current sustainable energy technologies. Here we explore photochemical phase transitions - a photochemistry-thermophysics coupled regime - for coharvesting of solar and thermal energy. In particular, we show that photon energy and ambient heat can be stored together and released on demand as high-temperature heat, enabled by room-temperature photochemical crystal↔liquid transitions of engineered molecular photoswitches. Integrating the two forms of energy in single-component molecular materials is capable of providing energy capacity beyond that of traditional solar or thermal energy storage systems based solely on molecular photoisomerization or phase change, respectively. Significantly, the ambient heat that is harvested during photochemical melting into liquid of the low-melting-point, metastable isomer can be released as high-temperature heat by recrystallization of the high-melting-point, parent isomer. This reveals that photon energy drives the upgrading of thermal energy in such a hybrid energy system. Rationally designed small-molecule azo switches achieve high gravimetric energy densities of 0.3-0.4 MJ/kg with long-term storage stability. Rechargeable solar thermal battery devices are fabricated, which upon light triggering provide gravimetric power density of about 2.7 kW/kg and temperature increases of >20 °C in ambient environment. We further show their use as deicing coatings. Our work demonstrates a new concept of energy utilization - combining solar energy and low-grade heat into higher-grade heat - which unlocks the possibility of developing sustainable energy systems powered by a combination of natural sunlight and ambient heat.
|
|
| 3. |
- Hagman, Benjamin, et al.
(författare)
-
Steps Control the Dissociation of CO2 on Cu(100)
- 2018
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 140:40, s. 12974-12979
-
Tidskriftsartikel (refereegranskat)abstract
- CO2 reduction reactions, which provide one route to limit the emission of this greenhouse gas, are commonly performed over Cu-based catalysts. Here, we use ambient pressure X-ray photoelectron spectroscopy together with density functional theory to obtain an atomistic understanding of the dissociative adsorption of CO2 on Cu(100). We find that the process is dominated by the presence of steps, which promote both a lowering of the dissociation barrier and an efficient separation between adsorbed O and CO, reducing the probability for recombination. The identification of steps as sites for efficient CO2 dissociation provides an understanding that can be used in the design of future CO2 reduction catalysts.
|
|
| 4. |
- Sekretaryova, Alina N., et al.
(författare)
-
Electrocatalytic Currents from Single Enzyme Molecules
- 2016
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 138:8, s. 2504-2507
-
Tidskriftsartikel (refereegranskat)abstract
- Single molecule enzymology provides an opportunity to examine details of enzyme mechanisms that are not distinguishable in biomolecule ensemble studies. Here we report, for the first time, detection of the current produced in an electrocatalytic reaction by a single redox enzyme molecule when it collides with an ultramicroelectrode. The catalytic process provides amplification of the current from electron-transfer events at the catalyst leading to a measurable current. This new methodology monitors turnover of a single enzyme molecule. The methodology might complement existing single molecule techniques, giving further insights into enzymatic mechanisms and filling the gap between fundamental understanding of biocatalytic processes and their potential for bioenergy production.
|
|
| 5. |
- Rahm, Martin, 1982, et al.
(författare)
-
Electronegativity Seen as the Ground-State Average Valence Electron Binding Energy
- 2019
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 141:1, s. 342-351
-
Tidskriftsartikel (refereegranskat)abstract
- We introduce a new electronegativity scale for atoms, based consistently on ground-state energies of valence electrons. The scale is closely related to (yet different from) L. C. Allen's, which is based on configuration energies. Using a combination of literature experimental values for ground-state energies and ab initio-calculated energies where experimental data are missing, we are able to provide electronegativities for elements 1-96. The values are slightly smaller than Allen's original scale, but correlate well with Allen's and others. Outliers in agreement with other scales are oxygen and fluorine, now somewhat less electronegative, but in better agreement with their chemistry with the noble gas elements. Group 11 and 12 electronegativities emerge as high, although Au less so than in other scales. Our scale also gives relatively high electronegativities for Mn, Co, Ni, Zn, Tc, Cd, Hg (affected by choice of valence state), and Gd. The new electronegativities provide hints for new alloy/compound design, and a framework is in place to analyze those energy changes in reactions in which electronegativity changes may not be controlling.
|
|
| 6. |
- Wang, Yuanmo, 1986, et al.
(författare)
-
Counting the Number of Glutamate Molecules in Single Synaptic Vesicles
- 2019
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 141:44, s. 17507-17511
-
Tidskriftsartikel (refereegranskat)abstract
- Analytical tools for quantitative measurements of glutamate, the principal excitatory neurotransmitter in the brain, are lacking. Here, we introduce a new enzyme-based amperometric sensor technique for the counting of glutamate molecules stored inside single synaptic vesicles. In this method, an ultra-fast enzyme-based glutamate sensor is placed into a solution of isolated synaptic vesicles, which stochastically rupture at the sensor surface in a potential-dependent manner at a constant negative potential. The continuous amperometric signals are sampled at high speed (10 kHz) to record sub-millisecond spikes, which represent glutamate release from single vesicles that burst open. Glutamate quantification is achieved by a calibration curve that is based on measurements of glutamate release from vesicles pre-filled with various glutamate concentrations. Our measurements show that an isolated single synaptic vesicle encapsulates about 8000 glutamate molecules and is comparable to the measured exocytotic quantal glutamate release in amperometric glutamate sensing in the nucleus accumbens of mouse brain tissue. Hence, this new methodology introduces the means to quantify ultra-small amounts of glutamate and to study synaptic vesicle physiology, pathogenesis, and drug treatments for neuronal disorders where glutamate is involved.
|
|
| 7. |
- Amombo Noa, Francoise Mystere, 1988, et al.
(författare)
-
Chiral Lanthanum Metal-Organic Framework with Gated CO2 Sorption and Concerted Framework Flexibility br
- 2022
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:19, s. 8725-8733
-
Tidskriftsartikel (refereegranskat)abstract
- A metal-organic framework (MOF)CTH-17based on lanthanum-(III) and the conformationally chiral linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)-benzene, cpb6-: [La2(cpb)]middot1.5dmf was prepared by the solvothermal method indimethylformamide (dmf) and characterized by variable-temperature X-raypowder diffraction (VTPXRD), variable-temperature X-ray single-crystal diffrac-tion (SCXRD), and thermogravimetric analysis (TGA).CTH-17is a rod-MOFwith new topologyoch. It has high-temperature stability with Sohncke spacegroupsP6122/P6522 at 90 K andP622 at 300 and 500 K, all phases characterizedwith SCXRD and at 293 K also with three-dimensional (3D) electron diffraction. VTPXRD indicates a third phase appearing after620 K and stable up to 770 K. Gas sorption isotherms with N2indicate a modest surface area of 231 m2g-1forCTH-17, roughly inagreement with the crystal structure. Carbon dioxide sorption reveals a gate-opening effect ofCTH-17where the structure opens upwhen the loading of CO2reaches approximately similar to 0.45 mmol g-1or 1 molecule per unit cell. Based on the SCXRD data, this isinterpreted asflexibility based on the concerted movements of the propeller-like hexatopic cpb linkers, the movementintramolecularly transmitted by the pi-pi stacking of the cpb linkers and helped by thefluidity of the LaO6coordination sphere. Thiswas corroborated by density functional theory (DFT) calculations yielding the chiral phase (P622) as the energy minimum and acompletely racemic phase (P6/mmm), with symmetric cpb linkers representing a saddle point in a racemization process
|
|
| 8. |
- Brumer, Harry, et al.
(författare)
-
Activation of crystalline cellulose surfaces though the chemoenzymatic modification of xyloglucan
- 2004
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 126:18, s. 5715-1721
-
Tidskriftsartikel (refereegranskat)abstract
- Cellulose constitutes an important raw material for many industries. However, the superb load-bearing properties of cellulose are accompanied by poor chemical reactivity. The hydroxyl groups on cellulose surfaces can be reacted but usually not without loss of fiber integrity and strength. Here, we describe a novel chemoenzymatic approach for the efficient incorporation of chemical functionality onto cellulose surfaces. The modification is brought about by using a transglycosylating enzyme, xyloglucan endotranglycosylase, to join chemically modified xyloglucan oligosaccharides to xyloglucan, which has a naturally high affinity to cellulose. Binding of the chemically modified hemicellulose molecules can thus be used to attach a wide variety of chemical moieties without disruption of the individual fiber or fiber matrix.
|
|
| 9. |
- Davidson, M., et al.
(författare)
-
Fluid mixing in growing microscale vesicles conjugated by surfactant nanotubes
- 2005
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 127:4, s. 1251-1257
-
Tidskriftsartikel (refereegranskat)abstract
- This work addresses novel means for controlled mixing and reaction initiation in biomimetic confined compartments having volume elements in the range of 10-12 to 10-15 L. The method is based on mixing fluids using a two-site injection scheme into growing surfactant vesicles. A solid-state injection needle is inserted into a micrometer-sized vesicle (radius 5-25 μm), and by pulling on the needle, we create a nanoscale surfactant channel connecting injection needle and the vesicle. Injection of a solvent A from the needle into the nanotube results in the formation of a growing daughter vesicle at the tip of the needle in which mixing takes place. The growth of the daughter vesicle requires a flow of surfactants in the nanotube that generates a flow of solvent B inside the nanotube which is counterdirectional to the pressure-injected solvent. The volume ratio ψ between solvent A and B inside the mixing vesicle was analyzed and found to depend only on geometrical quantities. The majority of fluid injected to the growing daughter vesicle comes from the pressure-based injection, and for a micrometer-sized vesicle it dominates. For the formation of one daughter vesicle (conjugated with a 100-nm radius tube) expanded from 1 to 200 μm in radius, the mixing ratios cover almost 3 orders of magnitude. We show that the system can be expanded to linear strings of nanotube-conjugated vesicles that display exponential dilution. Mixing ratios spanning 6 orders of magnitude were obtained in strings of three nanotube-conjugated micrometer-sized daughter vesicles.
|
|
| 10. |
- Emanuelsson, Rikard, et al.
(författare)
-
An All-Organic Proton Battery
- 2017
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 139:13, s. 4828-4834
-
Tidskriftsartikel (refereegranskat)abstract
- Rechargeable batteries that use organic matter as. the capacity-carrying material have previously been considered a technology for the future. Earlier batteries in which both the anode and cathode consisted of organic material required significant amounts of conductive additives and were often based on metal-ion electrolytes containing Li+ or Na+. However, we have used conducting poly(3,4-ethylenedioxythiophene) (PEDOT), functionalized with anthraquinone (PEDQT-AQ) or, benzonquinone (PEDOT-BQ) pendant groups as the negative and positive electrode materials, respectively, to make an all-organic proton battery devoid of metals. The electrolyte consists of a proton donor and acceptor slurry containing substituted pyridinium triflates and the corresponding pyridine base. This slurry allows the 2e(-)/2H(+) quinone/hydroquinone redox reactions while suppressing proton reduction in the battery cell. By using strong (acidic) proton donors, the formal potential of the quinone redox reactions is tuned into the potential region in which the PEDOT backbone is conductive, thus eliminating the need for conducting additives. In this all-organic proton battery cell, PEDOT-AQ and PEDOT-BQ deliver 103 and 120 mAh g(-1), which correspond to 78% and 75%, respectively, of the theoretical specific capacity of the materials at an average cell potential of 0.5 V. We show that PEDOT-BQ determines the cycling stability of the device while PEDOT-AQ provides excellent reversibility for at least 1000 cycles. This proof-of-concept shows the feasibility of assembling all organic proton batteries which require no conductive additives and also reveals where the challenges and opportunities lie on the path to producing plastic batteries.
|
|
