| 1. |
- De Vocht, F, et al.
(författare)
-
A database of exposures in the rubber manufacturing industry: Design and quality control
- 2005
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 49:8, s. 691-701
-
Tidskriftsartikel (refereegranskat)abstract
- The concerted action EXASRUB was initiated to create a database management system for information on occupational hygiene measurements that could be used to develop exposure models in the European rubber manufacturing industry. Quality of coding was assessed by calculating percentages of agreement and Cohen's kappa statistics (kappa) for an intra- and inter-centre recoding of randomly selected subsets of the measurements. In a 6-month period, 59 609 measurements from 523 surveys in 333 factories from as early as 1956 to 2003 were coded. The database consists primarily of measurements of N-nitrosamines (36%), rubber dust (23%), solvents (14%) and rubber fumes (10%). Coding of epidemiologically relevant information was done consistently with inter-centre kappa between 0.86 and 1.00. For occupational hygiene information, values of kappa were estimated to be between 0.67 and 1.00. The proposed method resulted in a large quantity of exposure measurements with auxiliary information of varying completeness and quality. Analyses showed that coding of epidemiologically relevant information in such a multi-centre, multi-country study was coded consistently. Larger errors however, occurred in coding of occupational hygiene information. This was primarily caused by lack of information in the primary records of measurements, emphasizing the importance of having a universal system in place to collect and store measurement information by occupational hygienists for future use.
|
|
| 2. |
- Elfman, Lena, et al.
(författare)
-
Acute Health Effects on Planters of Conifer Seedlings Treated with Insecticides
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 53:4, s. 383-390
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The aim of this study was to assess acute health effects on planters caused by planting conifer seedlings treated with two insecticides, with active ingredients imidacloprid and cypermethrin, in comparison with untreated seedlings. Methods: The investigation was a double-blind crossover study, which included a follow-up of 19 planters over a 3-week period. During Week 1, the 19 planters handled untreated conifer seedlings while they planted imidacloprid- and cypermethrin-treated seedlings during study Week 2 and 3, respectively. Signs and symptoms of acute health effects were documented by a questionnaire, administered by the field staff, during these 3 weeks. Inflammation markers in the nasal mucous membrane were also measured as an objective test. Exposure to cypermethrin was further assessed by measuring 3-phenoxybenzoic acid (3-PBA) in urine. No validated biomarker was available to assess internal exposure to imidacloprid. Results: No clear, acute adverse health effects could be found in planters during the week of exposure to conifer seedlings treated with imidacloprid (Merit Forest) or cypermethrin (Forester), as compared to during the week of planting untreated seedlings. During the week of cypermethrin exposure, the individuals had 3-PBA values that were 12-54% higher (P < 0.05), depending on the worker, than those observed during the untreated week. There were no statistically significant correlations between the raised levels of 3-PBA and self-reported health problems. These results have been obtained during planting in late summer/early autumn and with good use of protective clothing. Conclusions: No clear, acute adverse health effects could be found in planters after exposure to conifer seedlings treated with imidacloprid (Merit Forest) or cypermethrin (Forester), as compared with planting untreated seedlings. The metabolite, 3-PBA, was found in low levels in urine and was increased after exposure to cypermethrin. However, no clear relationships could be found between exposure and reported symptoms or between elevated 3-PBA levels and reported symptoms.
|
|
| 3. |
- Geng, Q., et al.
(författare)
-
Temperature limit values for touching cold surfaces with the fingertip
- 2006
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 50:8, s. 851-862
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: At the request of the European Commission and in the framework of the European Machinery Directive, research was performed in five different laboratories to develop specifications for surface temperature limit values for the short-term accidental touching of the fingertip with cold surfaces. Methods: Data were collected in four laboratories with a total of 20 males and 20 females performing a grand total of 1655 exposures. Each touched polished blocks of aluminium, stainless steel, nylon-6 and wood using the distal phalanx of the index finger with a contact force of 1.0, 2.9 and 9.8 N, at surface temperatures from +2 to -40 degrees C for a maximum duration of 120 s. Conditions were selected in order to elicit varying rates of skin cooling upon contact. Contact temperature (T-C) of the fingertip was measured over time using a T-type thermocouple. Results: A database obtained from the experiments was collated and analysed to characterize fingertip contact cooling across a range of materials and surface temperatures. The database was subsequently used to develop a predictive model to describe the contact duration required for skin contact temperature to reach the physiological criteria of onset of pain (15 degrees C), onset of numbness (7 degrees C) and onset of frostbite risk (0 degrees C). Conclusions: The data reflect the strong link between the risk of skin damage and the thermal properties of the material touched. For aluminium and steel, skin temperatures of 0 degrees C occurs within 2-6 s at surface temperatures of -15 degrees C. For non-metallic surfaces, onset of numbness occurs within 15-65 s of contact at -35 degrees C and onset of cold pain occurs within 5 s of contact at -20 degrees C. The predictive model subsequently developed was a non-linear exponential expression also reflecting the effects of material thermal properties and initial temperature. This model provides information for the protection of workers against the risk of cold injury by establishing the temperature limits of cold touchable surfaces for a broad range of materials, and it is now proposed as guidance values in a new international standard.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Landberg, Hanna, et al.
(författare)
-
Comparison and Evaluation of Multiple Users' Usage of the Exposure and Risk Tool : Stoffenmanager 5.1
- 2015
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 59:7, s. 821-835
-
Tidskriftsartikel (refereegranskat)abstract
- Stoffenmanager is an exposure and risk assessment tool that has a control banding part, with risk bands as outcome and a quantitative exposure assessment part, with the 90th percentile of the predicted exposure as a default outcome. The main aim of the study was to investigate whether multiple users of Stoffenmanager came to the same result when modelling the same scenarios. Other aims were to investigate the differences between outcomes of the control banding part with the measured risk quota and to evaluate the conservatism of the tool by testing whether the 90th percentiles are above the measured median exposures. We investigated airborne exposures at companies in four different types of industry: wood, printing, metal foundry, and spray painting. Three scenarios were modelled and measured, when possible, at each company. When modelled, 13 users visited each company on the same occasion creating individual assessments. Consensus assessments were also modelled for each scenario by six occupational hygienists. The multiple users' outcomes were often spread over two risk bands in the control banding part, and the differences in the quantitative exposure outcomes for the highest and lowest assessments per scenario varied between a factor 2 and 100. Four parameters were difficult for the users to assess and had a large impact on the outcome: type of task, breathing zone, personal protection, and control measures. Only two scenarios had a higher measured risk quota than predicted by the control banding part, also two scenarios had slightly higher measured median exposure value than modelled consensus in the quantitative exposure assessment part. Hence, the variability between users was large but the model performed well.
|
|
| 7. |
- Ludvigsson, Linus, et al.
(författare)
-
Carbon Nanotube Emissions from Arc Discharge Production: Classification of Particle Types with Electron Microscopy and Comparison with Direct Reading Techniques.
- 2016
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 60:4, s. 493-512
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: An increased production and use of carbon nanotubes (CNTs) is occurring worldwide. In parallel, a growing concern is emerging on the adverse effects the unintentional inhalation of CNTs can have on humans. There is currently a debate regarding which exposure metrics and measurement strategies are the most relevant to investigate workplace exposures to CNTs. This study investigated workplace CNT emissions using a combination of time-integrated filter sampling for scanning electron microscopy (SEM) and direct reading aerosol instruments (DRIs). Material and Methods: Field measurements were performed during small-scale manufacturing of multiwalled carbon nanotubes using the arc discharge technique. Measurements with highly time- and size-resolved DRI techniques were carried out both in the emission and background (far-field) zones. Novel classifications and counting criteria were set up for the SEM method. Three classes of CNT-containing particles were defined: type 1: particles with aspect ratio length:width >3:1 (fibrous particles); type 2: particles without fibre characteristics but with high CNT content; and type 3: particles with visible embedded CNTs. Results: Offline sampling using SEM showed emissions of CNT-containing particles in 5 out of 11 work tasks. The particles were classified into the three classes, of which type 1, fibrous CNT particles contributed 37%. The concentration of all CNT-containing particles and the occurrence of the particle classes varied strongly between work tasks. Based on the emission measurements, it was assessed that more than 85% of the exposure originated from open handling of CNT powder during the Sieving, mechanical work-up, and packaging work task. The DRI measurements provided complementary information, which combined with SEM provided information on: (i) the background adjusted emission concentration from each work task in different particle size ranges, (ii) identification of the key procedures in each work task that lead to emission peaks, (iii) identification of emission events that affect the background, thereby leading to far-field exposure risks for workers other than the operator of the work task, and (iv) the fraction of particles emitted from each source that contains CNTs. Conclusions: There is an urgent need for a standardized/harmonized method for electron microscopy (EM) analysis of CNTs. The SEM method developed in this study can form the basis for such a harmonized protocol for the counting of CNTs. The size-resolved DRI techniques are commonly not specific enough to selective analysis of CNT-containing particles and thus cannot yet replace offline time-integrated filter sampling followed by SEM. A combination of EM and DRI techniques offers the most complete characterization of workplace emissions of CNTs today.
|
|
| 8. |
- Nilsson, Patrik, et al.
(författare)
-
Characterization of Hairdresser Exposure to Airborne Particles during Hair Bleaching.
- 2016
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 60:1, s. 90-100
-
Tidskriftsartikel (refereegranskat)abstract
- Respiratory symptoms among hairdressers are often ascribed to the use of bleaching powders that contain persulfate salts. Such salts can act as allergens and airway irritants but the mechanisms behind the negative health effects are not fully known. In order to understand why some hairdressers experience respiratory symptoms during, and after, sessions of hair bleaching, it is of importance to characterize how exposure occurs. In this work we used time and particle size resolved instrumentation with the aim to measure the concentration of particles that hairdressers are exposed to during sessions of hair bleaching. We also used filter samples to collect particles for quantitative determination of persulfate (S2O8 (2-)) content and for analysis by light microscopy. Two different types of bleaching powders were used, one marked as dust-free and one without this marking (denoted regular). The time resolved instrumentation revealed that particles <10 µm were emitted, specifically when the regular powder was prepared and mixed with hydrogen peroxide. In contrast to other research our work also revealed that supercoarse particles (>10 µm) were emitted during application of the bleaching, when both the regular and the dust-free powders were used. The measured level of persulfate, sampled in the breathing zone of the hairdressers, was on average 26 µg m(-3) when the regular powder was used and 11 µg m(-3) when the dust-free powder was used. This indicates that use of dust-free powder does not eliminate exposure to persulfates, it only lowers the concentration. We show that the site of sampling, or position of the hairdresser with regards to the hair being bleached, is of high importance in the determination of persulfate levels and exposure. This work focuses on the physical and chemical characterization of the particles released to the air and the results are important for accurate exposure assessments. Accurate assessments may in turn lead to a better understanding of why some hairdressers experience respiratory symptoms from hair bleaching sessions.
|
|
