SwePub
Tyck till om SwePub Sök här!
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "L773:0168 9002 OR L773:1872 9576 ;pers:(Fröjdh Christer 1952)"

Sökning: L773:0168 9002 OR L773:1872 9576 > Fröjdh Christer 1952

  • Resultat 1-10 av 10
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Abdalla, Munir A, et al. (författare)
  • A CMOS APS for dental X-ray imaging using scintillating sensors
  • 2001
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 460:1, s. 197-203
  • Tidskriftsartikel (refereegranskat)abstract
    • In this paper we present an integrating CMOS Active Pixel Sensor (APS) circuit to be used with scintillator type X-ray sensors for intra oral dental X-ray imaging systems. Different pixel architectures were constructed to explore their performance characteristics and to study the feasibility of the development of such systems using the CMOS technology. A prototype 64 x 80 pixel array has been implemented in a CMOS 0.8 mum double poly n-well process with a pixel pitch of 50 mum. A spectral sensitivity measurement for the different pixels topologies, as well as measured X-ray direct absorption in the different APSs are presented. A measurement of the output signal showed a good linearity over a wide dynamic range. This chip showed that the very low sensitivity of the CMOS APSs to direct X-ray exposure adds a great advantage to the various CMOS advantages over CCD-based imaging systems,
  •  
2.
  • Abdalla, Munir A, et al. (författare)
  • An integrating CMOS APS for X-ray imaging with an in-pixel preamplifier
  • 2001
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 466:1, s. 232-236
  • Tidskriftsartikel (refereegranskat)abstract
    • We present in this paper an integrating CMOS Active Pixel Sensor (APS) circuit coated with scintillator type sensors for intra-oral dental X-ray imaging systems. The photosensing element in the pixel is formed by the p-diffusion on the n-well diode. The advantage of this photosensor is its very low direct absorption of X-rays compared to the other available photosensing elements in the CMOS pixel. The pixel features an integrating capacitor in the feedback loop of a preamplifier of a finite gain in order to increase the optical sensitivity. To verify the effectiveness of this in-pixel preamplification, a prototype 32 x 80 element CMOS active pixel array was implemented in a 0.8 mum CMOS double poly, n-well process with a pixel pitch of 50 mum. Measured results confirmed the improved optical sensitivity performance of the APS. Various measurements on device performance are presented.
  •  
3.
  • Badel, Xavier, et al. (författare)
  • Improvement of an X-ray imaging detector based on a scintillating guides screen
  • 2002
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 487:1-2, s. 129-135
  • Tidskriftsartikel (refereegranskat)abstract
    • An X-ray imaging detector has been developed for dental applications. The principle of this detector is based on application of a silicon charge coupled device covered by a scintillating wave-guide screen. Previous studies of such a detector showed promising results concerning the spatial resolution but low performance in terms of signal to noise ratio (SNR) and sensitivity. Recent results confirm the wave-guiding properties of the matrix and show improvement of the detector in terms of response uniformity, sensitivity and SNR. The present study is focussed on the fabrication of the scintillating screen where the principal idea is to fill a matrix of Si pores with a CsI scintillator. The photoluminescence technique was used to prove the wave-guiding property of the matrix and to inspect the filling uniformity of the pores. The final detector was characterized by X-ray evaluation in terms of spatial resolution, light output and SNR. A sensor with a spatial resolution of 9 LP/mm and a SNR over 50 has been achieved using a standard dental X-ray source and doses in the order of those used at the moment by dentists (around 25 mR).
  •  
4.
  • Fröjdh, Christer, 1952-, et al. (författare)
  • New sensors for dental X-ray imaging
  • 1999
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 434:1, s. 24-29
  • Tidskriftsartikel (refereegranskat)
  •  
5.
  •  
6.
  •  
7.
  • Marchal, J, et al. (författare)
  • Active pixel detector for ion beam profiling
  • 2002
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 487:1-2, s. 224-231
  • Tidskriftsartikel (refereegranskat)
  •  
8.
  • Fröjdh, Anna, 1986-, et al. (författare)
  • Processing and characterization of a MEDIPIX2-compatible silicon sensor with 220 mu m pixel size
  • 2011
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 633:Suppl 1, s. S78-S80
  • Tidskriftsartikel (refereegranskat)abstract
    • Pixellated silicon detectors with a pixel size of 220 um have been fabricated at Mid Sweden University. The detectors will be bonded to the MEDIPIX2 [1] readout chip. The purpose is to investigate the performance of an energy sensitive X-ray imaging sensor with reduced charge sharing.The detectors were fabricated on high purity silicon with a wafer thickness of 500 um and a resistivity of more than 15 kohmcm. One reason for the choice of material was to get experience for future work with very thick detectors requiring ultra high resistivity in order to be depleted. During the initial work in this project some issued were found concerning inter pixel resistance and the efficiency of the guard rings. This led to a study of existing papers on the subject [2,3,4,5] and to extensive simulations of the electric field and the charge transport in different parts of the device.A modified process has been developed using alternating p+ and n+ guard rings and an outer n+ doping. The results of the simulations and the process will be described as well as an outline for a process for fabrication of very thick detectors with limited guard ring extension.References[1] - X. Llopart, M. Campbell, R. Dinapoli, D. San Segundo and E. Pernigotti, IEEE Trans. Nucl. Sci., vol. 49, 2279-2283, October 2002.[2] – L. Evensen, A. Hanneborg, B Sundby Avset, M. Mese, Nuclear Instruments and Methods in Physics Research A 337 (1993) 44 – 52[3] – T. Pavalainen, T. Tuuva, K. Leinonen, Nuclear Instruments and Methods in Physics Research A 573 (2007) 277 – 279[4] – Z. Li, W. Huang, L. J. Zhao, IEEE Trans. Nucl. Sci., vol. 47, No. 3. 729 – 735 , June 2000.[5] – D. Han, C. Wang, G. Wang, S. Du, L. Shen, X. Tian, X. Zhang, IEEE Transactions on Electron devices, Vol. 50, No. 2, 537 – 540, February 2003
  •  
9.
  • Fröjdh, Erik, 1984-, et al. (författare)
  • Spectral response of a silicon detector with 220 mu m pixel size bonded to MEDIPIX2
  • 2011
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 633:Supplement 1, s. S125-S127
  • Tidskriftsartikel (refereegranskat)abstract
    • The standard detector used with the MEDIPIX2 [1] readout chip suffers from severe charge sharing that reduces the spectral performance of the device. This problem is expected to be solved in the MEDIPIX3 [2] design. In order to significantly reduce the charge sharing and to make a detector which could be expected to have a similar response to MEDIPIX3 we have fabricated detectors with a pixel size of 220 um and bonded these detectors to the MEDIPIX2 chip using only a limited number of pixels on the readout chip. This makes the active area of the pixel comparable with the area covered by the charge summing in MEDIPIX3.The charge collection properties of the device have been tested by scanning a narrow beam over a pixel. The spectral response has been measured by taking a flood exposure at different tube voltages and comparing the result with the spectrum obtained from exposing the centre of the pixel with a narrow beam thus eliminating the charge sharing. This work represents an improved characterisation as compared to [3].Some initial images of different objects have been taken by placing the device in an X-ray microscope with a nanofocus X-ray tube imaging objects with magnification to simulate the original pixel size of 55 um.References[1] - X. Llopart, M. Campbell, R. Dinapoli, D. San Segundo and E. Pernigotti, IEEE Trans. Nucl. Sci., vol. 49, 2279-2283, October 2002.[2] - R. Ballabriga, M. Campbell, E. H. M. Heijne, X. Llopart, L. Tlustos, IEEE Trans. Nucl. Sci., Vol. 54, No. 5, October 2007.[3] – B. Norlin, C. Fröjdh, G. Thungström, D. Greiffenberg, NSS Conference record,19-25 Oct. 2008, Pages:3464 – 3469, Digital Object Identifier 10.1109/NSSMIC.2008.4775083
  •  
10.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 10

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy