| 1. |
- Ozolins, Oskars, et al.
(författare)
-
100 GHz Externally Modulated Laser for Optical Interconnects
- 2017
-
Ingår i: Journal of Lightwave Technology. - : Institute of Electrical and Electronics Engineers (IEEE). - 0733-8724 .- 1558-2213. ; 35:6, s. 1174-1179
-
Tidskriftsartikel (refereegranskat)abstract
- We report on a 116 Gb/s on-off keying (OOK), four pulse amplitude modulation (PAM) and 105-Gb/s 8-PAM optical transmitter using an InP-based integrated and packaged externally modulated laser for high-speed optical interconnects with up to 30 dB static extinction ratio and over 100-GHz 3-dB bandwidth with 2 dB ripple. In addition, we study the tradeoff between power penalty and equalizer length to foresee transmission distances with standard single mode fiber.
|
|
| 2. |
|
|
| 3. |
- Joharifar, Mahdieh, et al.
(författare)
-
High-Speed 9.6-μm Long-Wave Infrared Free- Space Transmission with a Directly-Modulated QCL and a Fully-Passive QCD
- 2023
-
Ingår i: Journal of Lightwave Technology. - : Institute of Electrical and Electronics Engineers Inc.. - 0733-8724 .- 1558-2213. ; 41:4, s. 1087-
-
Tidskriftsartikel (refereegranskat)abstract
- Free-space optics (FSO) in the mid-infrared (mid- IR) contains rich spectral resources for future ultrahigh-speed wireless communications yet is currently under-exploited. Two atmospheric transmission windows at the mid-IR, namely, the mid-wave IR (MWIR, 3-5 µm) and the long-wave IR (LWIR, 8-12 µm), show great potential in supporting free-space communications for both terrestrial and space application scenarios. Particularly, the LWIR signal with a longer wavelength has high intrinsic robustness against aerosols' scattering and turbulence-induced scintillation and beam broadening effects, which are the main concerns hindering the wide deployment of practical FSO systems. In this context, high-bandwidth semiconductor-based mid-IR FSO transceivers will be desirable to meet the requirements of low energy consumption and small footprints for large-volume development and deployment. Quantum cascade devices, including quantum cascade lasers (QCLs) and quantum cascade detectors (QCDs), appear promising candidates to fulfill this role. In this work, we report a high-speed LWIR FSO transmission demonstration with a 9.6-µm directly-modulated (DM)-QCL and a fully passive QCD without any active cooling or bias voltage. Up to 8 Gb/s, 10 Gb/s, and 11 Gb/s signal transmissions are achieved when operating the DM- QCL at 10°C, 5°C, and 0°C, respectively. These results indicate a significant step towards an envisioned fully-connected mid-IR FSO solution empowered by the quantum cascade semiconductor devices.
|
|
| 4. |
- Leong, Miu Yoong, et al.
(författare)
-
Dimensioning BCH Codes for Coherent DQPSK Systems With Laser Phase Noise and Cycle Slips
- 2014
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 32:21, s. 3446-3450
-
Tidskriftsartikel (refereegranskat)abstract
- Forward error correction (FEC) plays a vital role in coherent optical systems employing multi-level modulation. However, much of coding theory assumes that additive white Gaussian noise (AWGN) is dominant, whereas coherent optical systems have significant phase noise (PN) in addition to AWGN. This changes the error statistics and impacts FEC performance. In this paper, we propose a novel semianalytical method for dimensioning binary Bose-Chaudhuri-Hocquenghem (BCH) codes for systems with PN. Our method involves extracting statistics from pre-FEC bit error rate (BER) simulations. We use these statistics to parameterize a bivariate binomial model that describes the distribution of bit errors. In this way, we relate pre-FEC statistics to post-FEC BER and BCHcodes. Our method is applicable to pre-FEC BER around 10(-3) and any post-FEC BER. Using numerical simulations, we evaluate the accuracy of our approach for a target post-FEC BER of 10(-5). Codes dimensioned with our bivariate binomial model meet the target within 0.2-dB signal-to-noise ratio.
|
|
| 5. |
|
|
| 6. |
- Caut, Alexander, 1994, et al.
(författare)
-
Angled Flip-Chip Integration of VCSELs on Silicon Photonic Integrated Circuits
- 2022
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 40:15, s. 5190-5200
-
Tidskriftsartikel (refereegranskat)abstract
- An investigation of angled flip-chip integration of a singlemode 850 nm vertical-cavity surface-emitting laser (VCSEL) on a silicon nitride photonic integrated circuit (PIC) is presented. Using numerical FDTD simulations, we consider the conditions under which the VCSEL can be integrated at an angle over a grating coupler with high coupling efficiency and low optical feedback. With both coupling efficiency and feedback decreasing with increasing angle, there is a trade-off. With co-directional coupling, first-order diffraction loss sets in at a critical angle, which further reduces the coupling efficiency. No such critical angle exists for contra-directional coupling. We also experimentally demonstrate angled flip-chip integration of GaAs-based 850 nm single transverse and polarization mode VCSELs over grating couplers on a silicon-nitride PIC. At the output grating coupler, light is either collected by an optical fiber or converted to a photocurrent using a flip-chip integrated GaAs-based photodetector. The latter forms an on-PIC optical link. We measured an insertion loss of 21.9, 17.6 and 20.1 dB with a singlemode fiber, multimode fiber and photodetector over the output grating coupler, respectively.
|
|
| 7. |
- Chao, Lei, et al.
(författare)
-
Integration of Self-Adaptive Physical-Layer Key Distribution and Encryption in Optical Coherent Communication
- 2023
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 41:17, s. 5599-5606
-
Tidskriftsartikel (refereegranskat)abstract
- We propose and experimentally demonstrate a compatible physical-layer secure optical communication (PLSOC) system that integrates self-adaptive physical-layer key distribution (PLKD) and encryption (PLE) in optical coherent communication. Based on bit error rate difference of QAM signals mapped by asymmetric basis state Y-00 protocol, the secret key can be secretly exchanged over public fiber links without the pre-shared keys. Moreover, we perform a parameter self-adaptive strategy for practical and dynamic PLKD. The security of the key is evaluated in the case of a fiber-tapping attack. A secure hash algorithm, SHA3-512, is used to perform privacy amplification to obtain the virtually secure key. An error-free PLKD rate reaches 39.3 Kbits/s over 300km ultra-low loss fiber. We experimentally enable the integration of the proposed PLKD scheme and quantum noise stream cipher (QNSC) with a single wavelength, same system. Q factor penalty of the integration system compared to the QNSC system is 3.7dB (optical back-to-back) and 4.8dB (300km) respectively. By exploiting a common hardware platform, with the same wavelength, the proposed PLSOC system addresses the problem that PLKD and PLE are separately performed through independent optical fiber links or wavelengths. Since only digital signal processing is used, the scheme does not require extra hardware.
|
|
| 8. |
- Furdek Prekratic, Marija, 1985, et al.
(författare)
-
Guest Editorial Photonic Networks and Devices
- 2019
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 37:16, s. 3872-3874
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 9. |
- Grabowski, Alexander, 1993, et al.
(författare)
-
Large-Signal Equivalent Circuit for Datacom VCSELs
- 2021
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 39:10, s. 3225-3236
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing the baud rate in optical interconnects (OIs) will require the use of more sophisticated driver and receiver electronics. This will help overcome the stagnated bandwidth of the Vertical-Cavity Surface-Emitting Laser (VCSEL) and the pin-photodetector. Next generation OIs operating at single lane rates of 50+ Gbaud will therefore require careful co-optimization of the electronics and the optoelectronics. To facilitate this work there is a need of an accurate equivalent circuit for the optoelectronic components, functioning over a broad drive current and ambient temperature range. The VCSEL is the most important and complex to model due to its non-linear behavior and strongly varying characteristics with drive current and ambient temperature. For this purpose, a large-signal equivalent circuit dedicated for high-speed datacom VCSELs has been developed and is presented here. The distributed electrical parasitics in the device layout are carefully considered, the intrinsic speed limitation from carrier transport effects in the Separate-Confinement-Heterostructure (SCH) and the carrier-photon interaction in the Quantum Wells (QWs) are included, and self-heating effects in the device are monitored. The circuit is purposely based on physical instead of empirical models so that it can provide usable feedback to VCSEL designers. For circuit demonstration, it is implemented in Keysight's Advanced Design System (ADS) software and thereafter applied to replicate the performance of a state-of-the-art 28-GHz-bandwidth VCSEL at different temperatures and drive currents. Comparison is made between simulated and measured steady-state characteristics, small-signal behavior, and large-signal response under 28 Gbaud On-Off-Keying (OOK) and Pulse-Amplitude-Modulation 4 (PAM4) modulation, showing good agreement.
|
|
| 10. |
- Grabowski, Alexander, 1993, et al.
(författare)
-
Large-Signal Equivalent Circuit for Datacom VCSELs – Including Intensity Noise
- 2022
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; , s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- Optical interconnects (OIs) continue to require more and more sophisticated driver and receiver electronics as higher baud rates are pushed in datacom, mainly due to the bandwidth stagnation of the optoelectronic components such as the vertical-cavity surface-emitting laser (VCSEL) in the transmitter as well as the photodetector (PD) in the receiver. Another important focus is maintaining high energy efficiency for the OIs. For both cases, a reliable equivalent circuit model for high-speed VCSELs is required for link optimization. This work is an extension of our previously presented large-signal VCSEL equivalent circuit model, where noise is added to the physical processes that the VCSEL model is based on. Thus, a new step is taken in the strive of developing an even more accurate physics-based large-signal VCSEL equivalent circuit model for datacom applications. Following a detailed description of the VCSEL noise modelling, a presentation is given on simulated results of VCSEL relative intensity noise (RIN) spectrum and eye diagrams under 28 Gbaud on-off keying (OOK) and pulse-amplitude 4 (PAM4) modulation, and that are compared with corresponding measurement results. Good agreement is found over a wide range of VCSEL driving conditions and temperatures. A 28-GHz-bandwidth VCSEL is applied for the demonstration, and the presented noise extended VCSEL equivalent circuit model was implemented in Verilog-A, and the simulations were performed using Cadence Spectre.
|
|
