| 1. |
- Airiskallio, E., et al.
(författare)
-
Third element effect in the surface zone of Fe-Cr-Al alloys
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- The third element effect to improve the high temperature corrosion resistance of the low-Al Fe-Cr-Al alloys is suggested to involve a mechanism that boosts the recovering of the Al concentration to the required level in the Al-depleted zone beneath the oxide layer. We propose that the key factor in this mechanism is the coexistent Cr depletion that helps to maintain a sufficient Al content in the depleted zone. Several previous experiments related to our study support that conditions for such a mechanism to be functional prevail in real oxidation processes of Fe-Cr-Al alloys.
|
|
| 2. |
- Airiskallio, E., et al.
(författare)
-
Tuning the surface chemistry of Fe-Cr by V doping
- 2009
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 80:15
-
Tidskriftsartikel (refereegranskat)abstract
- The reversal of the magnitudes of the bulk and surface chemical-potential differences induces the outburst of Cr on the otherwise pure Fe surface of Fe-Cr alloys. This threshold value for the Cr content is about 10 at. %. It is found that vanadium addition to Fe-Cr shifts the Cr threshold to a substantially lower value suggesting V having a positive effect on the corrosion resistance of low Cr steels. The obtained shift in the Cr threshold is shown to be connected to the change in volume of the alloy.
|
|
| 3. |
- Delczeg-Czirjak, Erna, et al.
(författare)
-
Effect of long-range order on elastic properties of Pd(0.5)Ag(0.5) alloy from first principles
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 84:9, s. 094205-
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of long-range order on single-crystal elastic constants of Pd(0.5)Ag(0.5) alloy has been investigated using first-principles electronic structure calculations. The lowest energy among the considered ordered, partially ordered, and disordered structures is found to be the L1(1) layered structure, which is formed by alternate (111) Pd and Ag layers. The ordering effect is found to follow a clear trend: in contrast to the disordered phase, for which the K(a) and K(c) compressibilities are equal, the L1(1) structure becomes less compressible along the c axis than along the a axis.
|
|
| 4. |
- Delczeg-Czirjak, Erna Krisztina, 1978-, et al.
(författare)
-
Ab initio study of the elastic anomalies in Pd-Ag alloys
- 2009
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 79
-
Tidskriftsartikel (refereegranskat)abstract
- Ab initio total-energy calculations, based on the exact muffin-tin orbital method, are used to determine the elastic properties of Pd1-xAgx random alloys in the face-centered-cubic crystallographic phase. The compositional disorder is treated within the coherent-potential approximation. The single crystal and polycrystalline elastic constants and the Debye temperature are calculated for the whole range of concentration, 0 <= x <= 1. It is shown that the variation in the elastic parameters of Pd-Ag alloys with chemical composition strongly deviates from a simple linear or parabolic trend. The complex electronic origin of these anomalies is demonstrated.
|
|
| 5. |
- Kuronen, A., et al.
(författare)
-
Segregation, precipitation, and alpha-alpha ' phase separation in Fe-Cr alloys
- 2015
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 92:21
-
Tidskriftsartikel (refereegranskat)abstract
- Iron-chromium alloys, the base components of various stainless steel grades, have numerous technologically and scientifically interesting properties. However, these features are not yet sufficiently understood to allow their full exploitation in technological applications. In this work, we investigate segregation, precipitation, and phase separation in Fe-Cr systems analyzing the physical mechanisms behind the observed phenomena. To get a comprehensive picture of Fe-Cr alloys as a function of composition, temperature, and time the present investigation combines Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods have to be used. Using the exact muffin-tin orbitals method with the coherent potential approximation (CPA-EMTO) the effective chemical potential as a function of Cr content (0-15 at. % Cr) is calculated for a surface, second atomic layer, and bulk. At similar to 10 at. % Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr-containing surfaces are expected when the Cr content exceeds similar to 10 at. %. The second atomic layer forms about a 0.3 eV barrier for the migration of Cr atoms between the bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. However, for Cr concentration regions less than 10 at. %, the ab initio (CPA-EMTO) result of the important role of the second atomic layer to the surface is not reproducible from the large-scale Monte Carlo molecular dynamics (MCMD) simulation. On the other hand, for the nominal concentration of Cr larger than 10 at. % the MCMD simulations show the precipitation of Cr into isolated pockets in bulk Fe-Cr and the existence of the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer systems. For high Cr concentration alloys the performed spectroscopic measurements support the MCMD simulations. Hard x-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in the Fe/Cr double layer and Fe0.95Cr0.05 and Fe0.85Cr0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10(-8) Torr pressure of the spectrometers showing intense Cr2O3 signal. Cr segregation and the formation of Cr-rich precipitates were traced by analyzing the experimental atomic concentrations and chemical shifts with respect to annealing time, Cr content, and kinetic energy of the exited electron.
|
|
| 6. |
- Kuzmin, M., et al.
(författare)
-
Dimer-T(3) reconstruction of the Sm/Si(100)(2 x 3) surface studied by high-resolution photoelectron spectroscopy and density functional theory calculations
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 84:24, s. 245322-
-
Tidskriftsartikel (refereegranskat)abstract
- Silicon dimer-containing reconstructions on Si(100) can be induced by submonolayer amounts of rare earth (RE) metals. The tilt of dimer bonds in such reconstructions can be controlled by the coverage and electronic properties of RE adsorbates. In this study, we have utilized improved high-resolution photoelectron spectroscopy with the synchrotron radiation and density functional theory (DFT) calculations to exploit the structural and electronic properties of the Sm/Si(100)(2 x 3) system. A careful analysis of photoelectron spectra, in combination with DFT calculations of surface core-level shifts for silicon atoms in energetically plausible structural models, has allowed us to establish the favorable atomic configuration of Sm/Si(100)(2 x 3) with a buckled Si dimer and to explain characteristic features of Si 2p line shape in detail. It is shown that the dimer buckling leads to a significant core-level binding-energy splitting of the first-layer Si atoms, affecting the lower-binding-energy region of Si 2p spectra drastically. An interpretation of the Si 2p line shape for RE/Si(100)(2 x 3) that is based on combined initial state and complete screening data is suggested. The mechanism underlying the buckling and symmetrization of silicon dimers in RE/Si(100) reconstructions is discussed.
|
|
| 7. |
- Kuzmin, M., et al.
(författare)
-
Surface core-level shifts on Ge(111)c(2 x 8) : Experiment and theory
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 83:24, s. 245319-
-
Tidskriftsartikel (refereegranskat)abstract
- Combining high-resolution photoelectron spectroscopy and density functional theory (DFT) calculations, 3d photoemission line shape and surface core-level shifts have been reinvestigated on the Ge(111)c(2 x 8) surface. It is found that 3d spectra include, in addition to the bulk and three surface-shifted components reported in literature, a component that was not identified in earlier measurements with a lower resolution. The detailed interpretation of these spectra and their line shape is made on the basis of DFT calculations. It is shown that the lowest binding energy component is due to the rest atoms. The higher binding energy emission is caused by the adatoms and the third-layer atoms that are below the adatoms. Finally, the two other surface components originate from the first- and second-layer atoms. The screening effects in the Ge(111)c(2 x 8) are discussed.
|
|
| 8. |
- Lang, J. J. K., et al.
(författare)
-
Ab initio and scanning tunneling microscopy study of an indium-terminated GaAs(100) surface : An indium-induced surface reconstruction change in the c(8x2) structure
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 81:24, s. 245305-
-
Tidskriftsartikel (refereegranskat)abstract
- Technologically useful indium- (In) terminated c(8 x 2)-reconstructed GaAs(100) substrate surface has been studied by first-principles calculations and scanning tunneling microscopy (STM) measurements. Our total-energy calculations demonstrate the stability of four different so-called zeta a structures with In monomer rows and In coverage between 0.5 and 2 monolayers on the GaAs(100) substrate. Thus, we introduce a surface system, which stabilizes the zeta a reconstruction. Furthermore, an interesting trend is found. Atomic structure of the c(8 x 2) reconstruction depends on the surface-layer cation and substrate volumes, which, in principle, allows to tune the surface structure by cation adsorption. This phenomenon is related to the peculiar c(8 x 2) atomic surface structure, which shows mixed surface layer, including both anions and cations, and uncommon metallic-type cations in the zeta a structure, which do not show covalent bonds. Our results predict a structural transition from the zeta structure to the zeta a structure as the surface cation size is increased at 0 K. The found transition is probably related to the disordered surface structures (consisting of zeta and zeta a building blocks) found experimentally by x-ray diffraction at room temperature. Comparison of the STM images, calculated for various c(8 x 2) models, with the former and present measured STM images of In/GaAs(100) c(8 x 2) supports the presence of stable zeta a reconstructions.
|
|
| 9. |
- Lang, J. J. K., et al.
(författare)
-
Unveiling and controlling the electronic structure of oxidized semiconductor surfaces: Crystalline oxidized InSb(100)(1 x 2)-O
- 2014
-
Ingår i: Physical Review B (Condensed Matter and Materials Physics). - 1098-0121. ; 90:4
-
Tidskriftsartikel (refereegranskat)abstract
- The exothermic nature of oxidation causes nearly all semiconductor applications in various fields like electronics, medicine, photonics, and sensor technology to acquire an oxidized semiconductor surface part during the application manufacturing. The significance of understanding and controlling the atomic scale properties of oxidized semiconductor surfaces is expected to increase even further with the development of nanoscale semiconductor crystals. The nature of oxidized semiconductor layers is, however, hard to predict and characterize as they are usually buried and amorphous. To shed light on these issues, we pursue a different approach based on oxidized III-V semiconductor layers that are crystalline. We present a comprehensive characterization of oxidized crystalline InSb(100)(1 x 2)-O layers by ab initio calculations, photoelectron spectroscopy, scanning tunneling microscopy, and spectroscopy, and demonstrate the electronic band structures of different oxidized phases of the semiconductor, which elucidate the previous contradictory semiconductor-oxidation effects. At 0.5 monolayer (ML) oxidation, oxygen atoms tend to occupy subsurface Sb sites, leading to metallic states in the semiconductor band gap, which arise from top dimers. When the oxidation is increased to the 1.0-2.0 ML concentration, oxygen occupies also interstitial sites, and the insulating band structure without gap states is stabilized with unusual occupied In dangling bonds. In contrast, the 2.5-3.0 ML oxide phases undergo significant changes toward a less ordered structure. The findings suggest a methodology for manipulating the electronic structure of oxidized semiconductor layers.
|
|
| 10. |
- Laukkanen, P., et al.
(författare)
-
Bismuth-stabilized c(2X6) reconstruction on a InSb(100) substrate : Violation of the electron counting model
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X .- 2469-9950 .- 2469-9969. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- By means of scanning tunneling microscopy/spectroscopy (STM/STS), photoelectron spectroscopy, and first-principles calculations, we have studied the bismuth (Bi) adsorbate-stabilized InSb(100) substrate surface which shows a c(2X6) low-energy electron diffraction pattern [thus labeled Bi/InSb(100)c(2X6) surface] and which includes areas with metallic STS curves as well as areas with semiconducting STS curves. The first-principles phase diagram of the Bi/InSb(100) surface demonstrates the presence of the Bi-stabilized metallic c(2X6) reconstruction and semiconducting (4X3) reconstruction depending on the chemical potentials, in good agreement with STS results. The existence of the metallic c(2X6) phase, which does not obey the electron counting model, is attributed to the partial prohibition of the relaxation in the direction perpendicular to dimer rows in the competing reconstructions and the peculiar stability of the Bi-stabilized dimer rows. Based on (i) first-principles phase diagram, (ii) STS results, and (iii) comparison of the measured and calculated STM and photoemission data, we show that the measured Bi/InSb(100)c(2X6) surface includes metallic areas with the stable c(2X6) atomic structure and semiconducting areas with the stable (4X3) atomic structure.
|
|
