| 1. |
- Abrahamsson, Maria, 1975, et al.
(författare)
-
High Extinction Coefficient Ru-Sensitizers that Promote Hole Transfer on Nanocrystalline TiO2
- 2014
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-7641 .- 1439-4235. ; 15:6, s. 1154-1163
-
Tidskriftsartikel (refereegranskat)abstract
- Two series of Ru-II polypyridyl compounds with formulas [(bpy)(2)RuL](PF6)(2) and [(deeb)(2)RuL](PF6)(2), where bpy is 2,2-bipyridine, deeb is 4,4-diethylester-2,2-bpy, and L is one of several substituted 9-(1,3-dithiole-2-ylidene)-4,5-diazafluorene ligands, were studied as potential photosensitizers for TiO2. These compounds possess notably high extinction coefficients (40000M(-1)cm(-1) @470 nm) which are shown by time-dependent density functional theory (TD-DFT) calculations to result from overlapping metal-to-ligand charge transfer (MLCT) and ligand-localized transitions. Low-temperature absorption and photoluminescence measurements were suggestive of a short-lived MLCT excited state. When adsorbed onto TiO2 thin films, both the free ligands (L) and their corresponding [(deeb)(2)RuL](2+) complexes exhibited rapid excited-state electron injection into TiO2; in the case of the complexes, this was followed by rapid (k>10(8) s(-1)) hole transfer from Ru-III to the 1,3-dithiole ring of the L ligand. Observation of diffusion-limited reductive quenching of the [Ru(bpz)(3)](2+)* (bpz is 2,2-bipyrazine) excited state by the L ligands in solution supported the occurrence of intramolecular hole transfer following electron injection by the TiO2-anchored complexes.
|
|
| 2. |
- Ahmed, Mukhtiar, et al.
(författare)
-
Pyrrolidium- and Imidazolium-Based Ionic Liquids and Electrolytes with Flexible Oligoether Anions
- 2024
-
Ingår i: ChemPhysChem. - : John Wiley & Sons. - 1439-7641 .- 1439-4235. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- A new class of fluorine-free ionic liquids (ILs) and electrolytes based on aliphatic flexible oligoether anions, 2-(2-methoxyethoxy)acetate (MEA) and 2-[2-(2-methoxyethoxy)ethoxy]acetate (MEEA), coupled with pyrrolidinium and imidazolium cations is introduced. For the ILs with MEEA anions, Li+ conducting electrolytes are created by doping the ILs with 30 mol % of LiMEEA. The structural flexibility of the oligoether functionality in the anion results in glass transition temperatures (Tg) as low as −60 °C for the neat ILs and the electrolytes. The imidazolium-based ILs and electrolytes reveal better thermal stabilities but higher Tg and lower electrochemical stabilities than the corresponding pyrrolidinium-based analogues. All neat ILs show comparable transport properties for the cations and these decrease by the addition of lithium salt – the pyrrolidinium-based electrolyte being affected the most.
|
|
| 3. |
|
|
| 4. |
- Alipour, Mohammad, et al.
(författare)
-
Improved Battery Cycle Life Prediction Using a Hybrid Data-Driven Model Incorporating Linear Support Vector Regression and Gaussian
- 2022
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 23:7
-
Tidskriftsartikel (refereegranskat)abstract
- The ability to accurately predict lithium-ion battery life-time already at an early stage of battery usage is critical for ensuring safe operation, accelerating technology development, and enabling battery second-life applications. Many models are unable to effectively predict battery life-time at early cycles due to the complex and nonlinear degrading behavior of lithium-ion batteries. In this study, two hybrid data-driven models, incorporating a traditional linear support vector regression (LSVR) and a Gaussian process regression (GPR), were developed to estimate battery life-time at an early stage, before more severe capacity fading, utilizing a data set of 124 battery cells with lifetimes ranging from 150 to 2300 cycles. Two type of hybrid models, here denoted as A and B, were proposed. For each of the models, we achieved 1.1 % (A) and 1.4 % (B) training error, and similarly, 8.3 % (A) and 8.2 % (B) test error. The two key advantages are that the error percentage is kept below 10 % and that very low error values for the training and test sets were observed when utilizing data from only the first 100 cycles.The proposed method thus appears highly promising for predicting battery life during early cycles.
|
|
| 5. |
- Almeida, Roseley, et al.
(författare)
-
Theoretical Evidence behind Bifunctional Catalytic Activity in Pristine and Functionalized Al2C Monolayers
- 2018
-
Ingår i: ChemPhysChem. - : Wiley-VCH Verlagsgesellschaft. - 1439-4235 .- 1439-7641. ; 19:1, s. 148-152
-
Tidskriftsartikel (refereegranskat)abstract
- First principles electronic structure calculations based on the density functional theory (DFT) framework are performed to investigate hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) on two-dimensional Al2C monolayers. In addition to the pristine Al2C monolayer, monolayers doped with Nitrogen (N), Phosphorous (P), Boron (B), and Sulphur (S) are also investigated. After determining the individual adsorption energy of hydrogen and oxygen on the different functionalized Al2C monolayers, the adsorption free energies are predicted for each of the functionalized monolayers in order to assess their suitability for HER or OER. The density of states and optical absorption spectra calculations along with the work function of the functionalized Al2C monolayers enable us to gain a profound understanding of the electronic structure for the individual system and their relation to the water splitting mechanism.
|
|
| 6. |
- Alvelid, Jonatan, et al.
(författare)
-
Far Red‐Shifted CdTe Quantum Dots for Multicolour Stimulated Emission Depletion Nanoscopy
- 2022
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 24:3
-
Tidskriftsartikel (refereegranskat)abstract
- Stimulated emission depletion (STED) nanoscopy is a widely used nanoscopy technique. Two-colour STED imaging in fixed and living cells is standardised today utilising both fluorescent dyes and fluorescent proteins. Solutions to image additional colours have been demonstrated using spectral unmixing, photobleaching steps, or long-Stokes-shift dyes. However, these approaches often compromise speed, spatial resolution, and image quality, and increase complexity. Here, we present multicolour STED nanoscopy with far red-shifted semiconductor CdTe quantum dots (QDs). STED imaging of the QDs is optimized to minimize blinking effects and maximize the number of detected photons. The far-red and compact emission spectra of the investigated QDs free spectral space for the simultaneous use of fluorescent dyes, enabling straightforward three-colour STED imaging with a single depletion beam. We use our method to study the internalization of QDs in cells, opening up the way for future super-resolution studies of particle uptake and internalization.
|
|
| 7. |
- Andersson, Magnus, et al.
(författare)
-
Physical Properties of Biopolymers Assessed by Optical Tweezers : Analysis of folding and refolding of bacterial pili
- 2008
-
Ingår i: ChemPhysChem. - : Wiley-VCH Verlagsgesellschaft. - 1439-4235 .- 1439-7641. ; 9:2, s. 221-235
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial adhesion to surfaces mediated by specific adhesion organelles that promote infections, as exemplified by the pili of uropathogenic E. coli, is studied mostly at the level of cell-cell interactions and thereby reflects the averaged behavior of multiple pili. The role of pilus rod structure has therefore only been estimated from the outcome of experiments involving large numbers of organelles at the same time. It has, however, lately become clear that the biomechanical behavior of the pilus shafts play an important, albeit hitherto rather unrecognized, role in the adhesion process. For example, it has been observed that shafts from two different strains, even though they are similar in structure, result in large differences in the ability of the bacteria to adhere to their host tissue. However, in order to identify all properties of pilus structures that are of importance in the adhesion process, the biomechanical properties of pili must be assessed at the single-molecule level. Due to the low range of forces of these structures, until recently it was not possible to obtain such information. However, with the development of force-measuring optical tweezers (FMOT) with force resolution in the low piconewton range, it has lately become possible to assess forces mediated by individual pili on single living bacteria in real time. FMOT allows for a more or less detailed mapping of the biomechanical properties of individual pilus shafts, in particular those that are associated with their elongation and contraction under stress. This Mi- nireview presents the FMOT technique, the biological model system, and results from assessment of the biomechanical properties of bacterial pili. The information retrieved is also compared with that obtained by atomic force microscopy.
|
|
| 8. |
- Andersson, Per Ola, et al.
(författare)
-
A Novel ATR-FTIR Approach for Characterisation and Identification of Ex Situ Immobilised Species
- 2007
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 8:5, s. 712-722
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a novel method to analyse ex situ prepared protein chips by attenuated total reflection Fourier IR spectroscopy (ATR-FTIR), which circumvents tedious functionalisation steps of internal reflection elements (IREs), and simultaneously allows for complementary measurements by other analytical techniques. This concept is proven by utilising immobilised metal affinity capture (IMACTM) chips containing about 10 m thick films of copolymers coated with nitrilotriacetic acid (NTA) groups, which originally was manufactured for surface enhanced laser desorption ionisation (SELDI) spectrometry. Three immobilisation steps were analysed by ATR-FTIR spectroscopy: 1) NTA complexation with nickel(II) ions 2) binding of two histidine (His)-tagged synthetic peptides of 25 (25-His6) and 48 (48-His6) amino acids to the NTA-groups and 3) attachment of a ligand, mesyl amide, to the surface-bound 48-His6. Despite interference from H2O, both amide I and II were well resolved. Utilising peptide adsorption in the thick copolymer matrix yields a high saturation peptide concentration of 100 mg mL-1 and a dissociation constant of 116±11 M, as determined by a detailed analysis of the Langmuir adsorption isotherm. The mesyl amide ligand was directly seen in the raw ATR-FTIR spectrum with specific peaks in the fingerprint region at 1172 and 1350 cm-1. Several aspects of the fine structure of the amide I band of the peptide were analysed: influences from secondary structure, amino side chains and competing contamination product. We believe that this approach has great potential as a stand-alone or complementary analytical tool for determination of the chemical composition of functionalised surfaces. We emphasise further that with this approach no chemical treatment of IREs is needed; the chips can be regenerated and reused, and applied in other experimental set-ups.
|
|
| 9. |
- Andrejic, Milica, et al.
(författare)
-
Coupled-Cluster Interaction Energies for 200-Atom Host-Guest Systems
- 2014
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-7641 .- 1439-4235. ; 15:15, s. 3270-3281
-
Tidskriftsartikel (refereegranskat)abstract
- We have developed a method to calculate interaction energies of large systems (such as host-guest or even protein-ligand systems) at the local coupled-cluster with singles, doubles, and perturbative triples level, and with extrapolation to the limit of a complete basis set. The method is based on the polarizable multipole interactions with supermolecular pairs molecular fractionation approach, which combines a pairwise quantum-mechanical evaluation of the short-range interactions with a polarizable multipole treatment of many-body effects. The method is tested for nine guest molecules binding to an octa-acid host (in total 198-207 atoms), as part of the SAMPL4 blind challenge. From the test calculations, the accuracy of the approach is found to be 10 kJ mol(-1) or better. Comparison with dispersion-corrected density functional theory reveals that the latter underestimates the dispersion contribution for this type of system, which leads to a difference in the ranking of the ligands.
|
|
| 10. |
- Anoshkin, Ilya, et al.
(författare)
-
Coronene Encapsulation in Single-Walled Carbon Nanotubes : Stacked Columns, Peapods, and Nanoribbons
- 2014
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 15:8, s. 1660-1665
-
Tidskriftsartikel (refereegranskat)abstract
- Encapsulation of coronene inside single-walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45-608) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen-terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.
|
|
