| 1. |
- Blomqvist, Stefan, 1988-, et al.
(författare)
-
Analyzing the performance and control of a hydronic pavement system in a district heating network
- 2019
-
Ingår i: Energies. - Basel : MDPI. - 1996-1073. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- A hydronic pavement system (HPS) is an alternative method to clear snow and ice, which avoids the use of salt, sand, and fossil fuel in conventional snow clearance, and minimizes the risk of accidents. The aim is to analyze the performance of different control strategies for a 35,000 m2 HPS utilizing heat from a district heating and cooling (DHC) system. The key performance indicators are (1) energy performance of the HPS, and (2) primary energy use, (3) electricity production and (4) greenhouse gas (GHG) emissions from the DHC system. The methodology uses a simulation model of the HPS and an optimization model of the DHC system. Three operational strategies are analyzed: A reference scenario based on the current control strategy, and scenarios where the HPS is shut down at temperatures below −10 ◦C and −5 ◦C. The study shows that the DHC return temperature is suitable for use. By operational strategies, use during peak demand in the DHC system can be avoided, resulting in reduced use of fossil fuel. Moreover, the energy use of the HPS could be reduced by 10% and the local GHG emissions by 25%. The study emphasizes that the HPS may have positive effects on global GHG emissions, as it enables electricity production from renewable resources.
|
|
| 2. |
- Gustafsson, Mattias, et al.
(författare)
-
Rev-Changes in Primary Energy Use and CO2 Emissions : An Impact Assessment for a Building with Focus on the Swedish Proposal for Nearly Zero Energy Buildings
- 2017
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 10:7
-
Tidskriftsartikel (refereegranskat)abstract
- In the European Union's Energy Performance of Buildings Directive, the energy efficiency goal for buildings is set in terms of primary energy use. In the proposal from the National Board of Housing, Building, and Planning, for nearly zero energy buildings in Sweden, the use of primary energy is expressed as a primary energy number calculated with given primary energy factors. In this article, a multi-dwelling building is simulated and the difference in the primary energy number is investigated when the building uses heat from district heating systems or from heat pumps, alone or combined with solar thermal or solar photovoltaic systems. It is also investigated how the global CO2 emissions are influenced by the different energy system combinations and with different fuels used. It is concluded that the calculated primary energy number is lower for heat pump systems, but the global CO2 emissions are lowest when district heating uses mostly biofuels and is combined with solar PV systems. The difference is up to 140 tonnes/year. If the aim with the Swedish building code is to decrease the global CO2 emissions then the ratio between the primary energy factors for electricity and heat should be larger than three and considerably higher than today.
|
|
| 3. |
- Lidberg, Tina, 1982-, et al.
(författare)
-
Impact of Domestic Hot Water Systems on District Heating Temperatures
- 2019
-
Ingår i: Energies. - Basel, Schweiz : MDPI AG. - 1996-1073. ; 12:24
-
Tidskriftsartikel (refereegranskat)abstract
- When buildings become more energy effective, the temperature levels of district heating systems need to be lower to decrease the losses from the distribution system and to keep district heating a competitive alternative on the heating market. For this reason, buildings that are refurbished need to be adapted to suit low-temperature district heating. The aim of this paper is to examine whether four different energy refurbishment packages (ERPs) can be used for lowering the temperature need of a multi-family buildings space heating and domestic hot water (DHW) system as well as to analyse the impact of the DHW circulation system on the return temperature. The results show that for all ERPs examined in this study, the space heating supply temperature agreed well with the temperature levels of a low-temperature district heating system. The results show that the temperature need of the DHW system will determine the supply temperature of the district heating system. In addition, the amount of days with heating demand decreases for all ERPs, which further increases the influence of the DHW system on the district heating system. In conclusion, the DHW system needs to be improved to enable the temperature levels of a low-temperature district heating system.
|
|
| 4. |
- Rosén, Tommy, et al.
(författare)
-
Active Management of Heat Customers Towards Lower District Heating Return Water Temperature
- 2019
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 12:10
-
Tidskriftsartikel (refereegranskat)abstract
- The traditional way of managing the supply and return water temperatures in a district heating system (DHS) is by controlling the supply water temperature. The return water temperature then becomes a passive result that reflects the overall energy efficiency of the DHS. A DHS with many poorly functioning district heating centrals will create a high return water temperature, and the energy efficiency of the DHS will be affected negatively in several ways (e.g., lower efficiency of the flue gas condenser, higher heat losses in pipes, and lower electricity production for a DHS with combined heat and power (CHP)). With a strategic introduction of low-grade heat customers, the return water temperature can be lowered and, to some extent, controlled. With the heat customers connected in parallel, which is the traditional setup, return water temperatures can only be lowered at the same rate as the heat customers are improved. The active management of some customers can lower the return water temperatures faster and, in the long run, lead to better controlled return water temperatures. Active management is defined here as an adjustment of a domestic heating system in order to improve DHS efficiency without affecting the heating service for the individual building. The opposite can be described as passive management, where heat customers are connected to the DHS in a standardized manner, without taking the overall DHS efficiency into consideration. The case study in this article shows possible efficiency gains for the examined DHS at around 7%. Looking at fuel use, there is a large reduction for oil, with 10-30% reduction depending on the case in question, while the reduction is shown to be largest for the case with the lowest return water temperature. The results also show that efficiency gains will increase electricity production by about 1-3%, and that greenhouse gas (GHG) emissions are reduced by 4-20%.
|
|
| 5. |
- Rosén, Tommy, 1978-, et al.
(författare)
-
System Perspective on Biogas Use for Transport and Electricity Production
- 2019
-
Ingår i: Energies. - Basel : MDPI. - 1996-1073. ; 12:21
-
Tidskriftsartikel (refereegranskat)abstract
- Linköping municipality has managed biogas driven buses in the regional transport system since 1997 and all buses in the municipality have run on biogas since 2015. Biogas is a renewable fuel and by replacing fossil fuels it can help to lower net CO2 emissions. However, Internal Combustion Engines (ICE) in buses still have a rather low efficiency, in the range of 15–30%. If the combustion of biogas instead takes place in a combined cycle gas turbine (CCGT) efficiency could be higher and heat losses reduced. This could be a feasible solution if the transport system instead used electric buses charged with electricity generated by the CCGT. This article has a top-down perspective on the regional transport system and the regional district heating system (DHS) in Linköping municipality. Two alternative systems are compared regarding CO2 emissions, electricity production and component efficiencies. The first system that is studied is in operation today and uses locally produced biogas in the ICE buses. In parallel the combined heat and power (CHP) system delivers electricity and heat to households in the region. The second system that is studied is a system with electric buses and a CHP system that uses biogas in the CCGT to deliver electricity and heat to the regional power grid and DHS. The study shows that emissions would be reduced if biogas use is changed from use in ICE buses to use in the CCGT in the CHP-DHS. Improved biogas use could lower CO2-eq emissions by 2.4 million kg annually by using a better fuel-energy pathway.
|
|
