| 1. |
- Chen, Min, et al.
(författare)
-
Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation
- 2019
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- There has been an urgent need to eliminate toxic lead from the prevailing halide perovskite solar cells (PSCs), but the current lead-free PSCs are still plagued with the critical issues of low efficiency and poor stability. This is primarily due to their inadequate photovoltaic properties and chemical stability. Herein we demonstrate the use of the lead-free, all-inorganic cesium tin-germanium triiodide (CsSn(0.5)Ge(0.5)l(3)) solid-solution perovskite as the light absorber in PSCs, delivering promising efficiency of up to 7.11%. More importantly, these PSCs show very high stability, with less than 10% decay in efficiency after 500 h of continuous operation in N-2 atmosphere under one-sun illumination. The key to this striking performance of these PSCs is the formation of a full-coverage, stable native-oxide layer, which fully encapsulates and passivates the perovskite surfaces. The native-oxide passivation approach reported here represents an alternate avenue for boosting the efficiency and stability of lead-free PSCs.
|
|
| 2. |
- Liu, Zonghao, et al.
(författare)
-
Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules
- 2018
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Besides high efficiency, the stability and reproducibility of perovskite solar cells (PSCs) are also key for their commercialization. Herein, we report a simple perovskite formation method to fabricate perovskite films with thickness over 1 mu m in ambient condition on the basis of the fast gas-solid reaction of chlorine-incorporated hydrogen lead triiodide and methylamine gas. The resultant thick and smooth chlorine-incorporated perovskite films exhibit full coverage, improved crystallinity, low surface roughness and low thickness variation. The resultant PSCs achieve an average power conversion efficiency of 19.1 +/- 0.4% with good reproducibility. Meanwhile, this method enables an active area efficiency of 15.3% for 5 cmx 5 cm solar modules. The un-encapsulated PSCs exhibit an excellent T-80 lifetime exceeding 1600 h under continuous operation conditions in dry nitrogen environment.
|
|
| 3. |
- Paleti, Sri Harish Kumar, et al.
(författare)
-
Hexanary blends : a strategy towards thermally stable organic photovoltaics
- 2023
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells.
|
|
