| 1. |
- Dong, Zhihua, et al.
(författare)
-
Thermal spin fluctuations in CoCrFeMnNi high entropy alloy
- 2018
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- High entropy alloys based on 3d transition metals display rich and promising magnetic characteristics for various high-technology applications. Understanding their behavior at finite temperature is, however, limited by the incomplete experimental data for single-phase alloys. Here we use first-principles alloy theory to investigate the magnetic structure of polymorphic CoCrFeMnNi in the paramagnetic state by accounting for the longitudinal spin fluctuations (LSFs) as a function of temperature. In both face-centered cubic (fcc) and hexagonal close-packed (hcp) structures, the LSFs induce sizable magnetic moments for Co, Cr and Ni. The impact of LSFs is demonstrated on the phase stability, stacking fault energy and the fcc-hcp interfacial energy. The hcp phase is energetically preferable to the fcc one at cryogenic temperatures, which results in negative stacking fault energy at these conditions. With increasing temperature, the stacking fault energy increases, suppressing the formation of stacking faults and nano-twins. Our predictions are consistent with recent experimental findings.
|
|
| 2. |
- Huang, Shuo, et al.
(författare)
-
Phase-transition assisted mechanical behavior of TiZrHfTax high-entropy alloys
- 2018
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Recent developments of high-entropy alloys with high strength and high ductility draw attention to the metastability-engineering strategy. Using first-principle theory, here we demonstrate that reducing the Ta level in the refractory TiZrHfTax system destabilizes the body-centered cubic (bcc) phase and leads to the appearance of the hexagonal close-packed (hcp) phase embedded in the bcc matrix. The alloying-induced features of the elastic parameters for the cubic and hexagonal structures are mapped out in details, and strong sensitivity to the crystal lattice and chemistry is revealed. Results show softening of the bcc matrix with decreasing Ta concentration which ensures ductile behavior. However, the elastically nearly isotropic hcp precipitates possess enhanced resistance against shear which promotes strengthening of the TiZrHfTax dual-phase system. The present atomic-level insight provides strong evidence to the experimental observation, and emphasizes the significance of quantum-design for advanced multi-phase high-entropy alloys with excellent strength-ductility combinations.
|
|
| 3. |
- Kim, Dongyoo, et al.
(författare)
-
Tuned Magnetic Properties of L1(0)-MnGa/Co(001) Films by Epitaxial Strain
- 2016
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that the interface structure has a significant influence on the magnetic state of MnGa/Co films consisting of L1(0)-MnGa on face-centered-cubic Co(001) surface. We reveal an antiferromagnetic to ferromagnetic magnetization reversal as a function of the lateral lattice constant. The magnetization reversal mainly originates from localized states and weak hybridization at interface due to charge redistribution between muffin-tin spheres and interstitial region. The magnetic anisotropy energy of Mn/Co interface system is enhanced with increasing in-plane lattice constant, which is ascribed to the interface interactions and the above magnetization reversal.
|
|
| 4. |
- Lee, Jee-Yong, et al.
(författare)
-
The behaviour of stacking fault energy upon interstitial alloying
- 2017
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Stacking fault energy is one of key parameters for understanding the mechanical properties of face-centered cubic materials. It is well known that the plastic deformation mechanism is closely related to the size of stacking fault energy. Although alloying is a conventional method to modify the physical parameter, the underlying microscopic mechanisms are not yet clearly established. Here, we propose a simple model for determining the effect of interstitial alloying on the stacking fault energy. We derive a volumetric behaviour of stacking fault energy from the harmonic approximation to the energy-lattice curve and relate it to the contents of interstitials. The stacking fault energy is found to change linearly with the interstitial content in the usual low concentration domain. This is in good agreement with previously reported experimental and theoretical data.
|
|
| 5. |
- Li, Chun-Mei, et al.
(författare)
-
Physical mechanism of delta-delta '-epsilon phase stability in plutonium
- 2017
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Based on first-principle calculations, we have systematically explored the nature of the elastic stability and the delta-delta'-epsilon phase transitions in pure Pu at high temperature. It is found that, both the electronphonon coupling and the spin fluctuation effects tend to decrease the tetragonal elastic constant (C') of delta-Pu, accounting for its anomalous softening at high temperature. The lattice thermal expansion together with the electron-phonon coupling can stiffen C' of epsilon-Pu, promoting its mechanical stability at high temperature. The delta-epsilon transition is calculated to take place around 750-800 K, and is dominated by the phonon vibration. The delta' intermediate phase is realized around 750 K mainly because of the thermal spin fluctuation.
|
|
| 6. |
- Li, Xiaoqing, et al.
(författare)
-
Ab initio-predicted micro-mechanical performance of refractory high-entropy alloys
- 2015
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Recently developed high-entropy alloys (HEAs) consisting of multiple principal elements represent a new field of metallurgy and have demonstrated appealing properties for a wide range of applications. Using ab initio alloy theory, we reveal the alloying effect on the elastic properties and the ideal tensile strength (ITS) in the [001] direction of four body-centered cubic (bcc) refractory HEAs based on Zr, V, Ti, Nb, and Hf. We find that these HEAs show high elastic anisotropy and large positive Cauchy pressure, suggesting good extrinsic ductility. Starting from ZrNbHf, it is found that the ITS decreases with equimolar Ti addition. On the other hand, if both Ti and V are added to ZrNbHf, the ITS is enhanced by about 42%. An even more captivating effect is the ITS increase by about 170%, if Ti and V are substituted for Hf. The alloying effect on the ITS is explained by the d-band filling. An intrinsic brittle-to-ductile transition is found in terms of the failure mode under uniaxial tension. These investigations suggest that intrinsically ductile HEAs with high ideal strength can be achieved by controlling the proportion of group four elements to group five elements.
|
|
| 7. |
- Li, Xiaoqing, et al.
(författare)
-
First-principles investigation of the micromechanical properties of fcc-hcp polymorphic high-entropy alloys
- 2018
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- High-entropy alloys offer a promising alternative in several high-technology applications concerning functional, safety and health aspects. Many of these new alloys compete with traditional structural materials in terms of mechanical characteristics. Understanding and controlling their properties are of the outmost importance in order to find the best single-or multiphase solutions for specific uses. Here, we employ first-principles alloy theory to address the micro-mechanical properties of five polymorphic high-entropy alloys in their face-centered cubic (fcc) and hexagonal close-packed (hcp) phases. Using the calculated elastic parameters, we analyze the mechanical stability, elastic anisotropy, and reveal a strong correlation between the polycrystalline moduli and the average valence electron concentration. We investigate the ideal shear strength of two selected alloys under shear loading and show that the hcp phase possesses more than two times larger intrinsic strength than that of the fcc phase. The derived half-width of the dislocation core predicts a smaller Peierls barrier in the fcc phase confirming its increased ductility compared to the hcp one. The present theoretical findings explain a series of important observations made on dual-phase alloys and provide an atomic-level knowledge for an intelligent design of further high-entropy materials.
|
|
| 8. |
- Li, Xiaoqing, et al.
(författare)
-
Tensile strain-induced softening of iron at high temperature
- 2015
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomicspin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one gradually removes the magnetic long-range order by raising the temperature towards its Curie point of T-C(degrees) = 1043 K. Using first-principles theory, here we demonstrate that uniaxial tensile strain can also destabilise the magnetic order in iron and eventually lead to a ferromagnetic to paramagnetic transition at temperatures far below T-C(degrees). In consequence, the intrinsic strength of the ideal single-crystal body-centred cubic iron dramatically weakens above a critical temperature of similar to 500 K. The discovered strain-induced magneto-mechanical softening provides a plausible atomic-level mechanism behind the observed drop of the measured strength of Fe whiskers around 300-500 K. Alloying additions which have the capability to partially restore the magnetic order in the strained Fe lattice, push the critical temperature for the strength-softening scenario towards the magnetic transition temperature of the undeformed lattice. This can result in a surprisingly large alloying-driven strengthening effect at high temperature as illustrated here in the case of Fe-Co alloy.
|
|
| 9. |
- Lizarraga, Raquel, et al.
(författare)
-
First Principles Theory of the hcp-fcc Phase Transition in Cobalt
- 2017
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Identifying the forces that drive a phase transition is always challenging. The hcp-fcc phase transition that occurs in cobalt at similar to 700 K has not yet been fully understood, although early theoretical studies have suggested that magnetism plays a main role in the stabilization of the fcc phase at high temperatures. Here, we perform a first principles study of the free energies of these two phases, which we break into contributions arising from the vibration of the lattice, electronic and magnetic systems and volume expansion. Our analysis of the energy of the phases shows that magnetic effects alone cannot drive the fcc-hcp transition in Co and that the largest contribution to the stabilization of the fcc phase comes from the vibration of the ionic lattice. By including all the contributions to the free energy considered here we obtain a theoretical transition temperature of 825 K.
|
|
| 10. |
- Schönecker, Stephan, et al.
(författare)
-
Thermal surface free energy and stress of iron
- 2015
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Absolute values of surface energy and surface stress of solids are hardly accessible by experiment. Here, we investigate the temperature dependence of both parameters for the (001) and (110) surface facets of body-centered cubic Fe from first-principles modeling taking into account vibrational, electronic, and magnetic degrees of freedom. The monotonic decrease of the surface energies of both facets with increasing temperature is mostly due to lattice vibrations and magnetic disorder. The surface stresses exhibit nonmonotonic behaviors resulting in a strongly temperature dependent excess surface stress and surface stress anisotropy.
|
|
