| 1. |
- Alfredson, J.
(författare)
-
Individual differences in visual behaviour in simulated flight
- 2002
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 4662, s. 494-502
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Flying an aircraft is highly visually demanding. It is very important to map pilot visual behaviour, both for the purpose of evaluating the cockpit interface and to effectively integrate it with future adaptive interfaces and decision support systems. Pilots' visual behaviour was studied in two experiments. In the first experiment commercial aviation pilots were flying a commercial aviation scenario and eye point of gaze, and eye blinks were collected. In the second experiment military pilots were flying an air-to-air combat scenario and the visual behaviour was video recorded. In both of the experiments the results show individual differences in the pilots' visual behaviour. In the second experiment two different categories of eye blinks were found that might help explain the individual differences in visual behaviour. One category can be related to the systematic eye blinks found to occur when the eye point of gaze was changed between head-up/head-down and head-down/head-up. The other category could be related to other reasons, such as, mental workload or visual demands.
|
|
| 2. |
- Andersen, Torben, et al.
(författare)
-
A parallel integrated model of the Euro50
- 2004
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 5497:1, s. 251-265
-
Konferensbidrag (refereegranskat)abstract
- The Euro50 is an astronomical extremely large telescope for optical and infrared wavelength with a 50 m primary mirror. The telescope will have an elaborate control system ("live optics") to correct for atmospheric and telescope aberrations. To study and predict performance of the complete telescope system, an integrated model combining the structural model of the telescope, optics models, the control systems, and the adaptive optics has been established. Wind is taken into account on the basis of wind tunnel measurements and computer fluid dynamics calculations. Atmospheric aberrations are included using a seven-layer atmosphere model. The integrated model is written in Matlab and is run on a cluster computer to achieve acceptable execution times. Dedicated ordinary differential equation solvers have been written and a special toolkit for communication between Matlab processes on different nodes of the cluster computer has been set up. Preliminary results from the complete integrated model, including adaptive optics, are shown
|
|
| 3. |
- Andersen, Torben, et al.
(författare)
-
An integrated simulation model of the Euro50
- 2002
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 1996-756X .- 0277-786X. ; 4757, s. 84-92
-
Konferensbidrag (refereegranskat)abstract
- The Euro50 is a proposed optical telescope with an equivalent aperture of 50 m. It will have a segmented primary mirror and full adaptive optics. To study the interaction of the telescope structure, the control system and the optics, an integrated simulation model has been formulated. The mechanical model is a modal version of an Ansys finite element model. The optics model is based on ray tracing and physical optics. The segments model takes the alignment servos and the segment dynamics into account. Wind variation over the primary mirror is included. Segment control system modeling is in progress. First results clearly demonstrate that a good enclosure is needed to protect the telescope well against wind. The results also suggest that the segment alignment system must have a bandwidth well above the lowest eigenfrequencies of the telescope.
|
|
| 4. |
- Andersen, Torben, et al.
(författare)
-
Euro50
- 2003
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 1996-756X .- 0277-786X. ; 5382:1, s. 169-182
-
Konferensbidrag (refereegranskat)abstract
- The Euro50 is a telescope for optical and infrared wavelengths. It has an aspherical primary mirror with a size of 50 meters and 618 segments. The optical configuration is of Gregorian type and the secondary mirror is deformable for adaptive optics. Observations can take place in prime focus, Gregorian foci, and Nasmyth foci using additional relay mirrors. The telescope provides seeing limited observations, partial adaptive optics with ground layer correction, single conjugate adaptive optics and dual-conjugate adaptive optics. For prime focus observations, a clam-shell corrector with a doublet lens is used. The primary mirror segments can be polished using the precessions polishing technique. "Live Optics" denotes the joint segment alignment system, secondary mirror control system, adaptive optics and main axes servos. An overview is given of the live optics architecture, including feedback from wavefront sensors for natural and laser guide stars, and from primary mirror segment edge sensors. A straw man concept of the laser guide star system using sum-frequency YAG lasers is presented together with a solution to the laser guide star perspective elongation problem. The structural design involves a large steel structure and a tripod of carbon fiber reinforced polymer to support the secondary mirror. Integrated models have been set up to simulate telescope performance. Results show that an enclosure is needed to protect the telescope against wind during observations. The enclosure is very large box-shaped steel structure
|
|
| 5. |
- Andersen, Torben, et al.
(författare)
-
Integrated modeling of the Euro50
- 2003
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 5382:1, s. 366-378
-
Konferensbidrag (refereegranskat)abstract
- The Euro50 is a proposed 50 m optical and infrared telescope. It will have thousands of control loops to keep the optics aligned under influence of wind, gravity and thermal loads. Cross-disciplinary integrated modeling is used to study the overall performance of the Euro50. A sub-model of the mechanical structure originates from finite element modeling. The optical performance is determined using ray tracing, both non-linear and linearized. The primary mirror segment alignment control system is modeled with the 618 segments taken as rigid bodies. Adaptive optics is included using a layered model of the atmosphere and sub-models of the wavefront sensor, reconstructor and controller. The deformable mirror is, so far, described by a simple influence function and a second order dynamical transfer function but more detailed work is in progress. The model has been implemented using Matlab/Simulink on individual computers but it will shortly be implemented on a Beowulf cluster within a trusted network. Communication routines between Matlab on the cluster processors have been written and are being benchmarked. Representative results from the simulations are shown
|
|
| 6. |
- Andersen, Torben, et al.
(författare)
-
Status of the Euro50 project
- 2004
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 5489:1, s. 407-416
-
Konferensbidrag (refereegranskat)abstract
- The Euro50 is an extremely large telescope for optical and infrared wavelength with a 50 m primary mirror. It has a segmented, aspherical primary mirror and an aspherical, deformable secondary in a Gregorian layout. A tentative conceptual design exists and has been documented in a study report. Recent activities have concentrated on the science case for extremely large telescopes in the 50 m class and on identification of potential technical "show stoppers". The science case investigation has identified four fields of particular interest. The studies of critical technical issues have concentrated on atmospheric dispersion effects for high-resolution adaptive optics for extremely large telescopes, and on the influence of wind and other disturbances on wavefront control. Wind load on the telescope, the primary mirror and the enclosure has been studied using wind tunnel measurements and computational fluid dynamics. The impact of wind on the total system has been investigated using an integrated model that includes the telescope structure, the primary mirror segment alignment system, the secondary mirror alignment system, and single conjugate adaptive optics using the deformable secondary mirror. The first, tentative results show that wind disturbances may be significant and that the task of correcting for wind residuals may be at least as large for the adaptive optics system as that of correcting for atmospheric aberrations. The results suggest that use of extremely large telescopes for observations of earth-like planets around nearby stars may imply a considerable challenge
|
|
| 7. |
- Andersson-Engels, Stefan, et al.
(författare)
-
Integrated system for interstitial photodynamic therapy
- 2003
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 5142, s. 42-49
-
Konferensbidrag (refereegranskat)abstract
- A novel photodynamic therapy system based on interstitial illumination using multiple fibres is under development. The aim with this system is to enable treatment of large tumour volumes and also to utilise real-time measurements to allow on-line dosimetry. Important dosimetric parameters to measure are light fluence rate, sensitizer fluorescence intensity and local blood oxygenation. A construction which allows all functions to be readily performed with a single system is presented. We believe that interstitial PDT utilising this technique may be attractive in many clinical situations.
|
|
| 8. |
- Andersson-Engels, Stefan, et al.
(författare)
-
Integrated system for interstitial photodynamic therapy
- 2002
-
Ingår i: Advanced Optical Devices, Technologies, and Medical Applications. - : SPIE. - 0277-786X .- 1996-756X. ; 5123, s. 293-302
-
Konferensbidrag (refereegranskat)abstract
- To develop PDT beyond treatment of thin superficial tumours, to also be an efficient treatment alternative for deeply located and/or thick tumours, a system based on interstitial illumination using multiple fibres has been developed. Conditions that could benefit from such a treatment modality are for instance malignant brain tumours and tumours in the oral cavity. In interstitial PDT one needs to use multiple fibres for light delivery in order to allow treatments of tumours larger than a few millimetres in diameter. Our system consists of a laser light source, a beam-splitting system dividing the light into three or six output fibres and a custom-made dosimetry programme. The concept is then to use these fibres not only for delivering the treatment light but also to measure parameters of interest for the treatment outcome. The fluence rate of the light emitted by each fibre is measured at the positions of the other fibre tips. From these results the light dose at all positions could be recalculated. Changes in optical properties as well as bleaching and concentration of the photosensitizer during the treatment could be monitored and compensated for in the dosimetry. Tumours have been treated both in experimental studies and in patients with thick superficial Basal Cell Carcinomas. Almost all treated skin lesions responded with complete response.
|
|
| 9. |
- Andersson, I., et al.
(författare)
-
Increasing spatial resolution by using an image sequence
- 2001
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 4380, s. 542-551
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this paper we present two methods for increasing the spatial resolution of images using image sequences where all frames contain the same static scene with unknown shifts. Because of the subpixel shifts, aliased frequencies appear in a slightly different way in all images, making it possibly to reconstruct frequencies above the Nyqvist frequency, thus improving the resolution. To this end, we estimate parameters in the affine transform relating the images to each other from the sequence. To show the applicability of the algorithms, many experiments have been carried out mainly using image sequences captured by a TV-camera and not only using synthetic image sequences. The results from one TV-camera sequence are presented in this report. Measurements of PSF and MTF have been carried out and the results show that we can increase the spatial resolution by almost a factor of two. This technique can be used for target identification/recognition as well as for visualization. The second method (interpolation) is possible to implement in real time.
|
|
| 10. |
- Andersson, Mikael, et al.
(författare)
-
Modelling and Design of Admission Control Mechanisms for Web Servers using Non-linear Control Theory
- 2003
-
Ingår i: Performance and control of next-generation communication networks : [ITCom's Conference on Performance and Control of Next-Generation Communication Networks] ; 9 - 10 September 2003, Orlando, Florida, USA (SPIE proceedings series ; vol. 5244). - : SPIE. - 1996-756X .- 0277-786X. - 0819451274 ; 5244:1, s. 53-64
-
Konferensbidrag (refereegranskat)abstract
- Web sites are exposed to high rates of incoming requests. Since web sites are sensitive to overload, admission control mechanisms are often implemented. The purpose of such a mechanism is to prevent requests from entering the web server during high loads. This paper presents how admission control mechanisms can be designed and implemented with a combination of queueing theory and control theory. Since web servers behave non-linear and stochastic, queueing theory can be used for web server modelling. However, there are no mathematical tools in queueing theory to use when designing admission control mechanisms. Instead, control theory contains the needed mathematical tools. By analysing queueing systems with control theoretic methods, good admission control mechanisms can be designed for web server systems. In this paper we model an Apache web server as a GI/G/1-system. Then, we use control theory to design a PI-controller, commonly used in automatic control, for the web server. In the paper we describe the design of the controller and also how itcan be implemented in a real system. The controller has been implemented and tested together with the Apache web server. The server was placed in a laboratory network together with a traffic generator which was used to represent client requests. Measurements in the laboratory setup show how robust the implemented controller is, and how it correspond to the results from the theoretical analysis.
|
|
