SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "L773:0277 786X OR L773:1996 756X srt2:(2005-2009)"

Sökning: L773:0277 786X OR L773:1996 756X > (2005-2009)

  • Resultat 1-10 av 90
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Abrahamsson, Christoffer, et al. (författare)
  • Scatter correction of transmission NIR spectra by photon migration data - Quantitative analysis of solids
  • 2005
  • Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 1996-756X .- 0277-786X. ; 6009, s. 60090-60090
  • Konferensbidrag (refereegranskat)abstract
    • The scope of this presentation is a new methodology to correct conventional NIR data for scattering effects. The technique aims at measuring the absorption coefficient of the samples rather than the total attenuation, measured by conventional NIR spectroscopy. The main advantage of this is that the absorption coefficient is independent of the path length of the light inside the sample, and therefore independent of the scattering effects. The measurements in this work were made using a novel system for time-resolved measurements, based on short light continuum pulses generated in an index-guided crystal fibre and a spectrometer-equipped streak camera. The system enables spectral recordings in the wavelength range 500 - 1200 nm with a spectral resolution of 5 nm and a temporal resolution of 30 ps. The evaluation scheme is based on modeling of light transport by diffusion theory, that provides an independent measure of the scattering properties of the samples, that later is used to correct conventional NIR data. This yields a clear advantage over other pre-processing techniques, where scattering effects are estimated and corrected for by using the shape of the measured spectrum only. PLS calibration models shows that, by using the proposed evaluation scheme, the predictive ability is improved by 50% as compared to models based on conventional NIR data. The method also makes it possible to predict the concentration of active substance in samples with physical properties different from those of the samples included in the calibration model.
  •  
2.
  • Afanasiev, Sergey V., et al. (författare)
  • Experimental apparatus to study crystal channeling in an external SPS beamline
  • 2007
  • Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 6634
  • Tidskriftsartikel (refereegranskat)abstract
    • For the new generation of high intensity hadronic machines as, for instance, LHC, halo collimation is a necessary issue for the accelerator to operate at the highest possible luminosity and to prevent the damage of superconductor magnets.1 We propose an experiment aimed to systematic study of the channeling phenomenology and of the newly observed "volume reflection" effect. This experiment will be performed for an external SPS beamline and will make use of a primary proton beam with 400 GeV/c momentum and very small (∼ 3 μrad) divergence. The advantage of a proposed experiment is precise tracking of particles that interacted with a crystal, so that to determine the single-pass efficiency for all the processes involved. For this purpose, a telescope equipped with high-resolution silicon microstrip detectors will be used. New generation silicon crystals and an extra-precise goniometer are mandatory issues. Main goal of the experiment is to get the precise information on channeling of relativistic particles and, ultimately, on the feasibility of such technique for halo collimation at LHC. In this contribution we review the status of the setting-up of experimental apparatus and its future development in sight of the planned run in September 2006.
  •  
3.
  • Andersen, Torben, et al. (författare)
  • A new concept for large deformable mirrors for extremely large telescopes
  • 2006
  • Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 1996-756X .- 0277-786X. ; 6272:1, s. 324-331
  • Konferensbidrag (refereegranskat)abstract
    • For extremely large telescopes, there is strong need for thin deformable mirrors in the 3-4 m class. So far, feasibility of such mirrors has not been demonstrated. Extrapolation from existing techniques suggests that the mirrors could be highly expensive. We give a progress report on a study of an approach for construction of large deformable mirrors with a moderate cost. We have developed low-cost actuators and deflection sensors that can absorb mounting tolerances in the millimeter range, and we have tested prototypes in the laboratory. Studies of control laws for mirrors with thousands of sensors and actuators are in good progress and simulations have been carried out. Manufacturing of thin, glass mirror blanks is being studied and first prototypes have been produced by a slumping technique. Development of polishing procedures for thin mirrors is in progress
  •  
4.
  • Andersen, Torben, et al. (författare)
  • An Integrated Model of the European Extremely Large Telescope
  • 2008
  • Ingår i: MODELLING, SYSTEMS ENGINEERING, AND PROJECT MANAGEMENT FOR ASTRONOMY III. - : SPIE. - 1996-756X .- 0277-786X. ; 7017, s. 216-227
  • Konferensbidrag (refereegranskat)abstract
    • Integrated models including optics, structures, control systems, and disturbances are important design tools for Extremely Large Telescopes (ELTs). An integrated model has keen formulated for the European ELT and it includes telescope structure, main servos, primary mirror segment control system, wind, optics, wavefront sensor, deformable mirror, and an AO reconstructor and controller. There are three model phases: Initialization, execution of a solver to determine time responses, and post-processing. In near future, the model will be applied for performance studies and design trade-offs for the European ELT.
  •  
5.
  • Ardeberg, Arne, et al. (författare)
  • ELTs, adaptive optics and wavelengths - art. no. 698608
  • 2008
  • Ingår i: Extremely Large Telescopes: Which Wavelengths? Retirement Symposium for Arne Ardeberg. - : SPIE. - 1996-756X .- 0277-786X. ; 6986, s. 98608-98608
  • Konferensbidrag (refereegranskat)abstract
    • A number of Extremely Large Telescopes for visual-infrared and adjacent wavelengths are in various degrees of progress. All have primary mirrors with equivalent diameters larger than 20 m and are intended for operation with adaptive optics systems. We discuss several ELT observing parameters as functions of wavelength. Stellar energy distributions and atomic line spectra are inspected as are the transmission of the Earth's atmosphere, the emissivity of the sky and telescope and instruments as well as detector sensitivity, resolution and signal-to-noise ratio. The spatial resolution depending on the size of the diffraction limited adaptive optics point spread function is discussed. We have evaluated the ELT efficiency in terms of Johnson V to N band photometry, simulating diffraction-limited ELT images of a stellar field at 4 Mpc and 4 kpc, respectively. We conclude that the information content at shorter wavelengths is of dominant nature and that there is every reason to do the utmost to include shorter wavelengths in the AO regime. We propose to adopt a short-wave length goal of 1 000 nm for first light AO with later updates reaching down to visual wavelengths.
  •  
6.
  • Ardeberg, Ame, et al. (författare)
  • ELTs, AO wavelengths and science output
  • 2008
  • Ingår i: GROUND-BASED AND AIRBORNE TELESCOPES II, PTS 1-3. - 0277-786X .- 1996-756X. ; 7012, s. 121-121
  • Konferensbidrag (refereegranskat)abstract
    • A study is presented of the impact on science data from extremely large telescopes of a transformation of wavelength base for optimization of actuator architecture from 2 200 to 1250 nm. From the optical path difference (OPD) data for Euro50, we transform to E-ELT OPDs. We compute the corresponding power spectrum, in which we simulate a higher actuator density via high-pass filtering to convert from K to J band actuator-pitch optimization. From the modified power spectrum we derive the correspondingly modified OPDs, PSFs and Strehl ratios. A massive improvement is demonstrated resulting from converting from AO@K to AO@J. This result is followed up by model-based E-ELT imaging in a field in a galactic disc at a distance of 4 Mpc. The improvements in image quality, background and limiting magnitude are very large as are the increases in photometric precision derived from the field imaging. Further, the great science benefit and large opportunities provided by partial AO is demonstrated. In conclusion, while admittedly challenging, pushing AO optimization to wavelengths as short as possible is of prime concern for the science output of ELTs.
  •  
7.
  • Ardeberg, Arne, et al. (författare)
  • From Euro50 towards a European ELT
  • 2006
  • Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 6267 II, s. 26725-26725
  • Konferensbidrag (refereegranskat)abstract
    • With Euro50 as a convenient telescope laboratory, the Euro50 team has continued development aiming at a European extremely large telescope (ELT). Here, we give a progress report. The needs of science and instrumentation are briefly discussed as is the importance of photometric stability and precision. Results are reported from work on integrated modelling. Details are given concerning point-spread functions (PSFs) obtained with and without adaptive optics (AO). Our results are rather encouraging concerning AO photometry and compensation of edge sensor noise as well as regarding seeing-limited ELT operation. The current status of our development of large deformable mirrors is shown. Low-cost actuators and deflection sensors have been developed as have hierarchic control algorithms. Fabrication of large thin mirror blanks as well as polishing and handling of thin mirrors has been studied experimentally. Regarding adaptive optics, we discuss differential refraction and the limitations imposed by dispersive optical path differences (OPDs) and dispersive anisoplanatism. We report on progress in laser guide star (LGS) performance and a real-time online experiment in multi-conjugate AO (MCAO). We discuss ELTs, high-resolution spectroscopy and pupil slicing with and without use of AO. Finally, we present some recent studies of ELT enclosure options.
  •  
8.
  • Batista, P.D., et al. (författare)
  • Acousto-electric single-photon detector
  • 2007
  • Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 6583, s. 658304-
  • Tidskriftsartikel (refereegranskat)abstract
    • We propose a novel concept for a semiconductor-based single-photon detector for quantum information processing, which is capable of discriminating the number of photons in a light pulse. The detector exploits the charge transport by a surface acoustic wave (SAW) in order to combine a large photon absorption area (thus providing high photon collection efficiency) with a microscopic charge detection area, where the photo generated charge is detected with resolution at the single electron level using single electron transistors (SETs). We present preliminary results on acoustic transport measured in a prototype for the detector as well as on the fabrication of radio-frequency single-electron transistors (RFSETs) for charge detection. The photon detector is a particular example of acousto-electric nanocircuits that are expected to be able to control both the spatial and the spin degrees of freedom of single electrons. If realized, these circuits will contribute substantially to a scalable quantum information technology.
  •  
9.
  • Bjorstrom, Cecilia M., et al. (författare)
  • Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene: PCBM photovoltaic devices - art. no. 61921X
  • 2006
  • Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : International Society for Optical Engineering; 1999. - 0277-786X .- 1996-756X. ; 6192, s. X1921-X1921
  • Tidskriftsartikel (refereegranskat)abstract
    • Spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (APFO-3) blended with [6,6]-phenyl-C-61-butyric acid methyl ester (PCBM) are used as the active material in polymer photovoltaic cells. Such blends are known for their tendency to phase separate during film formation. Tuning the morphology of the blend in a controlled way is one possible road towards higher efficiency. We studied the effect of adding chlorobenzene to chloroform-based blend solutions before spin-coating on the conversion efficiency of APFO-3:PCBM photodiodes, and related that to the lateral and vertical morphology of thin films of the blend. The lateral morphology is imaged by atomic force microscopy (AFM) and the vertical compositional profile is obtained by dynamic secondary ion mass spectrometry (SIMS). The profiles reveal compositional variations consisting of multilayers of alternating polymer-rich and PCBM-rich domains in the blend film spin-coated from chloroform. The vertical compositional variations are caused by surface-directed spinodal waves and are frozen in during the rapid evaporation of a highly volatile solvent. With addition of the low-vapour pressure solvent chlorobenzene, a more homogeneous vertical composition is found. The conversion efficiency for solar cells of this blend was found to be optimal for chloroform: chlorobenzene mixtures with a volume-ratio of 80:1. We have also investigated the role of the substrate on the morphology. We found that blend films spin-coated from chloroform solutions on PEDOT:PSS-coated ITO show a similar compositional structure as the films on silicon, and that changing the substrate from silicon to gold only affects the vertical phase separation in a region close to the substrate interface.
  •  
10.
  • Björström, Cecilia M., et al. (författare)
  • Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene:PCBM photovoltaic devices
  • 2006
  • Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - Cardiff : SPIE - International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; 6192, s. 61921X-
  • Tidskriftsartikel (refereegranskat)abstract
    • Spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (APFO-3) blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are used as the active material in polymer photovoltaic cells. Such blends are known for their tendency to phase separate during film formation. Tuning the morphology of the blend in a controlled way is one possible road towards higher efficiency. We studied the effect of adding chlorobenzene to chloroform-based blend solutions before spin-coating on the conversion efficiency of APFO-3:PCBM photodiodes, and related that to the lateral and vertical morphology of thin films of the blend. The lateral morphology is imaged by atomic force microscopy (AFM) and the vertical compositional profile is obtained by dynamic secondary ion mass spectrometry (SIMS). The profiles reveal compositional variations consisting of multilayers of alternating polymer-rich and PCBM-rich domains in the blend film spin-coated from chloroform. The vertical compositional variations are caused by surface-directed spinodal waves and are frozen in during the rapid evaporation of a highly volatile solvent. With addition of the low-vapour pressure solvent chlorobenzene, a more homogeneous vertical composition is found. The conversion efficiency for solar cells of this blend was found to be optimal for chloroform:chlorobenzene mixtures with a volume-ratio of 80:1. We have also investigated the role of the substrate on the morphology. We found that blend films spin-coated from chloroform solutions on PEDOT:PSS-coated ITO show a similar compositional structure as the films on silicon, and that changing the substrate from silicon to gold only affects the vertical phase separation in a region close to the substrate interface
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 90
Typ av publikation
konferensbidrag (59)
tidskriftsartikel (31)
Typ av innehåll
refereegranskat (84)
övrigt vetenskapligt/konstnärligt (6)
Författare/redaktör
Andersson-Engels, St ... (13)
Andersen, Torben (9)
Owner-Petersen, Mett ... (9)
Svanberg, Sune (5)
Svanberg, Katarina (5)
Enmark, Anita (5)
visa fler...
Spaanenburg, Lambert (4)
Ardeberg, Arne (4)
Johansson, Ann (4)
Svensson, Jenny (4)
Larsson, Anders, 195 ... (3)
Bendsöe, Niels (3)
Browne, Michael (3)
Linde, Peter (3)
Brandell, Daniel, 19 ... (3)
Båth, Magnus, 1974 (3)
Hemdal, Bengt (3)
Tingberg, Anders (3)
Ruschin, Mark (3)
Söderberg, Per G. (3)
Aabloo, Alvo (3)
Inganäs, Olle (2)
Goksör, Mattias, 197 ... (2)
Stake, Jan, 1971 (2)
Khrennikov, Andrei (2)
Willander, Magnus, 1 ... (2)
Andersson, Mats R (2)
Zhang, Fengling (2)
Wang, Shu Min, 1963 (2)
Belitsky, Victor, 19 ... (2)
Wårdell, Karin, 1959 ... (2)
Klason, Peter, 1977 (2)
Vassilev, Vessen, 19 ... (2)
Vukusic, Josip, 1972 (2)
Täljsten, Björn (2)
Andersson, Ingvar (2)
Timberg, Pontus (2)
Larsson, Marcus (2)
Strömberg, Tomas (2)
Bryllert, Tomas, 197 ... (2)
Rysz, Jakub (2)
Bernasik, Andrzej (2)
Budkowski, Andrzej (2)
Gustavsson, Johan, 1 ... (2)
Swartling, Johannes (2)
Risacher, Christophe ... (2)
Fredriksson, Ingemar (2)
Nilsson, Svante (2)
Liivat, Anti (2)
Kasemägi, Heiki (2)
visa färre...
Lärosäte
Lunds universitet (44)
Chalmers tekniska högskola (16)
Linköpings universitet (10)
Kungliga Tekniska Högskolan (9)
Göteborgs universitet (8)
Uppsala universitet (8)
visa fler...
Luleå tekniska universitet (3)
Linnéuniversitetet (2)
Karlstads universitet (2)
visa färre...
Språk
Engelska (90)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (47)
Teknik (23)
Medicin och hälsovetenskap (12)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy