| 1. |
- Abazari, R., et al.
(författare)
-
High specific capacitance of a 3D-metal-organic framework-confined growth in CoMn2O4nanostars as advanced supercapacitor electrode materials
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 9:17, s. 11001-11012
-
Tidskriftsartikel (refereegranskat)abstract
- In the presence of fossil fuels, several environmental concerns, such as energy shortage, environmental pollution, and global warming may occur in the present century. In this respect, supercapacitors have been introduced as green energy storage systems playing a central role in providing a sustainable human society. In this work, an advanced strategy was initially demonstrated through various synergistic effects to synthesize cobalt(ii) metal-organic framework#CoMn2O4nanocomposites (Co(ii)-TMU-63#CoMn2O4NCPs) having interfaces adapted at tunable chemical nanocomposites for hybrid supercapacitors. The given NCPs showed excellent electrochemical performance at 7 A g−1current density endowed with a specific capacity of 156 mA h g−1(1420 F g−1) and good cycling stability at 10 A g−1current density, following 7000 cycles with 93.3% capacity retention. The hybrid supercapacitor was assembled using activated carbon (AC) as negative and NCPs as positive electrodes, which delivered specific energy of 38.54 W h kg−1and maximum-specific power of 2312.4 W kg−1with 89.5% capacity retention over 7000 cycles. The enhanced electrochemical performances of Co(ii)-TMU-63#CoMn2O4NCPs can be attributed to the high surface area, porous structure, open metal sites functioning as electron collectors to enhance electron transfer as well as unique morphology and synergistic effect between Co(ii)-TMU-63 and CoMn2O4. This work may inspire a new development of interface-adapted nanocomposite for advanced energy storage applications. © The Royal Society of Chemistry 2021.
|
|
| 2. |
- An, J., et al.
(författare)
-
Supramolecular Co-adsorption on TiO2to enhance the efficiency of dye-sensitized solar cells
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 9:23, s. 13697-13703
-
Tidskriftsartikel (refereegranskat)abstract
- Three novel push-pull dyes, with carbazole donors, codedAJ502,TZ101andTZ102are synthesized and applied as co-sensitizers in dye-sensitized solar cells (DSSCs).TZ101andTZ102have similar structures except for two fluorine atoms introduced on the benzotriazole (BTZ) unit.AJ502shows a near-IR absorption spectrum that is suitable for co-sensitization withTZ101andTZ102. The co-sensitized DSSC device based onCO-1(AJ502 : TZ101= 3 : 4 (0.075 mM : 0.1 mM)) achieves a power conversion efficiency (PCE) of 10.3% under AM 1.5G irradiation, with 1.06 V open-circuit voltage (Voc), 13.75 mA cm−2short-circuit photocurrent density (Jsc), and 70.8% fill factor (FF), a significant improvement compared to the single dye, 6.0% forAJ502and 5.1% forTZ101with a copper(i/ii)-based redox electrolyte. A PCE of 8.9% is also obtained by devices based onCO-2(AJ502 : TZ102= 3 : 4). ForCO-1, the fluorine atoms inTZ101play a critical role by widening the active light capturing bands of bothTZ101andAJ502on the TiO2film whileTZ102andAJ502show weaker interaction under the same conditions. The UV-vis spectrum and Raman spectrum revealed thatAJ502can form supramolecules withTZ101andTZ102formed on the TiO2film.
|
|
| 3. |
- Banerjee, Amitava, et al.
(författare)
-
Promise and reality of organic electrodes from materials design and charge storage perspective
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:29, s. 15215-15234
-
Forskningsöversikt (refereegranskat)abstract
- Organic electrode materials are becoming increasingly important as they reduce the C-footprint as well as the production cost of currently used and studied rechargeable batteries. With increasing demand for high-energy-density devices, over the past few decades, various innovative new materials based on the fundamental structure-property relationships and molecular design have been explored to enable high-capacity next-generation battery chemistries. One critical dimension that catalyzes this study is the building up of an in-depth understanding of the structure-property relationship and mechanism of alkali ion batteries. In this review, we present a critical overview of the progress in the technical feasibility of organic battery electrodes for use in long-term and large-scale electrical energy-storage devices based on the materials designing, working mechanisms, performance, and battery safety. Specifically, we discuss the underlying alkali ion storage mechanisms in specific organic batteries, which could provide the designing requirements to overcome the limitations of organic batteries. We also discuss the promising future research directions in the field of alkali ion organic batteries, especially multivalent organic batteries along with monovalent alkali ion organic batteries.
|
|
| 4. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
Scalable and thermally-integrated solar water-splitting modules using Ag-doped Cu(In,Ga)Se2 and NiFe layered double hydroxide nanocatalysts
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 10:22, s. 12079-12091
-
Tidskriftsartikel (refereegranskat)abstract
- Photovoltaic (PV) electrolysis is an important and powerful technology for environmentally-friendly fuel production based on solar energy. By directly coupling solar cell materials to electrochemical systems to perform water electrolysis, solar energy can be converted into hydrogen fuel utilizing locally-generated heat and avoid losses from DC-DC convertors and power grid transmission. Although there have been significant contributions to the photoelectrochemical and PV-electrolysis field using isolated laboratory cells, the capacity to upscale and retain high levels of efficiency in larger modules remains a critical issue for widespread use and application. In this study, we develop thermally-integrated, solar-driven water-splitting device modules using AgCu(In,Ga)Se2 (ACIGS) and an alkaline electrolyzer system with NiFe-layered double hydroxide (LDH) nanocatalysts with devices of 82-100 cm2 area. The Ga-content in the ACIGS solar cells is tuned to achieve an optimal voltage for the catalyst system, and the average efficiencies and durability of the PV-electrolyzer were tested in up to seven-day indoor and 21 day outdoor operations. We achieved a solar-to-hydrogen (STH) module efficiency of 13.4% from gas volume measurements for the system with a six-cell CIGS-electrolyzer module with an active area of 82.3 cm2 and a 17.27% PV module efficiency under 100 mW cm−2 illumination, and thus 77% electricity-to-hydrogen efficiency at one full sun. Outdoor tests under mid-Europeen winter conditions exhibited an STH efficiency between 10 and 11% after the initial activation at the installation site in Jülich, Germany, in December 2020, despite challenging outdoor-test weather conditions, including sub-zero temperatures.
|
|
| 5. |
- Beydaghi, Hossein, et al.
(författare)
-
Functionalized metallic transition metal dichalcogenide (TaS2) for nanocomposite membranes in direct methanol fuel cells
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 9:10, s. 6368-6381
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we designed a novel nanocomposite proton-exchange membrane (PEM) based on sulfonated poly(ether ether ketone) (SPEEK) and tantalum disulfide functionalized with terminal sulfonate groups (S-TaS2). The PEMs are prepared through a solution-casting method and exploited in direct methanol fuel cells (DMFCs). Two-dimensional S-TaS2 nanoflakes were prepared as a functional additive to produce the novel nanocomposite membrane for DMFCs due to their potential as a fuel barrier and an excellent proton conductor. To optimize the degree of sulfonation (DS) of SPEEK and the weight percentage (wt%) of S-TaS2 nanoflakes in PEMs, we used the central composite design of the response surface method. The optimum PEM was obtained for SPEEK DS of 1.9% and a weight fraction (wt%) of S-TaS2 nanoflakes of 70.2%. The optimized membrane shows a water uptake of 45.72%, a membrane swelling of 9.64%, a proton conductivity of 96.24 mS cm(-1), a methanol permeability of 2.66 x 10(-7) cm(2) s(-1), and a selectivity of 36.18 x 10(4) S s cm(-3). Moreover, SPEEK/S-TaS2 membranes show superior thermal and chemical stabilities compared to those of pristine SPEEK. The DMFC fabricated with the SPEEK/S-TaS2 membrane has reached the maximum power densities of 64.55 mW cm(-2) and 161.18 mW cm(-2) at 30 degrees C and 80 degrees C, respectively, which are similar to 78% higher than the values obtained with the pristine SPEEK membrane. Our results demonstrate that SPEEK/S-TaS2 membranes have a great potential for DMFC applications.
|
|
| 6. |
- Bharmoria, Pankaj, 1985, et al.
(författare)
-
Recyclable optical bioplastics platform for solid state red light harvesting via triplet-triplet annihilation photon upconversion
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7496 .- 2050-7488. ; 10:40, s. 21279-21290
-
Tidskriftsartikel (refereegranskat)abstract
- Sustainable photonics applications of solid-state triplet-triplet annihilation photon upconversion (TTA-UC) are limited by a small UC spectral window, low UC efficiency in air, and non-recyclability of polymeric materials used. In a step to overcome these issues, we have developed new recyclable TTA-UC bioplastics by encapsulating TTA-UC chromophores liquid inside the semicrystalline gelatin films showing broad-spectrum upconversion (red/far-red to blue) with high UC efficiency in air. For this, we synthesized a new anionic annihilator, sodium-TIPS-anthracene-2-sulfonate (TIPS-AnS), that combined with red/far-red sensitizers (PdTPBP/Os(m-peptpy)(2)(TFSI)(2)), a liquid surfactant Triton X-100 reduced (TXr) and protein gelatin (G) formed red/far-red to blue TTA-UC bioplastic films just by air drying of their aqueous solutions. The G-TXr-TIPS-AnS-PdTPBP film showed record red to blue (633 to 478 nm) TTA-UC quantum yield of 8.5% in air. The high UC quantum yield has been obtained due to the fluidity of dispersed TXr containing chromophores and oxygen blockage by gelatin fibers that allowed efficient diffusion of triplet excited chromophores. Further, the G-TXr-TIPS-AnS-Os(m-peptpy)(2)(TFSI)(2) bioplastic film displayed far-red to blue (700-730 nm to 478 nm) TTA-UC, demonstrating broad-spectrum photon harvesting. Finally, we demonstrated the recycling of G-TXr-TIPS-AnS-PdTPBP bioplastics by developing a downstream approach that gives new directions for designing future recyclable photonics bioplastic materials.
|
|
| 7. |
- Boota, Muhammad, et al.
(författare)
-
MXene binder stabilizes pseudocapacitance of conducting polymers
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 9:36, s. 20356-20361
-
Tidskriftsartikel (refereegranskat)abstract
- Conducting polymers (CPs) are by far the most studied organic materials for supercapacitors. Yet, their structural instability stemming from volumetric expansion/contraction during charge/discharge results in capacitance loss after moderate cycling that limits their applications. Here, we show that the remarkable cycling stability, capacitance, and rate performance can be achieved by replacing conventional electrode additives (carbon black or insulating polymer binder) with titanium carbide (Ti3C2Tx) MXene. Using polyaniline (PANI) as a model system, an addition of only 15 wt% of Ti3C2Tx MXene binder delivered remarkable capacitance retention of 96% after 10 000 cycles at 50 mV s(-1) and high-rate capability with a capacitance of 434 F g(-1). Using density functional theory (DFT) calculations, we show that, unlike insulating polymer binders, surface groups of MXene bond to PANI with a significantly high binding energy (up to -2.11 eV) via a charge transfer mechanism. This is one of the key mechanisms to achieve a high electrochemical performance of the CP-based electrodes when MXene is used as a binder. We expect that a similar approach can be used for stabilizing other organic electrode materials.
|
|
| 8. |
- Bykova, Elena, et al.
(författare)
-
Synthesis, crystal structure, and properties of stoichiometric hard tungsten tetraboride, WB4
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 10:37, s. 20111-20120
-
Tidskriftsartikel (refereegranskat)abstract
- Tungsten tetraboride has been known so far as a non-stoichiometric compound with a variable composition (e.g. WB4-x, WB4+x). Its mechanical properties could exceed those of hard tungsten carbide, which is widely used nowadays in science and technology. The existence of stoichiometric WB4 has not been proven yet, and its structure and crystal chemistry remain debatable to date. Here we report the synthesis of single crystals of the stoichiometric WB4 phase under high-pressure high-temperature conditions. The crystal structure of WB4 was determined using synchrotron single-crystal X-ray diffraction. In situ high-pressure compressibility measurements show that the bulk modulus of WB4 is 238.6(2) GPa for B = 5.6(0). Measurements of mechanical properties of bulk polycrystalline sub-millimeter size samples under ambient conditions reveal a hardness of similar to 36 GPa, confirming that the material falls in the category of superhard materials.
|
|
| 9. |
- Chang, Ribooga, et al.
(författare)
-
Synthetic solid oxide sorbents for CO2 capture : state-of-the art and future perspectives
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:4, s. 1682-1705
-
Forskningsöversikt (refereegranskat)abstract
- Carbon capture is an important and effective approach to control the emission of CO2 from point sources such as fossil fuel power plants, industrial furnaces and cement plants into the atmosphere. For an efficient CO2 capture operation, many aspects of the CO2 capture steps need to be carefully considered. Currently the most mature CO2 capture technology is liquid amine scrubbing. Alternatively, solid sorbents can be used to effectively capture CO2 while alleviating the disadvantages associated with liquid amine sorbents. In this review, we critically assess solid metal oxide CO2 sorbents, especially oxides of group 1 (Li, Na and K) and group 2 (Mg, Ca, Sr and Ba) metals, for capturing CO2 at moderate to high temperatures. In particular, we focus on the recent advances in developing synthetic metal oxide sorbents, and the correlation between the design, synthetic approaches and their cyclic CO2 capture performance, which are characterised by CO2 uptake capacity, rate of carbonation and cyclic stability. The state-of-the-art, challenges, opportunities and future research directions for these metal oxide sorbents are discussed. By devoting more research effort to address the issues identified, there can be great potential to utilise Group 1 and 2 metal oxides as cost-effective, highly efficient sorbents for CO2 capture in a variety of carbon capture applications.
|
|
| 10. |
- Chen, Pan, et al.
(författare)
-
Surface modification effects on nanocellulose - molecular dynamics simulations using umbrella sampling and computational alchemy
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7496 .- 2050-7488. ; 8:44, s. 23617-23627
-
Tidskriftsartikel (refereegranskat)abstract
- Topochemical modification of nanocellulose particles, in particular acetylation, is commonly used to reduce hygroscopicity and improve their dispersibility in non-polar polymers. Despite enormous experimental efforts on cellulose surface modification, there is currently no comprehensive model which considers both (a) the specific interactions between nanocellulose particles and the surrounding liquid or polymer matrix, and (b) the interactions between the particles themselves. The second mechanism is therefore frequently ignored. The present approach is based on atomistic molecular dynamics (MD) simulations, where computational alchemy is used to calculate the changes in interactions between nanocellulose and the surrounding medium (liquid or polymer) upon modification. This is combined with another method, based on potential of mean force, to calculate interactions between particles. Results show that both contributions are of equal importance for nanoparticle surface acetylation effects. The proposed method is not restricted to either cellulose or acetylation, and has the prospect to find application in a broad context of nanomaterials design.
|
|
