| 1. |
- Adawi, Tom, 1970, et al.
(författare)
-
Characterizing Software Engineering Students' Discussions during Peer Instruction : Opportunities for Learning and Implications for Teaching
- 2016
-
Ingår i: International Journal of Engineering Education. - 0949-149X. ; 32:2, s. 927-936
-
Tidskriftsartikel (refereegranskat)abstract
- Peer instruction is a method for activating students during lectures, which has gained a considerable amount of attention in higher education due to claims of dramatic improvement in learning gains. The purpose of this qualitative research study is to investigate what types of discussions engineering students engage in during a peer instruction session and what learning possibilities that are enabled by these different types of discussions. We observed twelve students during six separate and simulated peer instruction sessions and the students were interviewed individually after the sessions.Ananalysis of the data revealed that the students engaged in three qualitatively different types of discussions: affirmative discussions, motivating discussions, and argumentative discussions. We characterize these different types of discussions in terms of the number of alternative answers the students discuss, the extent to which they draw on prior knowledge and experiences, as well as the fundamental difference between an explanation and an argument. A good opportunity for learning is opened up when students are aspiring to find the truth, not simply being satisfied with what they believe to be true. We conclude that students do not always engage in discussions that support their learning in the best way, and we discuss implications for using peer instruction as a teaching method.
|
|
| 2. |
- Ahrentorp, Fredrik, et al.
(författare)
-
Sensitive magnetic biodetection using magnetic multi-core nanoparticles and RCA coils
- 2017
-
Ingår i: Journal of Magnetism and Magnetic Materials. - : Elsevier BV. - 0304-8853 .- 1873-4766. ; 427, s. 14-18
-
Tidskriftsartikel (refereegranskat)abstract
- We use functionalized iron oxide magnetic multi-core particles of 100 nm in size (hydrodynamic particle diameter) and AC susceptometry (ACS) methods to measure the binding reactions between the magnetic nanoparticles (MNPs) and bio-analyte products produced from DNA segments using the rolling circle amplification (RCA) method. We use sensitive induction detection techniques in order to measure the ACS response. The DNA is amplified via RCA to generate RCA coils with a specific size that is dependent on the amplification time. After about 75 min of amplification we obtain an average RCA coil diameter of about 1 mu m. We determine a theoretical limit of detection (LOD) in the range of 11 attomole (corresponding to an analyte concentration of 55 fM for a sample volume of 200 mu L) from the ACS dynamic response after the MNPs have bound to the RCA coils and the measured ACS readout noise. We also discuss further possible improvements of the LOD.
|
|
| 3. |
- Almhöjd, Ulrica S., et al.
(författare)
-
Molecular Insights into Covalently Stained Carious Dentine Using Solid-State NMR and ToF-SIMS
- 2017
-
Ingår i: Caries Research. - : S. Karger AG. - 0008-6568 .- 1421-976X. ; 51:3, s. 255-263
-
Tidskriftsartikel (refereegranskat)abstract
- Dyes currently used to stain carious dentine have a limited capacity to discriminate normal dentine from carious dentine, which may result in overexcavation. Consequently, finding a selective dye is still a challenge. However, there is evidence that hydrazine-based dyes, via covalent bonds to functional groups, bind specifically to carious dentine. The aim of this study was to investigate the possible formation of covalent bonds between carious dentine and N-15(2)-hydrazine and the hydrazine-based dye, N-15(2)-labelled Lucifer Yellow, respectively. Powdered dentine from extracted carious and normal teeth was exposed to the dyes, and the staining reactions were analysed using time-of-flight secondary ion mass spectrometry (ToF-SIMS), solid-state C-13-labelled nuclear magnetic resonance (NMR) and N-15-NMR spectroscopy. The results showed that N-15(2)-hydrazine and N-15(2)-labelled Lucifer Yellow both bind to carious dentine but not to normal dentine. It can thus be concluded that hydrazine-based dyes can be used to stain carious dentine and leave normal dentine unstained. (C) 2017 S. Karger AG, Basel
|
|
| 4. |
- Almstrand, Ann-Charlotte, et al.
(författare)
-
Airway monitoring by collection and mass spectrometric analysis of exhaled particles.
- 2009
-
Ingår i: Analytical chemistry. - : American Chemical Society (ACS). - 1520-6882 .- 0003-2700. ; 81:2, s. 662-8
-
Tidskriftsartikel (refereegranskat)abstract
- We describe a new method for simultaneously collecting particles in exhaled air for subsequent chemical analysis and measuring their size distribution. After forced exhalation, particles were counted and collected in spots on silicon wafers with a cascade impactor. Several phospholipids were identified by time-of-flight secondary ion mass spectrometric analysis of the collected spots, suggesting that the particles originated from the lower airways. The amount of particles collected in ten exhalations was sufficient for characterizing the phospholipid composition. The feasibility of the technique in respiratory research is demonstrated by analysis of the phospholipid composition of exhaled particles from healthy controls, patients with asthma, and patients with cystic fibrosis. We believe this technology will be useful for monitoring patients with respiratory disease and has a high potential to detect new biomarkers in exhaled air.
|
|
| 5. |
- Almstrand, Ann-Charlotte, et al.
(författare)
-
An explorative study on respiratory health among operators working in polymer additive manufacturing
- 2023
-
Ingår i: Frontiers in Public Health. - : Frontiers Media S.A.. - 2296-2565. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM), or 3D printing, is a growing industry involving a wide range of different techniques and materials. The potential toxicological effects of emissions produced in the process, involving both ultrafine particles and volatile organic compounds (VOCs), are unclear, and there are concerns regarding possible health implications among AM operators.The objective of this study was to screen the presence of respiratory health effects among people working with liquid, powdered, or filament plastic materials in AM. MethodsIn total, 18 subjects working with different additive manufacturing techniques and production of filament with polymer feedstock and 20 controls participated in the study. Study subjects filled out a questionnaire and underwent blood and urine sampling, spirometry, impulse oscillometry (IOS), exhaled NO test (FeNO), and collection of particles in exhaled air (PEx), and the exposure was assessed. Analysis of exhaled particles included lung surfactant components such as surfactant protein A (SP-A) and phosphatidylcholines. SP-A and albumin were determined using ELISA. Using reversed-phase liquid chromatography and targeted mass spectrometry, the relative abundance of 15 species of phosphatidylcholine (PC) was determined in exhaled particles. The results were evaluated by univariate and multivariate statistical analyses (principal component analysis). ResultsExposure and emission measurements in AM settings revealed a large variation in particle and VOC concentrations as well as the composition of VOCs, depending on the AM technique and feedstock. Levels of FeNO, IOS, and spirometry parameters were within clinical reference values for all AM operators. There was a difference in the relative abundance of saturated, notably dipalmitoylphosphatidylcholine (PC16:0_16:0), and unsaturated lung surfactant lipids in exhaled particles between controls and AM operators. ConclusionThere were no statistically significant differences between AM operators and controls for the different health examinations, which may be due to the low number of participants. However, the observed difference in the PC lipid profile in exhaled particles indicates a possible impact of the exposure and could be used as possible early biomarkers of adverse effects in the airways.
|
|
| 6. |
- Alt Murphy, Margit, 1970, et al.
(författare)
-
An upper body garment with integrated sensors for people with neurological disorders – early development and evaluation
- 2019
-
Ingår i: BMC Biomedical Engineering. - : Springer Science and Business Media LLC. - 2524-4426. ; 1:3
-
Tidskriftsartikel (refereegranskat)abstract
- Background: To develop a novel wearable garment with integrated sensors for continuous monitoring of physiological and movement related variables to evaluate progression, tailor treatments and improve diagnosis in epilepsy, Parkinson’s disease and stroke. Methods: An iterative development process and evaluation of an upper body garment with integrated sensors included: identification of user needs, specification of technical and garment requirements, garment development and production as well as evaluation of garment design, functionality and usability. The project is a multidisciplinary collaboration with experts from medical, engineering, textile, and material science within the wearITmed consortium. The work was organized in regular meetings, task groups and hands-on workshops. User needs were identified using results from a mixed-methods systematic review, a focus group study and expert groups. Usability was evaluated in 19 individuals (13 controls, 6 patients with Parkinson’s disease) using semi-structured interviews and qualitative content analysis. Results: A prototype designed to monitor movements and heart rate was developed. The garment was well accepted by the users regarding design and comfort, although the users were cautious about the technology and suggested improvements. All electronic components passed a washability test. The most robust data was obtained from accelerometer and gyroscope sensors while the electrodes for heart rate registration were sensitive to motion. artefacts. The algorithm development within the wearITmed consortium has shown promising results. Conclusions: The prototype was accepted by the users. Technical improvements are needed, but preliminary data indicate that the garment has potential to be used as a tool for diagnosis and treatment selection and could provide added value for monitoring seizures in epilepsy, fluctuations in PD and activity levels in stroke. Future work aims to improve the prototype further, develop algorithms, and evaluate the functionality and usability in targeted patient groups. The potential of incorporating blood pressure and heart-rate variability monitoring will also be explored.
|
|
| 7. |
- Alt Murphy, Margit, 1970, et al.
(författare)
-
Comparison of Accelerometer-Based Arm, Leg and Trunk Activity at Weekdays and Weekends During Subacute Inpatient Rehabilitation After Stroke
- 2019
-
Ingår i: Journal of Rehabilitation Medicine. - : Medical Journals Sweden AB. - 1650-1977 .- 1651-2081. ; 51:6, s. 426-433
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To determine whether there are differences in arm, leg and trunk activity measured by acceleration between weekdays and weekends in people undergoing rehabilitation in the subacute stage after stroke. Patients: Twenty-eight individuals with stroke (mean age 55.4 years; severe to mild impairment) and 10 healthy controls. Methods: A set of 5 3-axial accelerometers were used on the trunk, wrists and ankles during 2 48-h sessions at weekdays and over a weekend. Day-time acceleration raw data were expressed as the signal magnitude area. Asymmetry between the affected and less-affected limb was calculated as a ratio. Results: Participants with stroke used their both arms and legs less at weekends than on weekdays (p<0.05, effect size 0.3 2-0.5 7). Asymmetry between the affected and less-affected arm was greater at weekends (p < 0.05, effect size 0.32). All activity measures, apart from the less-affected arm on weekdays, were lower in stroke compared with controls (p<0.05, effect size 0.4-0.8). No statistically significant differences were detected between weekday and weekend activity for the control group. One-third of participants perceived the trunk sensor as inconvenient to wear. Conclusion: Increased focus needs to be applied on activities carried out during weekends at rehabilitation wards.
|
|
| 8. |
- Altuntas Vural, Ceren, et al.
(författare)
-
International container shipping through the Covid-19 pandemic - Disruptions from a Swedish perspective
- 2024
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- At the onset of the pandemic in spring 2020, the Swedish shipping sector was first affected by border closures preventing passengers to use RoPax shipping and cruise ferries. There were some blank sailings but in general they kept operating to foster intra-European trade by trucks despite the missing revenues from passengers. Shipping in general was affected by port disruptions and complicated crew changes. Eventually, however, it was clear that the most dramatic disruptions on a global scale where experienced in the container segment. General media reported on delayed goods, high freight rates and, however not related to the pandemic, the Ever Given blocking the Suez Canal for a week in March 2021. Currently, there are few reports of supply chains and shipping suffering from disruptions and capacity constraints related to the pandemic. The peak in freight rates was rather replaced by depressed rates and there is a certain risk that some logisticians and supply chain managers regard the pandemic as a once-in-a-lifetime event and just want to get back to a previous behaviour seeing container shipping as a commodity with indefinite capacity at a reasonable price. Nevertheless, the war in Ukraine, the drought in the Panama Canal and the attacks by the Houthi rebels in the Red Sea create other problems for container shipping. Freight rates increase significantly, but from very low levels. The purpose of the report is to describe and analyse how international container shipping was affected by the Covid-19 pandemic and other disruptions. The analysis takes a Swedish perspective on disruptions and tries to go beyond the anecdotal reporting and capture what happened and why. Container shipping is put into a context of economy, consumption, world trade, supply chains and logistics. The pandemic and more current events affecting container shipping market are described together with how shipping lines responded. A series of interviews with Swedish actors revealed how they perceived the disruptions and what countermeasures the actors have applied to mitigate the effects, their organisational learning and how they prepare for future disruptions.
|
|
| 9. |
- An, Junxue, et al.
(författare)
-
Comparison of a Brush-with-Anchor and a Train-of-Brushes Mucin on Poly(methyl methacrylate) Surfaces : Adsorption, Surface Forces, and Friction
- 2014
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 15:4, s. 1515-1525
-
Tidskriftsartikel (refereegranskat)abstract
- Interfacial properties of two types of mucins have been investigated at the aqueous solution/poly(methyl methacrylate) (PMMA) interface. One is commercially available bovine submaxillary mucin, BSM, which consists of alternating glycosylated and nonglycosylated regions. The other one is a recombinant mucin-type fusion protein, PSGL-1/mIgG(2b), consisting of a glycosylated mucin part fused to the Fc part of an immunoglobulin. PSGL-1/mIgG(2b) is mainly expressed as a (timer upon production. A quartz crystal microbalance with dissipation was used to study the adsorption of the mucins to PMMA surfaces. The mass of the adsorbed mucin layers, including the adsorbed mucin and water trapped in the layer, was found to be significantly higher for PSGL-1/mIgG(2b) than for BSM. Atomic force microscopy with colloidal probe was employed to study interactions and frictional forces between mucin-coated PMMA surfaces. Purely repulsive forces of steric origin were Observed between PSGL-1/mIgG(2b) mucin layers, whereas a small adhesion was detected between BSM layers and attributed to bridging. Both mucin layers reduced the friction force between PMMA surfaces in aqueous solution. The reduction was, however, significantly more pronounced for PSGL-1/mIgG(2b). The effective friction coefficient between PSGL-1/mIgG(2b)-coated PMMA surfaces is as low as 0.02 at low loads, increasing to 0.24 at the highest load explored, 50 nN. In contrast, a friction coefficient of around 0.7 was obtained between BSM-coated PMMA surfaces. The large differences in interfacial properties for the two mucins are discussed in relation to their structural differences.
|
|
| 10. |
- An, Junxue, et al.
(författare)
-
Influence of Glycosylation on Interfacial Properties of Recombinant Mucins : Adsorption, Surface Forces, and Friction
- 2017
-
Ingår i: Langmuir. - : American Chemical Society. - 0743-7463 .- 1520-5827. ; 33:18, s. 4386-4395
-
Tidskriftsartikel (refereegranskat)abstract
- Interfacial properties of two brush-with-anchor mucins, C-P55 and C-PSLex, have been investigated at the aqueous solution/poly(methyl methacrylate) (PMMA) interface. Both are recombinant mucin-type fusion proteins, produced by fusing the glycosylated mucin part of P-selectin glycoprotein ligand-1 (PSLG-1) to the Fc part of a mouse immunoglobulin in two different cells. They are mainly expressed as dimers upon production. Analysis of the O-glycans shows that the C-PSLex mucin has the longer and more branched side chains, but C-P55 has slightly higher sialic acid content. The adsorption of the mucins to PMMA surfaces was studied by quartz crystal microbalance with dissipation. The sensed mass, including the adsorbed mucin and water trapped in the layer, was found to be similar for these two mucin layers. Atomic force microscopy with colloidal probe was employed to study surface and friction forces between mucin-coated PMMA surfaces. Purely repulsive forces of steric origin were observed between mucin layers on compression, whereas a small adhesion was detected between both mucin layers on decompression. This was attributed to chain entanglement. The friction force between C-PSLex-coated PMMA is lower than that between C-P55-coated PMMA at low loads, but vice versa at high loads. We discuss our results in terms of the differences in the glycosylation composition of these two mucins.
|
|
