| 1. |
- Abtahi, Z., et al.
(författare)
-
Ethanol production by Mucor indicus at high glucose and ethanol concentrations
- 2010
-
Ingår i: Minerva Biotecnologica. - : Edizioni Minerva Medica. - 1120-4826 .- 1827-160X. ; 22:3-4, s. 83-89
-
Tidskriftsartikel (refereegranskat)abstract
- Mucor indicus was cultivated under aerobic and anaerobic conditions to study its tolerance against high concentration of glucose up to 350 g/L and ethanol up to 120 g/L present in the medium. The fungus could grow well even in 350 g/L glucose and produce ethanol, but it was able to assimilate the entire glucose when its concentration was less than 200 g/L. On the other hand, M. indicus produced ethanol as the main product with yield and concentration up to 0.45 g/g and 73 g/L, respectively, while glycerol, its only major byproduct, was produced up to 24 g/L. However, the fungus was not so tolerant against exogenously added ethanol, and it could not grow with more than 40 g/L added ethanol to the culture. Under aerobic conditions, M. indicus displayed different morphology, switching from long filamentous to yeast-like growth forms by increasing initial glucose concentration. This implies that yeast-like growth can be induced by growing M. indicus at high glucose concentration. Under anaerobic conditions, only one yeast-like form was observed.
|
|
| 2. |
- Barghi, Hamidreza, 1970, et al.
(författare)
-
Catalytic Synthesis of Bulk Hydrophilic Acetaldehyde-Modified Polyamide 46
- 2014
-
Ingår i: Current Organic Synthesis. - : Bentham Science Publishers Ltd.. - 1570-1794 .- 1875-6271. ; 11:2, s. 288-294
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrophilization of Polyamide 46 (PA46) via modification with acetaldehyde in continuous phase was studied. The chemical modification of PA 46 with acetaldehyde resulted in a water-swollen polymer with hydrophilic property. The polyamide 46 undergoes a nucleophilic addition with acetaldehyde in the presence of aluminum chloride as a catalyst. The extent of bulk hydroxyethylation using AlCl3 resulted in 95.65% modification counted as total N-hydroxyethylated polyamide 46. The modification resulted in improved hydrophilic properties, and a maximum surface free energy of 44.6 mJ/m2 was achieved after 3 h reaction, whereas the unmodified PA46 had a surface free energy of 11.2 mJ/m2. In addition, thermal properties of the polymers were studied using differential scanning calorimetry and thermogravimetric analyses. The functionalization leads to decrease in the crystallization energy from 88 J/g to 51 J/g, while the melting energy is changed from 110 J/g to 53 J/g. Furthermore, the thermal stability of the PA46 to pyrolysis was diminished after hydroxylation.
|
|
| 3. |
- Bidgoli, Hossein, et al.
(författare)
-
Effect of carboxymethylation conditions on water binding capacity of chitosan-based superabsorbents
- 2010
-
Ingår i: Carbohydrate Research. - : Elsevier - Pergamon. - 0008-6215 .- 1873-426X. ; 345:18, s. 2683-2689
-
Tidskriftsartikel (refereegranskat)abstract
- A superabsorbent polymer (SAP) from chitosan was provided via carboxymethylation of chitosan, followed by cross-linking with glutaraldehyde and freeze-drying. This work was focused on an investigation of the effects of monochloroacetic acid (MCAA), sodium hydroxide, and reaction time on preparation of carboxymethylchitosan (CMCS). The CMCS products were characterized using FTIR spectroscopy, and their degrees of substitution (DS) were measured using conductimetry and FTIR analysis. The highest DS value was obtained when the carboxymethylation reaction was carried out using 1.75 g MCAA and 1.75 g NaOH per g of chitosan in 4 h. The water solubilities of the CMCS products at various pHs were also evaluated, and the results indicated a significant impact of the reaction parameters on the solubility of CMCS. The CMCSs with the highest DS value resulted in SAPs having the highest water-binding capacity (WBC). TheWBCof the best SAP measured after 10 minexposure in distilled water, 0.9% NaCl solution, synthetic urine, and artificial blood was 104, 33, 30, and 57 g/g, respectively. The WBC of this SAP at pH 2–9 passed a maximum at pH 6.
|
|
| 4. |
- Chandolias, Konstantinos, et al.
(författare)
-
Protective effect of a reverse membrane bioreactor against toluene and naphthalene in anaerobic digestion
- 2022
-
Ingår i: Biotechnology and Applied Biochemistry. - : Wiley. - 1470-8744 .- 0885-4513. ; 69:3, s. 1267 -1274
-
Tidskriftsartikel (refereegranskat)abstract
- Raw syngas contains tar contaminants including toluene and naphthalene, which inhibit its conversion to methane. Cell encasement in a hydrophilic reverse membrane bioreactor (RMBR) could protect the cells from hydrophobic contaminants. This study aimed to investigate the inhibition of toluene and naphthalene and the effect of using RMBR. In this work, toluene and naphthalene were added at concentrations of 0.5–1.0 and 0.1–0.2 g/L in batch operation. In continuous operation, concentration of 0–6.44 g/L for toluene and 0–1.28 g/L for naphthalene were studied. The results showed that no inhibition was observed in batch operation for toluene and naphthalene at concentrations up to 1 and 0.2 g/L, respectively. In continuous operation of free cell bioreactors (FCBRs), inhibition of toluene and naphthalene started at 2.05 and 0.63 g/L, respectively. When they were present simultaneously, inhibition of toluene and naphthalene occurred at concentrations of 3.14 and 0.63 g/L, respectively. In continuous RMBRs, no inhibition for toluene and less inhibition for naphthalene were observed, resulting in higher methane production from RMBR than that of FCBR. These results indicated that RMBR system gave a better protection effect against inhibitors compared with FCBR.
|
|
| 5. |
- Christia, Abdi, 1991, et al.
(författare)
-
Ethanol production from alkali-pretreated oil palm empty fruit bunch by simultaneous saccharification and fermentation with mucor indicus
- 2016
-
Ingår i: International Journal of Green Energy. - : Informa UK Limited. - 1543-5075 .- 1543-5083. ; 13:6, s. 566-572
-
Tidskriftsartikel (refereegranskat)abstract
- Oil palm empty fruit bunch (OPEFB) is a potential raw material for production of lignocellulosic bioethanol. The OPEFB was pretreated with 8% sodium hydroxide (NaOH) solution at 100°C for 10 to 90 min. Enzymatic digestion was carried out using cellulase and β-glucosidase at 45°C for 24 h. It was then inoculated with Mucor indicus spores suspension and fermented under anaerobic conditions at 37°C for 96 h. Sodium hydroxide pretreatment effectively removed 51–57% of lignin in the OPEFB and also its hemicellulose (40–84%). The highest glucan digestibility (0.75 g/g theoretical glucose) was achieved in 40-min NaOH pretreatment. Fermentation by M. indicus resulted in 68.4% of the theoretical ethanol yield, while glycerol (16.2–83.2 mg/g), succinic acid (0–0.4 mg/g), and acetic acid (0–0.9 mg/g) were its by-products. According to these results, 11.75 million tons of dry OPEFB in Indonesia can be converted into 1.5 billion liters of ethanol per year.
|
|
| 6. |
- Dasa, Kris, 1989, et al.
(författare)
-
Inhibitory Effect of Long-Chain Fatty Acids on Biogas Production and the Protective Effect of Membrane Bioreactor
- 2016
-
Ingår i: BioMed Research International. - : Hindawi Limited. - 2314-6133 .- 2314-6141. ; 2016:ID:7263974, s. 9 pages-
-
Tidskriftsartikel (refereegranskat)abstract
- Anaerobic digestion of lipid-containing wastes for biogas production is often hampered by the inhibitory effect of long-chain fatty acids (LCFAs). In this study, the inhibitory effects of LCFAs (palmitic, stearic, and oleic acid) on biogas production as well as the protective effect of a membrane bioreactor (MBR) against LCFAs were examined in thermophilic batch digesters. The results showed that palmitic and oleic acid with concentrations of 3.0 and 4.5 g/L resulted in >50% inhibition on the biogas production, while stearic acid had an even stronger inhibitory effect. The encased cells in the MBR system were able to perform better in the presence of LCFAs. This system exhibited a significantly lower percentage of inhibition than the free cell system, not reaching over 50% at any LCFA concentration tested.
|
|
| 7. |
- Ferreira, Jorge A., et al.
(författare)
-
Spent sulphite liquor for cultivation of an edible Rhizopus sp.
- 2012
-
Ingår i: BioResources. - : North Carolina State University: College of Natural Resources. - 1930-2126. ; 7:1, s. 173-188
-
Tidskriftsartikel (refereegranskat)abstract
- Spent sulphite liquor, the major byproduct from the sulphite pulp production process, was diluted to 50% and used for production of an edible zygomycete Rhizopus sp. The focus was on production, yield, and composition of the fungal biomass composition. The fungus grew well at 20 to 40°C, but 32°C was found to be preferable compared to 20 and 40°C in terms of biomass production and yield (maximum of 0.16 g/g sugars), protein content (0.50-0.60 g/g), alkali-insoluble material (AIM) (ca 0.15 g/g), and glucosamine content (up to 0.30 g/g of AIM). During cultivation in a pilot airlift bioreactor, the yield increased as aeration was raised from 0.15 to 1.0 vvm, indicating a high demand for oxygen. After cultivation at 1.0 vvm for 84 h, high yield and production of biomass (up to 0.34 g/g sugars), protein (0.30-0.50 g/g), lipids (0.02-0.07 g/g), AIM (0.16-0.28 g/g), and glucosamine (0.22-0.32 g/g AIM) were obtained. The fungal biomass produced from spent sulphite liquor is presently being tested as a replacement for fishmeal in feed for fish aquaculture and seems to be a potential source of nutrients and for production of glucosamine.
|
|
| 8. |
- Forgács, Gergely, et al.
(författare)
-
Methane production from feather waste pretreated with Ca(OH)2: Process development and economical analysis
- 2014
-
Ingår i: Waste and Biomass Valorization. - : Springer Netherlands. - 1877-2641 .- 1877-265X. ; 5:1, s. 65-73
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigated the industrial application of feather waste as a substrate for anaerobic digestion. Feather was pretreated with 0–0.2 Ca(OH)2 g/g TSfeather (total solids of feathers) for 30–120 min at 100–120 °C, in order to increase the digestibility, and to enhance the methane yield in a subsequent digestion at 55 °C. Based on the results of the batch digestion, an industrial process was developed, which can achieve 0.40 Nm3/kg VSfeather (volatile solids of feathers) methane yield from the pretreated feathers, while it fulfills the animal by-product hygenization requirements as well. This base case of the industrial pretreatment process was designed using SuperPro Designer® for utilizing 2,500 tons of feathers per year, which is the waste stream from an average slaughterhouse with a capacity of 60,000 broilers per day. The production cost of the methane is estimated to be 0.475 EUR/Nm3, while the investments on the pretreatment unit requires 0.97 million EUR as total capital investment, and 0.25 million EUR/year for operating cost. However, the process is sensitive to the plant capacity. Changing the plant capacity from 625 to 10,000 tons of feather per year, results in reducing the biogas production cost from 1.177 to 0.203 EUR/Nm3. In addition, sensitivity analysis was performed on the base case to investigate the effect of the value of the incoming feather on the overall process profitability. The results showed that the proposed investment could be considered as being financially viable in the case of production of upgraded biomethane even without the current gate fee system.
|
|
| 9. |
- Gmoser, Rebecca, 1990-, et al.
(författare)
-
From stale bread and brewers spent grain to a new food source using edible filamentous fungi
- 2020
-
Ingår i: Bioengineered Bugs. - : Informa UK Limited. - 2165-5979 .- 2165-5987. ; 11:1, s. 582-598
-
Tidskriftsartikel (refereegranskat)abstract
- By-products from the food sector with a high load of organic matter present both a waste-handling problem related to expenses and to the environment, yet also an opportunity. This study aims to increase the value of stale bread and brewers spent grain (BSG) by re-introducing these residues to the food production chain by converting them to new protein-enriched products using the edible filamentous fungi Neurospora intermedia and Rhizopusoryzae. After 6 days of solid state fermentation (at 35°C, with a95% relative humidity and moisture content of 40% in the substrate) on stale bread, a nutrient-rich fungal-fermented product was produced. The total protein content, as analyzed by total amino acids, increased from 16.5% in stale sourdough bread to 21.1% (on dry weight basis) in the final product with an improved relative ratio of essential amino acids. An increase in dietary fiber, minerals (Cu, Fe, Zn) and vitamin E, as well as an addition of vitamin D2 (0.89 µg/g dry weight sample) was obtained compared with untreated stale bread. Furthermore, addition of BSG to the sourdough bread with the aim to improve textural changes after fermentation showed promising outcomes. Cultivation of N. intermedia or R. oryzae on stale sourdough bread mixed with 6.5% or 11.8% BSG, respectively, resulted in fungal-fermented products with similar textural properties to a commercial soybean burger. Bioconversion of stale bread and BSG by fungal solid state fermentation to produce a nutrient-enriched food product was confirmed to be a successful way to minimize food waste and protein shortage.
|
|
| 10. |
- Jafari, V., et al.
(författare)
-
Construction and demolition lignocellulosic wastes to bioethanol
- 2011
-
Ingår i: Renewable Energy. - : Elsevier BV. - 0960-1481 .- 1879-0682. ; 36:11, s. 2771-2775
-
Tidskriftsartikel (refereegranskat)abstract
- This work deals with conversion of four construction and demolition (C&D) lignocellulosic wastes including OSB, chipboard, plywood, and wallpaper to ethanol by separate enzymatic hydrolysis and fermentation (SHF). Similar to other lignocelluloses, the wastes were resistant to the enzymatic hydrolysis, in which only up to 7% of their cellulose was hydrolyzed. Therefore, the lignocellulosic wastes were treated with phosphoric acid, sodium hydroxide, or N-methylmorpholine-N-oxide (NMMO), which resulted in improving the subsequent enzymatic hydrolysis to 38.2-94.6% of the theoretical yield. The best performance was obtained after pretreatment by concentrated phosphoric acid, followed by NMMO. The pretreated and hydrolyzed C&D wastes were then successfully fermented by baker's yeast to ethanol with 70.5-84.2% of the theoretical yields. The results indicate the possibility of producing 160 ml ethanol from each kg of the C&D wastes at the best conditions.
|
|
