| 1. |
- Abou Nada, Fahd Jouda, et al.
(författare)
-
Remote temperature sensing on and beneath atmospheric plasma sprayed thermal barrier coatings using thermographic phosphors
- 2016
-
Ingår i: Surface & Coatings Technology. - : Elsevier BV. - 0257-8972 .- 1879-3347. ; 302, s. 359-367
-
Tidskriftsartikel (refereegranskat)abstract
- Investigations on remote temperature sensing of yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) at the surface and at the bond-coat/top-coat interface were carried out. Using Y2O3:Eu thermographic phosphor as an embedded temperature sensing layer, sub-surface temperature probing through 300 μm of atmospheric plasma sprayed YSZ is demonstrated. The Y2O3:Eu thermographic phosphor displays a temperature sensitivity ranging between 400 °C up to a maximum of 900 °C when utilizing the luminescence originating from the 611 nm emission band. Dysprosium stabilized zirconia (10 wt.% DySZ), a TBC material, is also investigated and established as a temperature sensor from 400 °C up to a temperature of 1000 °C using both the intensity decay time and emission intensity ratio methods. In addition, the luminescence of presumed optically inactive YSZ materials was spectroscopically investigated in terms of optical interferences caused by impurities. A validation temperature probing measurement through 300 μm of YSZ top-coat was successfully performed in a SGT-800 Siemens burner running at six different operating conditions in an atmospheric combustion rig.
|
|
| 2. |
- Adam, Christina, et al.
(författare)
-
Quality of nursing care as perceived by cancer patients : A cross-sectional survey in four European countries
- 2017
-
Ingår i: Journal of B.U.ON.. - 1107-0625. ; 22:3, s. 777-782
-
Forskningsöversikt (refereegranskat)abstract
- Purpose: To explore and compare cancer patients' perceptions on the quality of nursing care in four European countries. Methods: Data were collected in Cyprus, Finland, Greece and Sweden. The sample comprised 596 hospitalized cancer patients. The quality of nursing care was measured using the “Oncology Patients' Perceptions of the Quality of Nursing Care Scale” (OPPQNCS). Patient characteristics were also collected. Analysis of variance was used to examine the effects of country on the perceptions of the quality of nursing care. Results: Patients' age ranged from 18 to 86 years, and 58% were male. The comparison of cancer patients' perceptions regarding the quality of nursing care between the four countries showed a statistically significant difference in the total OPPQNCS scores (p<0.001) as well as in the subscales responsiveness (p<0.001), individualization (p<0.001), coordination (p<0.001) and proficiency (p<0.001). The Cronbach's alpha coefficient for the OPPQNCS ranged between 0.89 and 0.95. A multivariate analysis of variance for the OPPQNCS controlled by respondents' demographic characteristics revealed that only the patient's country was significantly related with the patients' perceptions of quality care. Conclusion: Quality of nursing care as perceived by cancer patients was high, but differed between the four countries. The impact of the clinical status of cancer patients on the quality of nursing care and managerial factors such as staffing/nursing care delivery models that influence the ability of nurses to offer high quality care should also be explored by more focused studies.
|
|
| 3. |
- Agic, Adnan, 1967-, et al.
(författare)
-
Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries
- 2019
-
Ingår i: International Journal on Interactive Design and Manufacturing. - : Springer Science and Business Media LLC. - 1955-2513 .- 1955-2505. ; 13:2, s. 557-565
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding the influence of the cutting edge geometry on the development of cutting forces during the milling process is of high importance in order to predict the mechanical loads on the cutting edge as well as the dynamic behavior on the milling tool. The work conducted in this study involves the force development over the entire engagement of a flute in milling, from peak force during the entry phase until the exit phase. The results show a significant difference in the behavior of the cutting process for a highly positive versus a highly negative cutting edge geometry. The negative edge geometry gives rise to larger force magnitudes and very similar developments of the tangential and radial cutting force. The positive cutting edge geometry produces considerably different developments of the tangential and radial cutting force. In case of positive cutting edge geometry, the radial cutting force increases while the uncut chip thickness decreases directly after the entry phase; reaching the peak value after a certain delay. The radial force fluctuation is significantly higher for the positive cutting edge geometry. The understanding of such behavior is important for modelling of the milling process, the design of the cutting edge and the interactive design of digital applications for the selection of the cutting parameters.
|
|
| 4. |
- Agic, Adnan, 1967-, et al.
(författare)
-
Experimental analysis of cutting edge effects on vibrations in end milling
- 2019
-
Ingår i: CIRP - Journal of Manufacturing Science and Technology. - : Elsevier BV. - 1755-5817 .- 1878-0016. ; 24, s. 66-74
-
Tidskriftsartikel (refereegranskat)abstract
- The ability to minimize vibrations in milling by the selection of cutting edge geometry and appropriate cutting conditions is an important asset in the optimization of the cutting process. This paper presents a measurement method and a signal processing technique to characterize and quantify the magnitude of the vibrations in an end milling application. Developed methods are then used to investigate the effects of various cutting edge geometries on vibrations in end milling. The experiments are carried out with five cutting edge geometries that are frequently used in machining industry for a wide range of milling applications. The results show that a modest protection chamfer combined with a relatively high rake angle has, for the most of cutting conditions, a reducing effect on vibration magnitudes. Furthermore, dynamics of a highly positive versus a highly negative cutting geometry is explored in time domain and its dependency on cutting conditions is presented. The results give concrete indications about the most optimal cutting edge geometry and cutting conditions in terms of dynamic behavior of the tool.
|
|
| 5. |
- Agic, Adnan, 1967-, et al.
(författare)
-
Influence of cutting edge geometry on force build-up process in intermittent turning
- 2016
-
Ingår i: Procedia CIRP. - : Elsevier BV. - 2212-8271 .- 2212-8271. ; 46, s. 364-367
-
Tidskriftsartikel (refereegranskat)abstract
- In the intermittent turning and milling processes, during the entry phase the cutting edges are subjected to high impact loads that can give rise to dynamical and strength issues which in general cause tool life reduction. In this study the effect of geometrical features of the cutting tool on the force generation during the entry phase is investigated. Cutting forces are measured by a stiff dynamometer at a high sampling frequency. In addition, the chip load area is analyzed and related to the measured cutting force. The results show that micro-geometrical features, in particular the protection chamfer, significantly affect the force generation during the entry phase.
|
|
| 6. |
- Agic, Adnan, 1967-, et al.
(författare)
-
Influence of radial depth of cut on entry conditions and dynamics in face milling application
- 2017
-
Ingår i: Journal of Superhard Materials. - New York : Allerton Press. - 1063-4576 .- 1934-9408. ; 39:4, s. 259-270
-
Tidskriftsartikel (refereegranskat)abstract
- The choice of milling cutter geometry and appropriate cutting data for certain milling application is of vital importance for successful machining results. Unfavorable selection of cutting conditions might give rise to high load impacts that cause severe cutting edge damage. Under some circumstances the radial depth of cut in combination with milling cutter geometry might give unfavorable entry conditions in terms of cutting forces and vibration amplitudes. This phenomenon is originated from the geometrical features that affect the rise time of the cutting edge engagement into workpiece at different radial depths of cut. As the radial depth of cut is often an important parameter, particularly when machining difficult-to-cut materials, it is important to explore the driving mechanism behind vibrations generation. In this study, acceleration of the workpiece is measured for different radial depths of cut and cutting edge geometries. The influence of the radial depth of cut on the dynamical behavior is evaluated in time and frequency domains. The results for different radial depths of cut and cutting geometries are quantified using the root mean square value of acceleration. The outcome of this research study can be used both for the better cutting data recommendations and improved tool design.
|
|
| 7. |
- Alabaf, Setareh, et al.
(författare)
-
Physical health in children with neurodevelopmental disorders
- 2019
-
Ingår i: Journal of autism and developmental disorders. - : Springer Science and Business Media LLC. - 0162-3257 .- 1573-3432. ; 49:1, s. 83-95
-
Tidskriftsartikel (refereegranskat)abstract
- With increasing numbers of children being diagnosed with neurodevelopmental disorders (NDDs) attention has been drawn to these children's physical health. We aimed to identify the prevalence of defined physical problems (epilepsy, migraine, asthma, cancer, diabetes, psoriasis, lactose intolerance, celiac disease, diarrhea, constipation, daytime enuresis, encopresis) in a nationwide population of 9- and 12-year-old twins subdivided into those with and without indications of NDDs. Parents of 28,058 twins participated in a well-validated telephone interview regarding their children's mental health and answered questions about their physical problems. The results indicate a high rate of physical problems in children with NDDs, particularly in those with indications of the presence of combinations of several NDDs.
|
|
| 8. |
- Andersson, Anton, et al.
(författare)
-
Testing the personality differentiation by intelligence hypothesis in a representative sample of Swedish hexagenerians
- 2022
-
Ingår i: Journal of Research in Personality. - : Elsevier BV. - 0092-6566 .- 1095-7251. ; 99
-
Tidskriftsartikel (refereegranskat)abstract
- The Personality Differentiation by Intelligence Hypothesis (PDIH) predicts larger trait-variances, and smaller across-trait covariances for individuals with higher intelligence. We tested these predictions using multiple-group confirmatory factor analyses (MG-CFA), while controlling for the potential confound of systematic method variance related to reversed items using a correlated trait, correlated method (CTCM) approach. Participants between the ages of 62 and 68 completed measures of personality (Mini-IPIP: Donnellan et al., 2006) and intelligence (Raven APM-12: Arthur & Day, 1994). After establishing strict measurement invariance (MI), we found no support for larger variances, and only minor support for lower trait covariances as related to higher intelligence. Overall, the findings provide scant support for the PDIH when controlling for systematic method variance.
|
|
| 9. |
- Andersson, Susanne, et al.
(författare)
-
Attitudes Regarding Participation in a Diabetes Screening Test among an Assyrian Immigrant Population in Sweden
- 2016
-
Ingår i: Nursing Research and Practice. - : Hindawi Limited. - 2090-1429 .- 2090-1437.
-
Tidskriftsartikel (refereegranskat)abstract
- Immigrants from the Middle East have higher prevalence and incidence of type 2 diabetes (T2D) compared with native Swedes. The aim of the study was to describe and understand health beliefs in relation to T2D as well as attitudes regarding participation in a screening process in a local group of Assyrian immigrants living in Sweden. A qualitative and quantitative method was chosen in which 43 individuals participated in a health check-up and 13 agreed to be interviewed. Interviews were conducted, anthropometric measurements and blood tests were collected, and an oral glucose tolerance test was performed. In total, 13 of the 43 participants were diagnosed with impaired glucose metabolism, 4 of these 13 had TD2. The interviewed participants perceived that screening was an opportunity to discover more about their health and to care for themselves and their families. Nevertheless, they were not necessarily committed to taking action as a consequence of the screening. Instead, they professed that their health was not solely in their own hands and that they felt safe that God would provide for them. Assyrians' background and religion affect their health beliefs and willingness to participate in screening for TD2.
|
|
| 10. |
- André, Frida, et al.
(författare)
-
Relapse prevention therapy for internet gaming disorder in Swedish child and adolescent psychiatric clinics : a randomized controlled trial
- 2023
-
Ingår i: Frontiers in Psychiatry. - 1664-0640. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: To evaluate the effectiveness of relapse prevention (RP) as a treatment for internet gaming disorder (IGD).Design: Randomized controlled trial.Setting: Three child and adolescent psychiatry (CAP) units in Region Skåne, Sweden.Participants: Children aged 13-18 years, coming for their first visit to CAP during 2022, were screened for gaming behavior. Those who met the proposed DSM-5 criteria for IGD were offered participation in the trial, if they had the capacity to provide written informed consent and if they spoke Swedish. A total of 111 CAP patients agreed to participate. Out of those, 11 patients were excluded due to incorrect inclusion such as young age (n = 1), or due to the absence of responses to follow-up measures (n = 9). After exclusion, 102 participants remained (intervention = 47, control = 55).Interventions: The intervention, RP, is based on cognitive behavioral treatment (CBT) and was provided individually, comprising of five to seven 45-min sessions over a period of 5 to 7 weeks versus treatment as usual.Outcome measures: Participants were assessed with Game Addiction Scale for Adolescents pre-treatment (GASA) (baseline), post-treatment (treatment group only), and 3 months after baseline (follow-up).Results: The repeated measures ANOVA showed a significant interaction effect between treatment and time. Both the control group and treatment group lowered their mean GASA score from baseline to follow-up significantly, but the improvement was greater in the treatment group (mean difference in control group -5.1, p < 0.001, 95% CI = - 3.390 to -6.755, mean difference in treatment group -9.9, p < 0.001, 95% CI = -11.746 to -8.105).Conclusion: RP was found to be superior to treatment as usual in terms of reduction of IGD symptoms. Future research should address which aspects within a given treatment are effective, who benefits from treatment, in what aspects, and why.
|
|
