| 1. |
- Ail, Ujwala, 1980-, et al.
(författare)
-
Optimization of Non-Pyrolyzed Lignin Electrodes for Sustainable Batteries
- 2023
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin, a byproduct from the pulp industry, is one of the redox active biopolymers being investigated as a component in the electrodes for sustainable energy storage applications. Due to its insulating nature, it needs to be combined with a conductor such as carbon or conducting polymer for efficient charge storage. Here, the lignin/carbon composite electrodes manufactured via mechanical milling (ball milling) are reported. The composite formation, correlation between performance and morphology is studied by comparison with manual mixing and jet milling. Superior charge storage capacity with approximate to 70% of the total contribution from the Faradaic process involving the redox functionality of lignin is observed in a mechanically milled composite. In comparison, manual mix shows only approximate to 30% from the lignin storage participation while the rest is due to the electric double layer at the carbon-electrolyte interface. The significant participation of lignin in the ball milled composite is attributed to the homogeneous, intimate mixing of the carbon and the lignin leading the electronic carrier transported in the carbon phase to reach most of the redox group of lignin. A maximum capacity of 49 mAh g(-1) is obtained at charge/discharge rate of 0.25 A g(-1) for the sample milled for 60 min.
|
|
| 2. |
- Balagula, Roman, et al.
(författare)
-
Effects of thermal annealing on localization and strain in core/multishell GaAs/GaNAs/GaAs nanowires
- 2020
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- Core/shell nanowire (NW) heterostructures based on III-V semiconductors and related alloys are attractive for optoelectronic and photonic applications owing to the ability to modify their electronic structure via bandgap and strain engineering. Post-growth thermal annealing of such NWs is often involved during device fabrication and can also be used to improve their optical and transport properties. However, effects of such annealing on alloy disorder and strain in core/shell NWs are not fully understood. In this work we investigate these effects in novel core/shell/shell GaAs/GaNAs/GaAs NWs grown by molecular beam epitaxy on (111) Si substrates. By employing polarization-resolved photoluminescence measurements, we show that annealing (i) improves overall alloy uniformity due to suppressed long-range fluctuations in the N composition; (ii) reduces local strain within N clusters acting as quantum dot emitters; and (iii) leads to partial relaxation of the global strain caused by the lattice mismatch between GaNAs and GaAs. Our results, therefore, underline applicability of such treatment for improving optical quality of NWs from highly-mismatched alloys. They also call for caution when using ex-situ annealing in strain-engineered NW heterostructures.
|
|
| 3. |
|
|
| 4. |
- Beyer, Jan, et al.
(författare)
-
Effects of a longitudinal magnetic field on spin injection and detection in InAs/GaAs quantum dot structures
- 2012
-
Ingår i: Journal of Physics. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 24:14, s. 145304-
-
Tidskriftsartikel (refereegranskat)abstract
- Effects of a longitudinal magnetic field on optical spin injection and detection in InAs/GaAs quantum dot (QD) structures are investigated by optical orientation spectroscopy. An increase in optical and spin polarization of the QDs is observed with increasing magnetic field in the range of 0-2 T, and is attributed to suppression of exciton spin depolarization within the QDs that is promoted by hyperfine interaction and anisotropic electron-hole exchange interaction. This leads to a corresponding enhancement in spin detection efficiency of the QDs by a factor of up to 2.5. At higher magnetic fields when these spin depolarization processes are quenched, electron spin polarization in anisotropic QD structures (such as double QDs that are preferably aligned along a specific crystallographic axis) still exhibits rather strong field dependence under non-resonant excitation. In contrast, such field dependence is practically absent in more "isotropic" QD structures (e.g. single QDs). We attribute the observed effect to stronger electron spin relaxation in the spin injectors (i.e. wetting layer and GaAs barriers) of the lower-symmetry QD structures, which also explains the lower spin injection efficiency observed in these structures.
|
|
| 5. |
|
|
| 6. |
- Beyer, Jan, 1980-, et al.
(författare)
-
Efficiency of spin injection in novel InAs quantum dotstructures: exciton vs. free carrier injection
- 2010
-
Konferensbidrag (refereegranskat)abstract
- Unambiguous experimental evidence for a significant difference in efficiency of excitonic vs. free carrier spin injection is provided in novel laterally arranged self-assembled InAs/GaAs quantum dot structures, from optical orientation and tunable laser spectroscopy. A lower efficiency of exciton spin injection as compared to free carrier spin injection from wetting layers into QDs results in a distinct feature in luminescence polarization of the QDs as a function of excitation photon energy. It is shown that this difference is not related to carrier density and state-filling effects arising from the difference in optical absorption efficiency between the excitons and free carriers. Rather, it is a genuine property for exciton spin injection that suffers stronger spin relaxation due to Coulomb exchange interaction.
|
|
| 7. |
- Beyer, Jan, 1980-, et al.
(författare)
-
Free-carriers beat excitons in spin-injection contest
- 2009
-
Annan publikation (populärvet., debatt m.m.)abstract
- Quantum dots (QDs) are a promising building block for future spin-functional devices with applications in spintronics and quantum information processing. Essential to the success of these devices is the ability to create a desired spin orientation of charge carriers (electrons and holes) in QDs via the injection of spin-polarized carriers. Researchers have now shown that this can be done most efficiently using independent (free) carriers rather than electron-hole pairs (excitons).
|
|
| 8. |
- Beyer, Jan, et al.
(författare)
-
Hanle effect and electron spin polarization in InAs/GaAs quantum dots up to room temperature
- 2012
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 23:13, s. 135705-
-
Tidskriftsartikel (refereegranskat)abstract
- Hanle effect in InAs/GaAs quantum dots (QDs) is studied under optical orientation as a function of temperature over the range of 150-300 K, with the aim to understand the physical mechanism responsible for the observed sharp increase of electron spin polarization with increasing temperature. The deduced spin lifetime Ts of positive trions in the QDs is found to be independent of temperature, and is also insensitive to excitation energy and density. It is argued that the measured Ts is mainly determined by the longitudinal spin flip time (T1) and the spin dephasing time (T2 *) of the studied QD ensemble, of which both are temperatureindependent over the studied temperature range and the latter makes a larger contribution. The observed sharply rising of the QD spin polarization degree with increasing temperature, on the other hand, is shown to be induced by an increase in spin injection efficiency from the barrier/wetting layer and also by a moderate increase in spin detection efficiency of the QD.
|
|
| 9. |
|
|
| 10. |
|
|
