| 1. |
- Abadei, S., et al.
(författare)
-
Microwave properties of tunable capacitors basee on magnetron sputtered ferroelectric Na0.5K0.5NbO3 film on low and high resistivity silicon substrates
- 2001
-
Ingår i: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 39:1-4, s. 359-366
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this work, small signal DC voltage dependent dielectric permittivity, loss tangent, and tuneability of magnetron sputtered epitaxial Na0.5K0.5NO3 films are studied experimentally. (100)-oriented Na0.5K0.5NbO3 films are deposited onto SiO2-buffered CMOS grade low resistivity (p = 10-20 cm) and high resistivity (p = 15-45 kcm) silicon substrates. Planar capacitors with 2 or 4 m gaps between electrodes have been fabricated on top of ferroelectric films. These devices have been characterized in the frequency range 1.0 MHz to 50 GHz at temperatures 30 - 300K. Na0.5K0.5NbO3/SiO2/Si structures on high resistivity silicon substrate exhibit C-V performances typical for Metal-Insulator- Semiconductor (MIS) capacitors. At low frequencies, f 1.0 GHz, the large tuneability and large losses are associated with the MIS structure, while at higher microwave frequencies the tuneability is mainly associated with the ferroelectric, film. At 1.0 MHz and room temperature, the tuneability of Na0.5K0.5NbO3/SiO2/Si structures more than 90%, reducing to 10-15 % at 50 GHz. The losses decrease with increasing the DC bias and frequency. A Q-factor more than 15 at 50 GHz is observed. The dielectric permittivity of the Na0.5K0.5NbO3 film is in the range 50-150 at frequencies 0.045-50 GHz. On low resistivity substrate the performance of Na0.5K0.5NbO3 films is completely screened by the high losses in silicon, and the tuneability is negligible. © 2001 Taylor and Francis.
|
|
| 2. |
- Abele, H., et al.
(författare)
-
Particle physics at the European Spallation Source
- 2023
-
Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
-
Forskningsöversikt (refereegranskat)abstract
- Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
|
|
| 3. |
|
|
| 4. |
- Ahlborg, Helene, 1980, et al.
(författare)
-
Provision of electricity to African households : The importance of democracy and institutional quality
- 2015
-
Ingår i: Energy Policy. - : Elsevier BV. - 0301-4215 .- 1873-6777. ; 87, s. 125-135
-
Tidskriftsartikel (refereegranskat)abstract
- How can differences in per capita household electricity consumption across African countries be understood? Based on theories that highlight the importance of democracy and institutional quality for provision of public goods, the aim of the paper is to analyse the degree to which the level of per capita household electricity consumption in African countries can be attributed to the countries’ democratic status and their institutional quality. We rely on regression analysis employing a pooled data set for 44 African countries over the time period 1996–2009. The analysis shows that democracy and institutional quality both have significant positive effects on per capita household consumption of electricity. Our results have implications for how energy sector reforms are promoted in developing countries. At a more general level they illustrate that institution-building policy efforts are relevant also in areas where contemporary debates have tended to primarily centre on economic development, financial prerequisites and ownership issues.
|
|
| 5. |
- Ahlström, Johan, 1990, et al.
(författare)
-
Economic potential for substitution of fossil fuels with liquefied biomethane in Swedish iron and steel industry – Synergy and competition with other sectors
- 2020
-
Ingår i: Energy Conversion and Management. - : Elsevier Ltd. - 0196-8904 .- 1879-2227. ; 209
-
Tidskriftsartikel (refereegranskat)abstract
- In Sweden, the iron and steel industry (ISI) is a major source of greenhouse gas (GHG) emissions. Most of the emissions result from the use of fossil reducing agents. Nevertheless, the use of fossil fuels for other purposes must also be eliminated in order to reach the Swedish emissions reduction targets. In this study, we investigate the possibility to replace fossil gaseous and liquid fuels used for heating in the ISI, with liquefied biomethane (LBG) produced through gasification of forest residues. We hypothesize that such utilization of fuels in the Swedish ISI is insufficient to independently drive the development of large-scale LBG production, and that other sectors demanding LBG, e.g., for transportation, can be expected to influence the economic potential for the ISI to switch to LBG. The paper investigates how demand for LBG from other sectors can contribute to, or prevent, a phase-out of fossil fuels used for heating purposes in the ISI under different future energy market scenarios, with additional analysis of the impact of a CO2 emissions charge. A geographically explicit cost-minimizing biofuel production localization model is combined with heat integration and energy market scenario analysis. The results show that from a set of possible future energy market scenarios, none yielded more than a 9% replacement of fossil fuels used for heating purposes in the ISI, and only when there was also a demand for LBG from other sectors. The scenarios corresponding to a more ambitious GHG mitigation policy did not achieve higher adoption of LBG, due to corresponding higher biomass prices. A CO2 charge exceeding 200 EUR/tonCO2 would be required to achieve a full phase-out of fossil fuels used for heating purposes in the ISI. We conclude that with the current policy situation, substitution of fossil fuels by LBG will not be economically feasible for the Swedish ISI.
|
|
| 6. |
- Ahlström, Johan, et al.
(författare)
-
Value chains for integrated production of liquefied bio-SNG at sawmill sites – Techno-economic and carbon footprint evaluation
- 2017
-
Ingår i: Applied Energy. - : Elsevier BV. - 0306-2619 .- 1872-9118. ; 206, s. 1590-1608
-
Tidskriftsartikel (refereegranskat)abstract
- Industry's increasing demand for liquefied natural gas could be met in the future by liquefied methane produced from biomass feedstock (LBG - liquefied biogas). This study presents results from an investigation of value chains for integrated production of LBG at a generic sawmill site, based on gasification of sawmill waste streams and forest residues. The objective was to investigate the cost for, as well as the carbon footprint reduction associated with, production and use of LBG as a fuel. Five different LBG plant sizes were investigated in combination with three different sawmill sizes. The resulting cases differ regarding biomass feedstock composition, biomass transportation distances, LBG plant sizes, how efficiently the excess heat from the LBG plant is used, and LBG distribution distances. Pinch technology was used to quantify the heat integration opportunities and to design the process steam network. The results show that efficient use of energy within the integrated process has the largest impact on the performance of the value chain in terms of carbon footprint. The fuel production cost are mainly determined by the investment cost of the plant, as well as feedstock transportation costs, which mainly affects larger plants. Production costs are shown to range from 68 to 156 EUR/MW hfuel and the carbon footprint ranges from 175 to 250 kg GHG-eq/MW hnet biomass assuming that the product is used to substitute fossil LNG fuel. The results indicate that process integration of an indirect biomass gasifier for LBG production is an effective way for a sawmill to utilize its by-products. Integration of this type of biorefinery can be done in such a way that the plant can still cover its heating needs whilst expanding its product portfolio in a competitive way, both from a carbon footprint and cost perspective. The results also indicate that the gains associated with efficient heat integration are important to achieve an efficient value chain.
|
|
| 7. |
- Ahmed, Mukhtiar, et al.
(författare)
-
Aromatic Heterocyclic Anion Based Ionic Liquids and Electrolytes
- 2023
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 25:4, s. 3502-3512
-
Tidskriftsartikel (refereegranskat)abstract
- Five new ionic materials comprising fluorine-free aromatic heterocyclic anions based on pyridine and pyrazine combined with a common n-tetrabutylphosphonium cation, (P4444)+, result in two room temperature ionic liquids (RTILs), one semi-solid, and two organic ionic plastic crystals (OIPCs) with melting points >20 °C. The OIPCs showed a plastic crystalline phase, multiple solid–solid transitions, and plastic crystalline and melt phases. For both the neat RTILs and the Li+ conducting electrolytes, the nature and strength of the ion–ion interactions mainly depend on the position of the nitrogen atom with respect to the carboxylate group in the anions. Furthermore, for the RTILs the ionic conductivity is effected by the electronic structure and flexibility of the ions and the anions diffuse faster than the (P4444)+ cation, but are slowed down in the electrolytes due to the strong electrostatic interactions between the carboxylate group of the anions and the Li+, as shown both experimentally and computationally. Overall, this study describes the effect of structural tuning of aromatic anions on the ion–ion interactions and introduces new ionic materials with promising properties to be used as solid and liquid electrolytes in energy storage devices.
|
|
| 8. |
- Ahmed, Mukhtiar, et al.
(författare)
-
Ionic Liquids and Electrolytes with Flexible Aromatic Anions
- 2023
-
Ingår i: Chemistry - A European Journal. - : John Wiley & Sons. - 0947-6539 .- 1521-3765. ; 29:41
-
Tidskriftsartikel (refereegranskat)abstract
- Five new n-tetrabutylphosphonium (P4444)+ cation based ionic liquids (ILs) with oligoether substituted aromatic carboxylate anions have been synthesized. The nature and position of the oligoether chain affect thermal stability (up to 330 ºC), phase behaviour (Tg < -55 ºC) and ion transport. Furthermore, with the aim of application in lithium batteries, electrolytes were created for two of the ILs by 10 mol% doping using the corresponding Li-salts. This affects the ion diffusion negatively, from being higher and equal for cations and anions to lower for all ions and unequal. This is due to the stronger ionic interactions and formation of aggregates, primarily between the Li+ ions and the carboxylate group of the anions. Electrochemically, the electrolytes have electrochemical stability windows up to 3.5 V, giving some promise for battery application.
|
|
| 9. |
- Ahmed, Mukhtiar, et al.
(författare)
-
Pyrrolidium- and Imidazolium-Based Ionic Liquids and Electrolytes with Flexible Oligoether Anions
- 2024
-
Ingår i: ChemPhysChem. - : John Wiley & Sons. - 1439-7641 .- 1439-4235. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- A new class of fluorine-free ionic liquids (ILs) and electrolytes based on aliphatic flexible oligoether anions, 2-(2-methoxyethoxy)acetate (MEA) and 2-[2-(2-methoxyethoxy)ethoxy]acetate (MEEA), coupled with pyrrolidinium and imidazolium cations is introduced. For the ILs with MEEA anions, Li+ conducting electrolytes are created by doping the ILs with 30 mol % of LiMEEA. The structural flexibility of the oligoether functionality in the anion results in glass transition temperatures (Tg) as low as −60 °C for the neat ILs and the electrolytes. The imidazolium-based ILs and electrolytes reveal better thermal stabilities but higher Tg and lower electrochemical stabilities than the corresponding pyrrolidinium-based analogues. All neat ILs show comparable transport properties for the cations and these decrease by the addition of lithium salt – the pyrrolidinium-based electrolyte being affected the most.
|
|
| 10. |
- Aires, F., et al.
(författare)
-
Microwave hyperspectral measurements for temperature and humidity atmospheric profiling from satellite: The clear-sky case
- 2015
-
Ingår i: Journal of Geophysical Research. - 0148-0227 .- 2156-2202 .- 2169-897X .- 2169-8996. ; 120:21, s. 11334-11351
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the benefits of a satellite HYperspectral Microwave Sensor (HYMS) for the retrieval of atmospheric temperature and humidity profiles, in the context of numerical weather prediction (NWP). In the infrared, hyperspectral instruments have already improved the accuracy of NWP forecasts. Microwave instruments so far only provide observations for a limited number of carefully selected channels. An information content analysis is conducted here to assess the impact of hyperspectral microwave measurements on the retrieval of temperature and water vapor profiles under clear-sky conditions. It uses radiative transfer simulations over a large variety of atmospheric situations. It accounts for realistic observation (instrument and radiative transfer) noise and for a priori information assumptions compatible with NWP practices. The estimated retrieval performance of the HYMS instrument is compared to those of the microwave instruments to be deployed on board the future generation of European operational meteorological satellites (MetOp-SG). The results confirm the positive impact of a HYMS instrument on the atmospheric profiling capabilities compared to MetOp-SG. Temperature retrieval uncertainty, compared to a priori information, is reduced by 2 to 10%, depending on the atmospheric height, and improvement rates are much higher than what will be obtained with MetOp-SG. For humidity sounding these improvements can reach 30%, a significant benefit as compared to MetOp-SG results especially below 250 hPa. The results are not very sensitive to the instrument noise, under our assumptions. The main impact provided by the hyperspectral information originates from the higher resolution in the O2 band around 60 GHz. The results are presented over ocean at nadir, but similar conclusions are obtained for other incidence angles and over land. Key Points A hyperspectral MW instrument could improve temperature & humidity retrieval compared to MetOp-SG The main impact from HYMS comes from higher resolution in the O2 band around 60 GHz Hyperspectral information is not really sensitive to instrument noise.
|
|
