| 1. |
- Bergkvist, Bo, et al.
(författare)
-
Pools and fluxes of carbon in three Norway spruce ecosystems along a climatic gradient in Sweden
- 2008
-
Ingår i: Biogeochemistry. - : Springer Science and Business Media LLC. - 0168-2563 .- 1573-515X. ; 89:1, s. 7-25
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents an integrated analysis of organic carbon (C) pools in soils and vegetation, within-ecosystem fluxes and net ecosystem exchange (NEE) in three 40-year old Norway spruce stands along a north-south climatic gradient in Sweden, measured 2001-2004. A process-orientated ecosystem model (CoupModel), previously parameterised on a regional dataset, was used for the analysis. Pools of soil organic carbon (SOC) and tree growth rates were highest at the southernmost site (1.6 and 2.0-fold, respectively). Tree litter production (litterfall and root litter) was also highest in the south, with about half coming from fine roots (< 1 mm) at all sites. However, when the litter input from the forest floor vegetation was included, the difference in total litter input rate between the sites almost disappeared (190-233 g C m(-2) year(-1)). We propose that a higher N deposition and N availability in the south result in a slower turnover of soil organic matter than in the north. This effect seems to overshadow the effect of temperature. At the southern site, 19% of the total litter input to the O horizon was leached to the mineral soil as dissolved organic carbon, while at the two northern sites the corresponding figure was approx. 9%. The CoupModel accurately described general C cycling behaviour in these ecosystems, reproducing the differences between north and south. The simulated changes in SOC pools during the measurement period were small, ranging from -8 g C m(-2) year(-1) in the north to +9 g C m(-2) year(-1) in the south. In contrast, NEE and tree growth measurements at the northernmost site suggest that the soil lost about 90 g C m(-2) year(-1).
|
|
| 2. |
- Holtermann, Andreas, et al.
(författare)
-
A practical guidance for assessments of sedentary behavior at work: A PEROSH initiative
- 2017
-
Ingår i: Applied Ergonomics. - : Elsevier BV. - 0003-6870 .- 1872-9126. ; 63, s. 41-52
-
Tidskriftsartikel (refereegranskat)abstract
- Sedentary behavior is defined as sitting or lying with low energy expenditure. Humans in industrialized societies spend an increasing amount of time in sedentary behaviors every day. This has been associated with detrimental health outcomes. Despite a growing interest in the health effects of sedentary behavior at work, associations remain unclear, plausibly due to poor and diverse methods for assessing sedentary behavior. Thus, good practice guidance for researchers and practitioners on how to assess occupational sedentary behavior are needed. The aim of this paper is to provide a practical guidance for practitioners and researchers on how to assess occupational sedentary behavior. Ambulatory systems for use in field applications (wearables) are a promising approach for sedentary behavior assessment. Many different small-size consumer wearables, with long battery life and high data storage capacity are commercially available today. However, no stand-alone commercial system is able to assess sedentary behavior in accordance with its definition. The present paper offers decision support for practitioners and researchers in selecting wearables and data collection strategies for their purpose of study on sedentary behavior. Valid and reliable assessment of occupational sedentary behavior is currently not easy. Several aspects need to be considered in the decision process on how to assess sedentary behavior. There is a need for development of a cheap and easily useable wearable for assessment of occupational sedentary behavior by researchers and practitioners
|
|
| 3. |
- Jonsson, Oskar, et al.
(författare)
-
CONSUMER PERCEPTIONS AND PREFERENCES ON SOLID WOOD, WOOD-BASED PANELS, AND COMPOSITES : A REPERTORY GRID STUDY
- 2008
-
Ingår i: Wood and Fiber Science. - 0735-6161. ; 40:4, s. 663-678
-
Tidskriftsartikel (refereegranskat)abstract
- Knowledge about consumer perception and preferences on solid wood, wood-based panels, and wood-based composites is important for product development and marketing. The aim of this study was to identify attributes and associations that people use to describe different types of wood materials and to explore how they relate to preferences. The study involved nine samples that were evaluated with the Kelly's repertory grid technique and content analysis. Based on respondents' answers. 19 core categories reflecting sample attributes were extracted. General preferences for each sample were also recorded. Principal component analysis generated two factors describing 1) naturalness, wood-likeness, softness, unprocessed origin, living, pleasant, and high value; and 2) solid and homogeneous impression. A third, preliminary factor included categories describing irregular pattern,sleekness, and smoothness. The wood samples were most liked, whereas composites and panels were not appreciated. Preferred core categories were naturalness, wood-likeness, smoothness, living impression, and value. The least liked core categories were processed, hard, and high weigh. The implications of the results for product development and marketing are discussed.
|
|
| 4. |
- Lindahl, Lars, et al.
(författare)
-
Intermediaries and intervenients in normative systems
- 2008
-
Ingår i: Journal of Applied Logic. - : Elsevier BV. - 1570-8683 .- 1570-8691. ; 6:2, s. 229-250
-
Tidskriftsartikel (refereegranskat)abstract
- Many concepts in legal texts are “intermediaries”, in the sense that they serve as links between statements of legal grounds, on one hand, and of legal consequences, on the other. In our paper, an algebraic representation of normative systems is used for distinguishing between different kinds of intermediaries and making the idea of a joining between grounds and consequences more precise. In Section 1, the idea of intermediaries is presented and earlier discussions of the subjects are outlined. In Section 2, we introduce the algebraic framework and develop the formal theory. After introducing our approach to the representation of a normative system, we here present a theory of “intervenients”, seen as a tool for analysing intermediaries. In Section 3, dealing with applications, after presenting a model of the formal theory, suited for the analysis of concepts in normative systems, we apply the theory to a number of examples, introduced in the first part. Finally, in Section 4, we make some remarks on the methodology of intermediate concepts.
|
|
| 5. |
- Lindahl, Lars, et al.
(författare)
-
Normative positions within an algebraic approach to normative systems
- 2004
-
Ingår i: Journal of Applied Logic. - : Elsevier BV. - 1570-8683 .- 1570-8691. ; 2:1, s. 63-91
-
Tidskriftsartikel (refereegranskat)abstract
- The formal analysis of normative systems as initiated by Alchourrón and Bulygin can be complemented by the analysis of normative positions as pursued by Kanger, Lindahl, Sergot and Jones. The paper is a step towards integrating the two approaches within an algebraic theory of so-called Boolean quasi-orderings (Bqo's). In the general Bqo theory presented, a number of theoretical tools are introduced and elucidated by theorems, in particular those of fragment, connection, coupling and pair coupling. Condition implication structures (cis's) are models of the Bqo theory used for the representation of normative systems. A system of normative positions is introduced as a special kind of cis. The final section is devoted to an example exhibiting a legal mini-system where a cis of normative positions (np-cis) is joined to a descriptive cis.
|
|
| 6. |
- Lindahl, Lars, et al.
(författare)
-
Normative systems and their revision: an algebraic approach
- 2003
-
Ingår i: Artificial Intelligence and Law. ; 11:2-3, s. 81-104
-
Tidskriftsartikel (refereegranskat)abstract
- The paper discusses normative systems and their revision within an algebraic framework. If a system is logically well-formed, certain norms, called connecting norms, determine the system as a whole. It is maintained that, if the system is well-formed, a relation at least as low as determines a lattice or quasi-lattice of its connecting norms. The ideas are presented mainly in the form of comments on a legal example concerning acquisition of movable property by extinction of another person's previous rights.
|
|
| 7. |
- Lindahl, Lars, et al.
(författare)
-
Strata of intervenient concepts in normative systems
- 2008
-
Ingår i: Lecture Notes in Artificial Intelligence, LNAI. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0302-9743 .- 1611-3349. - 3540705244 - 9783540705246 ; LNAI 5076, s. 203-217
-
Konferensbidrag (refereegranskat)abstract
- In a legal system, there are different strata of concepts exhibiting the pattern of a network. Our paper presents an algebraic representation of legal concepts as intermediate between factual events and circumstances on one hand, and deontic positions, on the other. In this representation, we use the notion of "intervenient" as a theoretical tool, defining intervenients in terms of weakest grounds and strongest consequences. Important features of intervenients are different kinds of "minimality", since minimality is relevant for the effective formulation of a normative system, as well as for changes in such a system. By distinguishing different kinds of minimality, a rudimentary typology of intervenients is obtained. The results are illustrated by a legal example concerning "ownership" as an intermediate concept.
|
|
| 8. |
- Rosa, Eduardo, et al.
(författare)
-
Cognitive performance, fatigue, emotional, and physiological strains in simulated long-duration flight missions
- 2022
-
Ingår i: Military Psychology. - : Informa UK Limited. - 0899-5605 .- 1532-7876. ; 34:2, s. 224-236
-
Tidskriftsartikel (refereegranskat)abstract
- Pilots in long-duration flight missions in single-seat aircraft may be affected by fatigue. This study determined associations between cognitive performance, emotions and physiological activation and deactivation–measured by heart rate variability (HRV)–in a simulated 11-h flight mission in the 39 Gripen aircraft. Twelve participants volunteered for the study. Perceived fatigue was measured by the Samn-Perelli Fatigue Index (SPFI). Cognitive performance was measured by non-executive and executive tasks. Emotions were assessed by the Circumplex Affect Space instrument. HRV was considered in relation to the cognitive tasks in four time points–Hours 3, 5, 7, 9–and their associations with emotional ratings. Results indicated a decrease in performance in the non-executive task after approximately 7 h. This result was correlated with self-reported measures of fatigue. HRV, assessed by indices of parasympathetic modulation, remained unchanged for both non-executive and executive tasks over time (p >.05 for all). Significant correlations were observed between emotions and HRV; with increased boredom, increased passiveness, decreased stimulation, and decreased activeness, HRV indicators increased (p <.05). This suggests that a low self-regulatory effort for maintaining performance in these conditions was prevalent and that pilots could adapt to some degree to the demands and fatigue of long-duration missions.
|
|
| 9. |
- Sun, Jing, et al.
(författare)
-
A BIM-based approach to design a lifecycle 3D property formation process : A Swedish case study
- 2023
-
Ingår i: Land use policy. - : Elsevier BV. - 0264-8377 .- 1873-5754. ; 131, s. 106712-106712
-
Tidskriftsartikel (refereegranskat)abstract
- 3D property formation has become an important solution to provide a more comprehensive and accurate representation of the property's physical characteristics than traditional 2D property formation. Despite the numerous benefits of the 3D property formation, there is a need for more detailed descriptions of 3D cadastral data delivery between the involved actors to ensure efficient and effective collaboration. In particular, the practical difficulties are when/what related 3D cadastral information and models should be exchanged and stored from/to whom. Therefore, to address these issues, we propose a lifecycle 3D property formation process with four phases by designing an IDM process, which is an international open BIM process standard. In the purpose of forming a Swedish lifecycle 3D property formation process, the IDM process has been applied through organizational, legal and technical aspects, including identifying actors and their roles and values, gathering 3D property formation requirements, defining the data exchange requirements and designing the process map. Moreover, a case study was used to specify the Swedish lifecycle 3D property formation process and information delivery between stakeholders in the IDM. The aim is to facilitate a standardized and unambiguous digital 3D property formation procedure on a national level in order to improve and enhance the digital Swedish Cadastral and Land Administration Systems, but the process is quite generic and could also be applied in other countries.
|
|
| 10. |
- Takala, Esa-Pekka, et al.
(författare)
-
Systematic evaluation of observational methods assessing biomechanical exposures at work
- 2010
-
Ingår i: Scandinavian Journal of Work, Environment and Health. - : Finnish Institute of Occupational Health; National Research Centre for the  . - 0355-3140 .- 1795-990X. ; 36:1
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: This systematic review aimed to identify published observational methods assessing biomechanical exposures in occupational settings and evaluate them with reference to the needs of different users.Methods: We searched scientific databases and the internet for material from 1965 to September 2008. Methods were included if they were primarily based on the systematic observation of work, the observation target was the human body, and the method was clearly described in the literature. A systematic evaluation procedure was developed to assess concurrent and predictive validity, repeatability, and aspects related to utility. At least two evaluators independently carried out this evaluation.Results: We identified 30 eligible observational methods. Of these, 19 had been compared with some other method(s), varying from expert evaluation to data obtained from video recordings or through the use of technical instruments. Generally, the observations showed moderate-to-good agreement with the corresponding assessments made from video recordings; agreement was the best for large-scale body postures and work actions. Postures of wrist and hand as well as trunk rotation seemed to be more difficult to observe correctly. Intra- and inter-observer repeatability were reported for 7 and 17 methods, respectively, and were judged mostly to be moderate or good.Conclusions: With training, observers can reach consistent results on clearly visible body postures and work activities. Many observational tools exist, but none evaluated in this study appeared to be generally superior. When selecting a method, users should define their needs and assess how results will influence decision-making
|
|
