| 1. |
- Aaris-Sorensen, K, et al.
(författare)
-
Late Pleistocene remains of giant deer (Megaloceros giganteus Blumenbach) in Scandinavia: chronology and environment
- 2004
-
Ingår i: Boreas. - : Wiley. - 1502-3885 .- 0300-9483. ; 33:1, s. 61-73
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents new data on the Late Pleistocene giant deer, Megaloceros giganteus (Blumenbach), describing its distribution in time and space, geographical and sexual variation and general biology. Twenty-three south Scandinavian fossils found in situ in lacustrine sediments or redeposited in glaciofluvial material form the basis of this investigation. Fourteen C-14 dates show that the giant deer inhabited southern Scandinavia in the ice-free late Middle Weichselian from c. 40000 to 28000 BP (the Sandnes Interstadial) and again in the Late Weichselian from c. 12000 to 10700 BP (Older Dryas, Allerod and early Younger Dryas Chronozones), corresponding to a calibrated range from c. 14300 to 12400 cal. yr BP. Osteometric analyses show that the Scandinavian giant deer belonged to the upper size range of the lateglacial Irish population and that a marked sexual dimorphism existed, the males being 10-11% larger than the females. Investigations furthermore point at an antler cycle similar to that among extant northern cervids, and subsequently at a rutting season in autumn. The skeletal remains also prove the occurrence of twin delivery and the possibility of reaching an ontogenetic age of at least 23 years. During both occurrences the Scandinavian giant deer population was part of the northernmost distribution of the species in Europe and the palaeogeographical settings and palaeoenvironmental conditions of the two periods show striking similarities. Clearly, the giant deer were able to colonize and survive in a landscape dominated by grasses and sedges with scattered shrubs and dwarf shrubs. They came as close as 200-250 km to the ice front and their distribution included coastal areas along a cold sea with drifting icebergs. They were present in the area at least from March until November. However, the pure arctic conditions created during the early phase of the Younger Dryas event led to a new local extinction around 10700 C-14 yr BP. This was the beginning of a total Eurasian extinction which, at least in Europe, was completed before the Pleistocene/Holocene transition.
|
|
| 2. |
|
|
| 3. |
- Abaravicius, Juozas
(författare)
-
Load Management in Residential Buildings: Considering Techno-Economical and Environmental Aspects
- 2004
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Load problems in electricity markets occur both on the supply and demand side and can have technical, economic and even political causes. Commonly, such problems have been solved by expanding production and/or distribution capacity, importing electricity or by load management. Load management is a techno-economic measure for harmonizing the relations between supply and demand sides, optimizing power generation and transmission and increasing security of supply. Interest in load management differs depending on the perspective of the actors involved: from customer, utility, or producer to state policymaker. The problem of load demand and load management in residential sector is in this thesis approached from different perspectives, i.e. technical, economic, and environmental. The study does not go deep into detailed analyses of each perspective, but rather aims to establish and analyze the links between them. This trans-disciplinary approach is the key methodological moment used in the research work performed by the research group for load management in buildings at the Lund Institute of Technology. The key objective of this study is to analyze load demand variation and load management possibilities in residential sector, particularly detached and semi-detached houses, to experimentally test and analyze the conditions and potential of direct load management from customer and utility viewpoint. Techno-economic and environmental aspects are investigated. The study was performed in collaboration with one electric utility in Southern Sweden. Ten electric-heated houses were equipped with extra meters, enabling hourly load measurements for heating, hot water and total electricity use. Household heating and hot water systems were controlled by the utility using an existing remote reading and monitoring system. The residents noticed some of the control periods, although they didn’t express any larger discomfort. The experiments proved that direct load management might be a possible solution for the utility to solve their peak demand problems. Another solution, considered by the utility and analyzed in this study is a construction of diesel peak power plant. This alternative has negative environmental consequences compared to load management. The analysis of environmental aspects was extended to national level. To include an environmental perspective is a novel approach, since traditionally, load management evaluation is limited the economic and technical viewpoints. It identifies and discusses the possible environmental benefits of load management and evaluates their significance, primary focusing on CO2 emissions reduction. The results show the importance of considering the influence of site-specific or level-specific conditions on the environmental effects of load management. On the national level, load management measures can hardly provide significant environmental benefits, since hydropower is used as the demand following production source in Sweden. Emission reductions will rather be the result of energy efficiency measures, which will cut the load demand as well as the energy demand.
|
|
| 4. |
- Abate, Getahun, et al.
(författare)
-
Direct colorimetric assay for rapid detection of rifampin-resistant Mycobacterium tuberculosis
- 2004
-
Ingår i: Journal of Clinical Microbiology. - 1098-660X. ; 42:2, s. 871-871
-
Tidskriftsartikel (refereegranskat)abstract
- The colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was standardized for direct detection of rifampin-resistant Mycobacterium tuberculosis in sputum samples. The sensitivity and specificity of the direct MTT assay matched those of the standard indirect susceptibility assay on 7H10 medium, and interpretable results were obtained for 98.5% of the samples within 2 weeks. Traditional methods of in vitro drug susceptibility testing are time consuming and laborious. Susceptibility tests on clinical isolates require 6 to 9 weeks, and tests conducted directly on smear-positive samples take about 3 weeks (International Union Against Tuberculosis and Lung Disease, The public health service national tuberculosis reference laboratory and the national laboratory network. Minimum requirements, role and operation in a low-income country, Paris, France, 1998, and P. T. Kent and G. P. Kubica, Public health mycobacteriology. A guide for the level III laboratory, Centers for Disease Control and Prevention, Atlanta, Ga., 1985). More-rapid methods are available but are very expensive for routine use under program conditions in countries with high levels of tuberculosis endemicity.
|
|
| 5. |
- Abdallah, J, et al.
(författare)
-
A precise measurement of the B+, B-0 and mean b-hadron lifetime with the DELPHI detector at LEP I
- 2004
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 33:3, s. 307-324
-
Tidskriftsartikel (refereegranskat)abstract
- Final results from the DELPHI Collaboration on the lifetime of B+ and B-0 mesons and the mean b-hadron lifetime, are presented using the data collected at the Z(0) peak in 1994 and 1995. Elaborate, inclusive, secondary vertexing methods have been employed to ensure a b-hadron reconstruction with good efficiency. To separate samples of B+ and B-0 mesons, high performance neural network techniques are used that achieve very high purity signals. The results obtained are: tau(B+) = 1.624+/-0.014 (stat)+/-0.018 (syst) ps tau(B)0 = 1.531+/-0.021 (stat)+/-0.031 (syst) ps tau(B+)/tau(B)0 = 1.060+/-0.021 (stat)+/-0.024 (syst) and for the average b-hadron lifetime: taub/tau(B)0 = 1.570+/-0.005 (stat)+/-0.008 (syst) ps.
|
|
| 6. |
- Abdallah, J, et al.
(författare)
-
A precise measurement of the tau lifetime
- 2004
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 36:3, s. 283-296
-
Tidskriftsartikel (refereegranskat)abstract
- The tau lepton lifetime has been measured with the e(+) e(-) --> tau(+) tau(-) events collected by the DELPHI detector at LEP in the years 1991 - 1995. Three different methods have been exploited, using both one-prong and three-prong tau decay channels. Two measurements have been made using events in which both taus decay to a single charged particle. Combining these measurements gave tau(tau) ( 1 prong) = 291.8 +/- 2.3(stat) +/- 1.5(sys) fs. A third measurement using taus which decayed to three charged particles yielded tau(tau) (3 prong) = 288.6 +/- 2.4(stat) +/- 1.3(sys) fs. These were combined with previous DELPHI results to measure the tau lifetime, using the full LEP1 data sample, to be tau(tau) = 290.9 +/- 1.4(stat) +/- 1.0(sys) fs.
|
|
| 7. |
- Abdallah, J, et al.
(författare)
-
Determination of the e(+)e(-)->gamma gamma(gamma) cross-section at LEP 2
- 2004
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 37:4, s. 405-419
-
Tidskriftsartikel (refereegranskat)abstract
- A test of the benchmark QED process e(+) e(-) -->gammagamma(gamma) is reported, using the data collected with the DELPHI detector at LEP 2. The data analysed were recorded at centre-of-mass energies ranging from 161 GeV to 208 GeV and correspond to a total integrated luminosity of 656.4 pb(-1). The Born cross-section for the process e(+) e(-)-->gammagamma(gamma) was determined, confirming the validity of QED at the highest energies ever attained in electron-positron collisions. Lower limits on the parameters of a number of possible deviations from QED, predicted within theoretical frameworks expressing physics beyond the Standard Model, were derived.
|
|
| 8. |
- Abdallah, J, et al.
(författare)
-
Final results from DELPHI on the searches for SM and MSSM neutral Higgs bosons
- 2004
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 32:2, s. 145-183
-
Tidskriftsartikel (refereegranskat)abstract
- These final results from DELPHI searches for the Standard Model (SM) Higgs boson, together with benchmark scans of the Minimal Supersymmetric Standard Model (MSSM) neutral Higgs bosons, used data taken at centre-of-mass energies between 200 and 209 GeV with a total integrated luminosity of 224 pb(-1). The data from 192 to 202 GeV are reanalysed with improved b-tagging for MSSM final states decaying to four b-quarks. The 95% confidence level lower mass bound on the Standard Model Higgs boson is 114.1 GeV/c(2). Limits are also given on the lightest scalar and pseudo-scalar Higgs bosons of the MSSM.
|
|
| 9. |
- Abdallah, J, et al.
(författare)
-
Measurement of the forward-backward asymmetries of e(+)e(-)-> Z -> b(b)over-bar and e(+)e(-)-> Z -> c(c)over-bar using prompt leptons
- 2004
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 34:2, s. 109-125
-
Tidskriftsartikel (refereegranskat)abstract
- The forward-backward asymmetries of the processes e(+) e(-) --> Z --> b (b) over bar and e(+)e(-) --> Z --> c (c) over bar were measured from a sample of hadronic Z decays collected by the DELPHI experiment between 1993 and 1995. Enriched samples of b (b) over bar and c (c) over bar events were obtained using lifetime information. The tagging of b and c quarks in these samples was based on the semileptonic decay channels b/c --> X + mu and b/c --> X + e combined with charge flow information from the hemisphere opposite to the lepton. Combining the A(FB)(b (b) over bar) and A(FB)(c (c) over bar) measurements presented in this paper with published results based on 1991 and 1992 DELPHI data samples, the following pole asymmetries were obtained: A(FB)(0,b) = 0.1021 +/- 0.0052 (stat) +/- 0.0024 (syst) A(FB)(0,c) = 0.0728 +/- 0.0086 (stat) +/- 0.0063 (syst) The effective value of the weak mixing angle derived from these measurements is sin(2) theta(W,eff)(lept) = 0.23170 +/- 0.00097.
|
|
| 10. |
- Abdallah, J, et al.
(författare)
-
Measurement of the Lambda(0)(b) decay form factor
- 2004
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 585:1-2, s. 63-84
-
Tidskriftsartikel (refereegranskat)abstract
- The form factor of A(o)(b) baryons is estimated using 3.46 x 10(6) hadronic Z decays collected by the DELPM experiment between 1992 and 1995. Charmed A(c)(+) baryons fully reconstructed in the pK(-)pi(+), pK(o)(s), and Api(+)pi(+)pi(-) modes, are associated to a c S lepton with opposite charge in order to select A(o)(b) --> A(c)(+)l(-)v(l) decays. From a combined likelihood and event rate fit to the b C distribution of the Isgur-Wise variable w, and using the Heavy Quark Effective Theory (HQET), the slope of the b-baryon form factor is measured to be p(2)=2.03+/-0.46(stat)(-1.00)(+0.72)(syst). The exclusive semileptonic branching fraction Br(A(b)(o) --> A(c)(+)l(-)v(l)) can be derived from p(2) and is found to be (5.0(-0.8)(+1.1)(stat)(-1.2)(+1.6) (syst))%. Limits on other branching fractions are also obtained. (C) 2004 Published by Elsevier B.V.
|
|
