| 1. |
- Xu, Cheng, et al.
(författare)
-
Scalable Validation of Industrial Equipment using a Functional DSMS
- 2017
-
Ingår i: Journal of Intelligent Information Systems. - : Springer. - 0925-9902 .- 1573-7675. ; 48:3, s. 553-577
-
Tidskriftsartikel (refereegranskat)abstract
- A stream validation system called SVALI is developed in order to continuouslyvalidate data streams from industrial equipment. The functional data model of SVALI allows the user to dene meta-data and queries about the equipment in terms of types and functions. The two system functions model-andvalidate and learn-and-validate provide such validation functionality. The experiments show that parallel stream processing enables SVALI to scale very well with respect to response time and system throughput. The paper is based on a real world application for wheel loader slippage detection at Volvo Construction Equipment.
|
|
| 2. |
- Karlsson, Stefan, 1984-, et al.
(författare)
-
Effects of deposition temperature on the mechanical and structural properties of amorphous Al-Si-O thin films prepared by radio frequency magnetron sputtering
- 2023
-
Ingår i: Thin Solid Films. - : Elsevier. - 0040-6090 .- 1879-2731. ; 787
-
Tidskriftsartikel (refereegranskat)abstract
- Aluminosilicate (Al–Si–O) thin films containing up to 31 at.% Al and 23 at.% Si were prepared by reactive RF magnetron co-sputtering. Mechanical and structural properties were measured by indentation and specular reflectance infrared spectroscopy at varying Si sputtering target power and substrate temperature in the range 100 to 500 °C. It was found that an increased substrate temperature and Al/Si ratio give denser structure and consequently higher hardness (7.4 to 9.5 GPa) and higher reduced elastic modulus (85 to 93 GPa) while at the same time lower crack resistance (2.6 to 0.9 N). The intensity of the infrared Si-O-Si/Al asymmetric stretching vibrations shows a linear dependence with respect to Al concentration. The Al–O–Al vibrational band (at 1050 cm−1) shifts towards higher wavenumbers with increasing Al concentration which indicates a decrease of the bond length, evidencing denser structure and higher residual stress, which is supported by the increased hardness. The same Al–O–Al vibrational band (at 1050 cm−1) shifts towards lower wavenumber with increasing substrate temperature indicating an increase in the average coordination number of Al.
|
|
| 3. |
- Fontana, Enrico, et al.
(författare)
-
Nominated procurement and the indirect control of nominated sub-suppliers: Evidence from the Sri Lankan apparel supply chain
- 2021
-
Ingår i: Journal of Business Research. - : Elsevier BV. - 0148-2963 .- 1873-7978. ; 127, s. 179-192
-
Tidskriftsartikel (refereegranskat)abstract
- This article describes and discusses nominated procurement as a means through which buyers select sub-suppliers to achieve sustainability compliance upstream in emerging economies' supply chains. Hence, it critically examines the ways buyers articulate nominated procurement and the unfolding supply chain consequences. Based on in-depth interviews and fieldwork in the Sri Lankan apparel supply chain, the findings indicate that buyers accomplish sustainability compliance among their sub-suppliers while prioritizing their own business agenda. In doing so, however, buyers perpetuate “suboptimal compliance” of raw material suppliers and “sandwiching” of direct suppliers as harmful consequences on the supply chain. These consequences link theoretically with commercial, geographical, compliance and extended-compliance pressure. This article contributes to the advancement of the Sustainable Supply Chain Management literature by theorizing about nominated procurement, direct and indirect pressure, and pointing to the supply chain consequences beyond achievements in sustainability compliance.
|
|
| 4. |
- Khodadad, Davood, et al.
(författare)
-
Single-shot dual-polarization holography : measurement of the polarization state of a magnetic sample
- 2015
-
Ingår i: SPECKLE 2015. - : SPIE - International Society for Optical Engineering. - 9781628418781
-
Konferensbidrag (refereegranskat)abstract
- In this paper a single-shot digital holographic set-up with two orthogonally polarized reference beams is proposed to achieve rapid acquisition of Magneto-Optical Kerr Effect images. Principles of the method and the background theory for dynamic state of polarization measurement by use of digital holography are presented. This system has no mechanically moving elements or active elements for polarization control and modulation. An object beam is combined with two reference beams at different off-axis angles and is guided to a detector. Then two complex fields (interference terms) representing two orthogonal polarizations are recorded in a single frame simultaneously. Thereafter the complex fields are numerically reconstructed and carrier frequency calibration is done to remove aberrations introduced in multiplexed digital holographic recordings. From the numerical values of amplitude and phase, a real time quantitative analysis of the polarization state is possible by use of Jones vectors. The technique is demonstrated on a magnetic sample that is a lithographically patterned magnetic microstructure consisting of thin permalloy parallel stripes.
|
|
| 5. |
- Pashkevich, Natallia, 1983-, et al.
(författare)
-
Sustainability through the Digitalization of Industrial Machines : Complementary Factors of Fuel Consumption and Productivity for Forklifts with Sensors
- 2019
-
Ingår i: Sustainability. - Basel, Switzerland : MDPI. - 2071-1050. ; 11:23, s. 1-21
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing the fuel efficiency of industrial machines through digitalization can enable the transport and logistics sector to overcome challenges such as low productivity growth and increasing CO2 emissions. Modern digitalized machines with embedded sensors that collect and transmit operational data have opened up new avenues for the identification of more efficient machine use. While existing studies of industrial machines have mostly focused on one or a few conditioning factors at a time, this study took a complementary approach, using a large set of known factors that simultaneously conditioned both the fuel consumption and productivity of medium-range forklifts (n = 285) that operated in a natural industrial setting for one full year. The results confirm the importance of a set of factors, including aspects related to the vehicles’ travels, drivers, operations, workload spectra, and contextual factors, such as industry and country. As a novel contribution, this study shows that the key conditioning factors interact with each other in a non-linear and non-additive manner. This means that addressing one factor at a time might not provide optimal fuel consumption, and instead all factors need to be addressed simultaneously as a system.
|
|
| 6. |
- Wagner, Leopold, et al.
(författare)
-
The influence of chemical degradation and polyethylene glycol on moisture-dependent cell wall properties of archeological wooden objects : a case study of the Vasa shipwreck
- 2016
-
Ingår i: Wood Science and Technology. - : Springer Science and Business Media LLC. - 0043-7719 .- 1432-5225. ; 50:6, s. 1103-1123
-
Tidskriftsartikel (refereegranskat)abstract
- Cell wall measures allow for direct assessment of wood modification without the adverse effect of varying density and microstructure. In this study, cell wall properties of recent and archeological oak wood from the Vasa shipwreck were investigated for cell wall stiffness, hardness and creep with respect to effects of chemical degradation, impregnation with a preservation agent, namely polyethylene glycol, and moisture. For this purpose, nanoindentation tests were performed at varying relative humidity, leading to different moisture contents in the wood samples. Concurrently, microstructural and chemical characterization of the mate- rial was conducted. Impregnated and untreated recent oak wood showed a softening effect of both moisture and preservation agent at the wood cell wall level. On the contrary, increased stiffness was found for non-impregnated Vasa oak, which can be explained by aging-related modifications in cell wall components. These effects were counteracted by the softening effect of polyethylene glycol in the impregnated Vasa material, where a lower overall stiffness was measured. The reverse effect of the preservation agent and moisture, namely increased indentation creep of the cell wall material, was revealed. The loss of acetyl groups in the hemicelluloses explained the decreased hygroscopicity of the Vasa oak. In the impregnated Vasa oak, this effect seemed to be partly counteracted by the presence of low-molecular polyethylene glycol contributing to higher hygroscopicity of the cell wall. Thus, the higher overall sorptive capacity of the impregnated Vasa material, with respect to the non-impregnated material, was detected, which has resulted in a sorptive behavior similar to that of recent oak wood. The proposed approach requires only small amounts of material, making it especially suitable for application to precious historical wooden artifacts.
|
|
| 7. |
- Johansson, Wilhelm, et al.
(författare)
-
Transparent TiO2 and ZnO Thin Films on Glass for UV Protection of PV Modules
- 2019
-
Ingår i: Frontiers in Materials. - Lausanne, Switzerland : Frontiers Media S.A.. - 2296-8016. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Failure of PV modules frequently occurs as a result of degradation of their encapsulation material by destructive UV radiation. Both the life expectancy and efficiency of PV modules can be improved by reducing the transmittance of the destructive UV radiation through the cover glass without compromising the transmittance in the visible wavelength region. In addition, if the absorbed UV photons can be down-shifted to wavelengths that can be more efficiently converted to electrical energy, an additional increase of the PV efficiency could be achieved. In this study we have investigated transparent ZnO and TiO2 thin films deposited by spray pyrolysis on soda lime silicate float glass as functional layers on PV cover glass. The optical bandgap, UV-cutoff, UV-Vis transmittance, reflectivity (total and diffuse) and photoluminescence have been determined. The ZnO coating shifted the optical bandgap to longer wavelengths, resulting in a reduction of the transmittance of destructive UV radiation by up to ∼85%. Distinct photoluminescence peaks at 377 nm and at 640 nm were observed for one of the ZnO samples. The TiO2 coated glasses also showed an increased UV cutoff, which resulted in a reduction of transmittance of destructive UV radiation by up to 75%. However, no photoluminescence peaks could be observed from the TiO2 films with 325 nm excitation laser, which can be explained by the fact that only indirect interband transitions are accessible at this excitation wavelength. Deposition of both ZnO and TiO2 coatings resulted in a reduction of the transmitted light convertible by PV modules, by up to 12.3 and 21.8%, respectively. The implication of the results is discussed in terms of lifetime expectancy and efficiency of PV modules.
|
|
| 8. |
- Autio, Hanna, et al.
(författare)
-
Historically Based Room Acoustic Analysis and Auralization ofa Church in the 1470s
- 2021
-
Ingår i: Applied Sciences. - : MDPI. - 1454-5101 .- 2076-3417. ; 11:4
-
Tidskriftsartikel (refereegranskat)abstract
- Worship space acoustics have been established as an important part of a nation’s cultural heritage and area of acoustic research, but more research is needed regarding the region of northern Europe. This paper describes the historical acoustics of an important abbey church in Sweden in the 1470s. A digital historical reconstruction is developed. Liturgical material specific to this location is recorded and auralized within the digital reconstruction, and a room acoustic analysis is performed. The analysis is guided by liturgical practices in the church and the monastic order connected to it. It is found that the historical sound field in the church is characterized by the existence of two distinct acoustical subspaces within it, each corresponding to a location dedicated to the daily services of the monastical congregations. The subspaces show significantly better acoustic conditions for liturgical activities compared to the nave, which is very reverberant under the conditions of daily services. Acoustic transmission from the two subspaces is limited, indicating that the monastic congregations were visually and acoustically separated from the visitors in the nave and each other.
|
|
| 9. |
-
Mixed numerical-experimental methods in woodmicromechanics
- 2012
-
Ingår i: COST Action FP 0802. - Edinburgh, Scotland : Proceedings of the Annual Workshop of COST Action FP0802: Micro-characterisation of wood materials and properties. ; , s. 86-87
-
Proceedings (redaktörskap) (refereegranskat)
|
|
| 10. |
- Svensson, Fredric G., et al.
(författare)
-
Hemocompatibility of Nanotitania-Nanocellulose Hybrid Materials
- 2021
-
Ingår i: Nanomaterials. - : MDPI. - 2079-4991. ; 11:5
-
Tidskriftsartikel (refereegranskat)abstract
- In order to develop a new type of improved wound dressing, we combined the wound healing properties of nanotitania with the advantageous dressing properties of nanocellulose to create three different hybrid materials. The hemocompatibility of the synthesized hybrid materials was evaluated in an in vitro human whole blood model. To our knowledge, this is the first study of the molecular interaction between hybrid nanotitania and blood proteins. Two of the hybrid materials prepared with 3 nm colloidal titania and 10 nm hydrothermally synthesized titania induced strong coagulation and platelet activation but negligible complement activation. Hence, they have great potential as a new dressing for promoting wound healing. Unlike the other two, the third hybrid material using molecular ammonium oxo-lactato titanate as a titania source inhibited platelet consumption, TAT generation, and complement activation, apparently via lowered pH at the surface interface. It is therefore suitable for applications where a passivating surface is desired, such as drug delivery systems and extracorporeal circuits. This opens the possibility for a tailored blood response through the surface functionalization of titania.
|
|
