| 1. |
- Metreveli, Giorgi, et al.
(författare)
-
A Size-Exclusion Nanocellulose Filter Paper for Virus Removal
- 2014
-
Ingår i: Advanced Healthcare Materials. - : Wiley. - 2192-2640 .- 2192-2659. ; 10:3, s. 1546-1550
-
Tidskriftsartikel (refereegranskat)abstract
- This is the first time a 100% natural, unmodified nanofibrous polymer-based membrane is demonstrated capable of removing viruses solely based on the size-exclusion principle, with log10 reduction value (LRV) ≥ 6.3 as limited by the assay lower detection limit and the feed virus titre, thereby matching the performance of industrial synthetic polymer virus removal filters.
|
|
| 2. |
- Carlsson, Daniel O
(författare)
-
Structural and Electrochemical Properties of Functionalized Nanocellulose Materials and Their Biocompatibility
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Nanocellulose has received considerable interest during the last decade because it is renewable and biodegradable, and has excellent mechanical properties, nanoscale dimensions and wide functionalization possibilities. It is considered to be a unique and versatile platform on which new functional materials can be based.This thesis focuses on nanocellulose from wood (NFC) and from Cladophora algae (CNC), functionalized with surface charges or coated with the conducting polymer polypyrrole (PPy), aiming to study the influence of synthesis processes on structural and electrochemical properties of such materials and assess their biocompatibility.The most important results of the work demonstrated that 1) CNC was oxidized to the same extent using electrochemical TEMPO-mediated oxidation as with conventional TEMPO processes, which may facilitate easier reuse of the reaction medium; 2) NFC and CNC films with or without surface charges were non-cytotoxic as assessed by indirect in vitro testing. Anionic TEMPO-CNC films promoted fibroblast adhesion and proliferation in direct in vitro cytocompatibility testing, possibly due to its aligned fibril structure; 3) Rinsing of PPy-coated nanocellulose fibrils, which after drying into free-standing porous composites are applicable for energy storage and electrochemically controlled ion extraction, significantly degraded the PPy coating, unless acidic rinsing was employed. Only minor degradation was observed during long-term ambient storage; 4) Variations in the drying method as well as type and amount of nanocellulose offered ways of tailoring the porosities of nanocellulose/PPy composites between 30% and 98%, with increments of ~10%. Supercritical CO2-drying generated composites with the largest specific surface area yet reported for nanocellulose/conducting polymer composites (246 m2/g). The electrochemical oxidation rate was found to be controlled by the composite porosity; 5) In blood compatibility assessments for potential hemodialysis applications, heparinization of CNC/PPy composites was required to obtain thrombogenic properties comparable to commercial hemodialysis membranes. The pro-inflammatory characteristics of non-heparinized and heparinized composites were, to some extent, superior to commercial membranes. The heparin coating did not affect the solute extraction capacity of the composite.The presented results are deemed to be useful for tuning the properties of systems based on the studied materials in e.g. energy storage, ion exchange and biomaterial applications.
|
|
| 3. |
- Lindh, Jonas, et al.
(författare)
-
Preparation of Porous Cellulose Beads via Introduction of Diamine Spacers
- 2016
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 32:22, s. 5600-5607
-
Tidskriftsartikel (refereegranskat)abstract
- The current work presents a synthesis route based on the reductive amination of 2,3-dialdehyde cellulose beads with diamines to render micrometer-sized beads with increased specific surface area (SSA) and porosity in the mesoporous range. Specifically, the influence of the reductive amination of 2,3-dialdehyde cellulose (DAC) using aliphatic and aromatic tethered mono- and diamines on bead microstructure was investigated. Aliphatic and aromatic tethered monoamines were found to have limited utility for producing porous beads whereas the introduction of diamines provided beads with a porous texture and an SSA increasing from <1 to >30 m(2)/g. Both aliphatic and aromatic diamines were found to be useful in producing porous beads having a pore size distribution range of 10 to 100 nm, as verified by N-2 gas adsorption and mercury intrusion porosimetry analyses. The true density of the functionalized DAC beads decreased to an average of about 1.36 g/cm(3) as compared to 1.48 g/cm(3) for the unfunctionalized, fully oxidized DAC beads. The total porosity of the beads was, according to mercury porosimetry, in the range of 54-64%. Reductive amination with 1,7-diaminoheptane provided beads that were stable under alkaline conditions (I M NaOH). It was concluded that the introduction of tethered diamines into DAC beads is a facile method for producing mesoporous beads.
|
|
| 4. |
- Ferraz, Natalia, et al.
(författare)
-
In vitro and in vivo toxicity of rinsed and aged nanocellulose-polypyrrole composites
- 2012
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 100A:8, s. 2128-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Novel composites of nanocellulose and the conducting polymer polypyrrole (PPy) are herein suggested as potential candidates for active ion-extraction membranes in electrochemically controlled hemodialysis. This work has defined processing parameters to obtain a biocompatible nanocellulose-PPy composite and for the first time, the effect of the composite ageing on cell viability has been studied.The influence of rinsing and extraction process steps, as well as ageing under different conditions (i.e. in air, at –20 ˚C and in argon), on the electroactivity and cytotoxicity of a PPy-nanocellulose composite has been investigated. The biocompatibility evaluation was based on indirect toxicity assays with fibroblasts and monocyte cell lines and an acute toxicity test in mice, while the electroactivity was evaluated by cyclic voltammetry experiments.The as-prepared composite did not induce any cytotoxic response in vitro or in vivo. Extensive rinsing and 48 hour incubation in biological buffer previous to the preparation of the culture medium extracts were, however, necessary to obtain a non-cytotoxic composite. The as-prepared composite was also found to exhibit acceptable electrochemical performance, which was retained upon 4 weeks storage in argon atmosphere. It was shown that ageing of the composite had a negative effect on biocompatibility, regardless of the storage condition. Thus, to allow for long time storage of electroactive nanocellulose-PPy hemodialysis membranes, the degradation of PPy upon storage must be controlled. The present results show that the biocompatibility of PPy composites depends on the rinsing and pre-treatment of the composite material as well as the aging of the material.
|
|
| 5. |
|
|
| 6. |
- Mihranyan, Albert, et al.
(författare)
-
Influence of the nanocellulose raw material characteristics on the electrochemical and mechanical properties of conductive paper electrodes
- 2012
-
Ingår i: Journal of Materials Science. - : Springer Science and Business Media LLC. - 0022-2461 .- 1573-4803. ; 47:10, s. 4463-4472
-
Tidskriftsartikel (refereegranskat)abstract
- Paper-based conductive electrode materials of polypyrrole (PPy) and nanocellulose (NC) have received much attention lately for applications in non-metal-based energy storage devices, ion exchange, etc. The aim of this study was to study how the primary characteristics of NC raw materials impact and electrochemical properties of conductive NC-PPy composite sheets. Three NC raw materials were used: Cladophora cellulose (NCUU) produced at Uppsala University, Cladophora cellulose (NCFMC) produced at FMC Biopolymer, and microfibrillated cellulose (NCINN) produced at Innventia AB. Composite paper sheets of PPy coated on the substrate NC material were produced. The NC raw materials and the composites were characterized with a battery of techniques to derive their degree of crystallinity, degree of polymerization, specific surface area, pore size distribution, porosity, electron conductivity, charge capacity and tensile properties. It was found that the pore size distribution and overall porosity increase upon coating of NC fibres for all the samples. The charge capacity of the composites was found to decrease with the porosity of the samples. It was further found that the mechanical strength of the pristine NC sheets was largely dependent on the overall porosity, with NCINN having the highest mechanical strength and lowest porosity in the series. The mechanical properties of the composite NC-PPy sheets were significantly diminished as compared with pristine NC sheets because of the impaired H-bonding between fibres and PPy-coated nanofibres. It was concluded that to improve the mechanical properties of PPy-NC sheets, a fraction of additive bare NC fibres is beneficial. Future study may include the effect of both soluble and insoluble additives to improve the mechanical strength of PPy-NC sheets.
|
|
| 7. |
- Tummala, Gopi Krishna, 1986-, et al.
(författare)
-
Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications
- 2016
-
Ingår i: ACS Biomaterials Science & Engineering. - : American Chemical Society (ACS). - 2373-9878. ; 2:11, s. 2072-2079
-
Tidskriftsartikel (refereegranskat)abstract
- A nanocellulose-reinforced poly(vinyl alcohol) hydrogel material of exceptionally high water content for ophthalmic applications is presented (>90 wt %), which also features a hitherto unprecedented combination of optical, mechanical, viscoelastic, oxygen permeability, and biocompatibility properties. The hydrogel combines the desired softness with remarkable strain-dependent mechanical strength and thereby demonstrates hyperelastic, rubber-like mechanical properties. The observed unusual mechanical behavior is due to both high water content and the combination of relatively stiff cellulose nanowhiskers entangled in a soft polymer matrix of poly(vinyl alcohol) (PVA), thus mimicking the structural characteristics of the cornea's main constituents, i.e., water and collagen.
|
|
| 8. |
- Wu, Lulu
(författare)
-
Virus retentive filter paper for processing of plasma-derived proteins
- 2020
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The studies in the present thesis explored the feasibility of using nanocellulose-based filters in virus removal filtration of plasma-derived proteins. In Paper I, two-step nanofiltration of commercially available human serum albumin (HSA) product, which was diluted to 10 g L-1 by phosphate buffer saline (PBS) and adjusted pH to 7.4, was performed to remove soluble protein aggregates and reduce filter fouling. The two-step filtration of HSA employed nanocellulose-based filters of varying thickness, i.e. 11 μm and 22 μm filters. The removal of HSA aggregates during filtration through 11 μm pre-filters dramatically improves the flow properties of the 22 μm filter, enabling high protein throughput and high virus clearance. A distribution of pore sizes between 50 nm and 80 nm, which is present in the 11 μm filter and is absent in the 22 μm filter, plays a crucial part in removing the HSA aggregates. With respect to virus filtration, 1 bar constant trans-membrane pressure filtration shows poor removal ability of ΦX174 bacteriophage (28 nm), i.e., log10 reduction value (LRV) ≤ 3.75, while that at 3 bar and 5 bar achieves LRV[MOU1] [LW2] > 5 model virus clearance and overall rapid filtration. Removal of protein aggregates during bioprocessing of HSA products is key to improving the filtration flux, which makes it possible to apply virus removal filtration for HSA to ensure its virus safety. In Paper II, nanofiltration of human plasma-derived intravenous immuno-globulin (IVIG) intermediate (11.26 g L-1, pH 4.9) was carried out to demonstrate high product recovery and high model virus clearance. Virus removal filtration of industrial-grade human IVIG was achieved using 33μm filters at both low (60 Lm-2) and high (288 Lm-2) volumetric load. No changes in IVIG structure were detected and high product recovery was recorded. High virus clearance (LRV ≥ 5-6) was achieved for the small-size model viruses (ΦX174 and MS2 bacteriophages) during the load volume of 60 Lm-2. Side-by-side comparisons with commercial virus removal filters suggest that the nanocellulose-based filter paper presents great potential for industrial bioprocessing of plasma-derived IVIG. In Paper III, process analytical technology (PAT) approach was employed to identify the critical filter parameters, e.g. thickness, basis weight, pore size, and flux, affecting model virus removal efficiency using filters produced by different hot presses. The quality parameters were analyzed with ANOVA and Shewhart charts. Compared with other studied parameters, the hydraulic flux appears as the most relevant final product quality attribute of the nanocellulose-based filter paper to reflect the virus removal efficiency. In particular, a 15% higher flux may be associated with a 0.5-1.0 log10 reduced virus clearance (p=0.007). The results are highlight the importance of continued systematic studies in quality assurance using statistical process control tools [MOU1]Define LRV [LW2]Defined in the line above
|
|
| 9. |
- Asper, M., et al.
(författare)
-
Removal of xenotropic murine leukemia virus by nanocellulose based filter paper
- 2015
-
Ingår i: Biologicals (Print). - : Elsevier BV. - 1045-1056 .- 1095-8320. ; 43:6, s. 452-456
-
Tidskriftsartikel (refereegranskat)abstract
- The removal of xenotrpic murine leukemia virus (xMuLV) by size-exclusion filter paper composed of 100% naturally derived cellulose was validated. The filter paper was produced using cellulose nanofibers derived from Cladophora sp. algae. The filter paper was characterized using atomic force microscopy, scanning electron microscopy, helium pycnometry, and model tracer (100 nm latex beads and 50 nm gold nanoparticles) retention tests. Following the filtration of xMuLV spiked solutions, LRV >= 5.25 log(10) TCID50 was observed, as limited by the virus titre in the feed solution and sensitivity of the tissue infectivity test. The results of the validation study suggest that the nanocellulose filter paper is useful for removal of endogenous rodent retroviruses and retrovirus-like particles during the production of recombinant proteins.
|
|
| 10. |
|
|
