| 1. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Volume-amplified magnetic bioassay integrated with microfluidic sample handling and high-Tc SQUID magnetic readout
- 2018
-
Ingår i: APL Bioengineering. - : AIP Publishing. - 2473-2877. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- A bioassay based on a high-Tc superconducting quantum interference device (SQUID) reading out functionalized magnetic nanoparticles (fMNPs) in a prototype microfluidic platform is presented. The target molecule recognition is based on volume amplification using padlock-probe-ligation followed by rolling circle amplification (RCA). The MNPs are functionalized with single-stranded oligonucleotides, which give a specific binding of the MNPs to the large RCA coil product, resulting in a large change in the amplitude of the imaginary part of the ac magnetic susceptibility. The RCA products from amplification of synthetic Vibrio cholera target DNA were investigated using our SQUID ac susceptibility system in microfluidic channel with an equivalent sample volume of 3 μl. From extrapolation of the linear dependence of the SQUID signal versus concentration of the RCA coils, it is found that the projected limit of detection for our system is about 1.0 e5 RCA coils (0.2e−18 mol), which is equivalent to 66 fM in the 3 μl sample volume. This ultra-high magnetic sensitivity and integration with microfluidic sample handling are critical steps towards magnetic bioassays for rapid detection of DNA and RNA targets at the point of care.
|
|
| 2. |
|
|
| 3. |
- Ning, Zhijun, et al.
(författare)
-
Role of surface ligands in optical properties of colloidal CdSe/CdS quantum dots.
- 2011
-
Ingår i: Physical chemistry chemical physics : PCCP. - : Royal Society of Chemistry (RSC). - 1463-9084 .- 1463-9076. ; 13:13, s. 5848-54
-
Tidskriftsartikel (refereegranskat)abstract
- In order to study the role of surface ligands in determining optical properties of colloidal quantum dots (QDs), we have selectively fabricated and studied CdSe/CdS core-shell QDs with strongly confined electron and hole states attached with commonly used surface ligands. Optical properties, viz. absorption and fluorescence of these QDs, are characterized from which salient changes have been observed for different ligand substitutions which, through theoretical analysis, can be associated with electronic structure properties of the QD-ligand composite systems, in particular localization of wave functions of electrons and holes in the QDs and the band matching of the HOMO-LUMO gap of the ligands. The findings can be utilized to facilitate the understanding and optimization of properties of QD biomarkers with functionalizing surface ligands for targeting cellular objects.
|
|
| 4. |
- Ballerini, Lucia, et al.
(författare)
-
Comparison of histomorphometrical data obtained with two different image analysis methods
- 2007
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer. - 0957-4530 .- 1573-4838. ; 18:8, s. 1471-1479
-
Tidskriftsartikel (refereegranskat)abstract
- A common way to determine tissue acceptance of biomaterials is to perform histomorphometrical analysis on histologically stained sections from retrieved samples with surrounding tissue, using various methods. The “time and money consuming” methods and techniques used are often “in house standards”. We address light microscopic investigations of bone tissue reactions on un-decalcified cut and ground sections of threaded implants. In order to screen sections and generate results faster, the aim of this pilot project was to compare results generated with the in-house standard visual image analysis tool (i.e., quantifications and judgements done by the naked eye) with a custom made automatic image analysis program. The histomorphometrical bone area measurements revealed no significant differences between the methods but the results of the bony contacts varied significantly. The raw results were in relative agreement, i.e., the values from the two methods were proportional to each other: low bony contact values in the visual method corresponded to low values with the automatic method. With similar resolution images and further improvements of the automatic method this difference should become insignificant. A great advantage using the new automatic image analysis method is that it is time saving—analysis time can be significantly reduced.
|
|
| 5. |
- Redjai Sani, Sohrab, et al.
(författare)
-
Mutually synchronized bottom-up multi-nanocontact spin-torque oscillators
- 2013
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 4, s. 2731-
-
Tidskriftsartikel (refereegranskat)abstract
- Spin-torque oscillators offer a unique combination of nanosize, ultrafast modulation rates and ultrawide band signal generation from 100 MHz to close to 100 GHz. However, their low output power and large phase noise still limit their applicability to fundamental studies of spin-transfer torque and magnetodynamic phenomena. A possible solution to both problems is the spin-wave-mediated mutual synchronization of multiple spin-torque oscillators through a shared excited ferromagnetic layer. To date, synchronization of high-frequency spin-torque oscillators has only been achieved for two nanocontacts. As fabrication using expensive top-down lithography processes is not readily available to many groups, attempts to synchronize a large number of nanocontacts have been all but abandoned. Here we present an alternative, simple and cost-effective bottom-up method to realize large ensembles of synchronized nanocontact spin-torque oscillators. We demonstrate mutual synchronization of three high-frequency nanocontact spin-torque oscillators and pairwise synchronization in devices with four and five nanocontacts.
|
|
| 6. |
- Lindahl, Carl, et al.
(författare)
-
Biomimetic calcium phosphate coating of additively manufactured porous CoCr implants
- 2015
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 353, s. 40-47
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this work was to study the feasibility to use a biomimetic method to prepare biomimetic hydroxyapatite (HA) coatings on CoCr substrates with short soaking times and to characterize the properties of such coatings. A second objective was to investigate if the coatings could be applied to porous CoCr implants manufactured by electron beam melting (EBM). The coating was prepared by immersing the pretreated CoCr substrates and EBM implants into the phosphate-buffered solution with Ca2+ in sealed plastic bottles, kept at 60 degrees C for 3 days. The formed coating was partially crystalline, slightly calcium deficient and composed of plate-like crystallites forming roundish flowers in the size range of 300-500 nm. Cross-section imaging showed a thickness of 300-500 nm. In addition, dissolution tests in Tris-HCl up to 28 days showed that a substantial amount of the coating had dissolved, however, undergoing only minor morphological changes. A uniform coating was formed within the porous network of the additive manufactured implants having similar thickness and morphology as for the flat samples. In conclusion, the present coating procedure allows coatings to be formed on CoCr and could be used for complex shaped, porous implants made by additive manufacturing.
|
|
| 7. |
- Pujari-Palmer, Michael, et al.
(författare)
-
A Novel Class of Injectable Bioceramics That Glue Tissues and Biomaterials
- 2018
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 11:12
-
Tidskriftsartikel (refereegranskat)abstract
- Calcium phosphate cements (CPCs) are clinically effective void fillers that are capable of bridging calcified tissue defects and facilitating regeneration. However, CPCs are completely synthetic/inorganic, unlike the calcium phosphate that is found in calcified tissues, and they lack an architectural organization, controlled assembly mechanisms, and have moderate biomechanical strength, which limits their clinical effectiveness. Herein, we describe a new class of bioinspired CPCs that can glue tissues together and bond tissues to metallic and polymeric biomaterials. Surprisingly, alpha tricalcium phosphate cements that are modified with simple phosphorylated amino acid monomers of phosphoserine (PM-CPCs) bond tissues up to 40-fold stronger (2.5-4 MPa) than commercial cyanoacrylates (0.1 MPa), and 100-fold stronger than surgical fibrin glue (0.04 MPa), when cured in wet-field conditions. In addition to adhesion, phosphoserine creates other novel properties in bioceramics, including a nanoscale organic/inorganic composite microstructure, and templating of nanoscale amorphous calcium phosphate nucleation. PM-CPCs are made of the biocompatible precursors calcium, phosphate, and amino acid, and these represent the first amorphous nano-ceramic composites that are stable in liquids.
|
|
| 8. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Homogeneous Differential Magnetic Assay
- 2019
-
Ingår i: Acs Sensors. - : American Chemical Society (ACS). - 2379-3694. ; 4:9, s. 2381-2388
-
Tidskriftsartikel (refereegranskat)abstract
- Assays are widely used for detection of various targets, including pathogens, drugs, and toxins. Homogeneous assays are promising for the realization of point-of-care diagnostics as they do not require separation, immobilization, or washing steps. For low concentrations of target molecules, the speed and sensitivity of homogeneous assays have hitherto been limited by slow binding kinetics, time-consuming amplification steps, and the presence of a high background signal. Here, we present a homogeneous differential magnetic assay that utilizes a differential magnetic readout that eliminates previous limitations of homogeneous assays. The assay uses a gradiometer sensor configuration combined with precise microfluidic sample handling. This enables simultaneous differential measurement sample containing a synthesized Vibrio cholerae target and a negative control sample, which reduces the background signal and increases the readout speed. Very low concentrations of targets down to femtomolar levels are thus detectable without any additional amplification of the number of targets. Our homogeneous differential magnetic assay method opens new possibilities for rapid and highly sensitive diagnostics at the point of care.
|
|
| 9. |
- Forsgren, Johan, et al.
(författare)
-
Co-loading of bisphosphonates and antibiotics to a biomimetic hydroxyapatite coating.
- 2011
-
Ingår i: Biotechnology letters. - : Springer Science and Business Media LLC. - 1573-6776 .- 0141-5492. ; 33:6, s. 1265-8
-
Tidskriftsartikel (refereegranskat)abstract
- We have incorporated bisphosphonates and antibiotics simultaneously into a biomimetic hydroxyapatite implant coating aiming to use the interaction between drug-molecules and hydroxyapatite to enable local release of the two different substances to obtain a dual biological effect. A sustained release over for 43h of antibiotics (cephalothin) was achieved without negative interference from the presence of the bisphosphonate (clodronate) which, in turn, successfully bonded to the coating surface. To our knowledge, this is the first study that indicates the possibility to simultaneously incorporate both antibiotics and bisphosphonates to an implant coating, a strategy that is believed to improve implant stability and reduce implant-related infections.
|
|
| 10. |
- Grandfield, Kathryn, 1986-, et al.
(författare)
-
Ultrastructural characterisation of the hydroxyapatite–coated pedicle screw and human bone interface
- 2012
-
Ingår i: International Journal of Nano and Biomaterials. - 1752-8933 .- 1752-8941. ; 4:1, s. 1-11
-
Tidskriftsartikel (refereegranskat)abstract
- The early fixation of pedicle screws is crucial for improving spinal stabilisation. Firm and immediate fixation between pedicle screws and bone prevents aseptic loosening and implant failure. Coating with hydroxyapatite is a possible method to improve the fixation of metallic implants in bone. In this study, scanning transmission electron microscopy (STEM) has been used to investigate the ultrastructure of the plasma–sprayed hydroxyapatite coating and human bone interface in detail. Focused ion beam sample preparation also enabled the investigation of the bone–lacunae interface. An intimate contact and elemental analysis between bone and HA coatings suggests bioactive fixation. Therefore, coating with hydroxyapatite leads to enhanced biocompatibility at the ultrastructural level and may lead to improved early and long–term fixation of pedicle screws.
|
|
