| 1. |
- Ahlgren, Serina, et al.
(författare)
-
Review of methodological choices in LCA of biorefinery systems - key issues and recommendations
- 2015
-
Ingår i: Biofuels, Bioproducts and Biorefining. - : Wiley. - 1932-1031 .- 1932-104X. ; 9:5, s. 606-619
-
Forskningsöversikt (refereegranskat)abstract
- The current trend in biomass conversion technologies is toward more efficient utilization of biomass feedstock in multiproduct biorefineries. Many life-cycle assessment (LCA) studies of biorefinery systems have been performed but differ in how they use the LCA methodology. Based on a review of existing LCA standards and guidelines, this paper provides recommendations on how to handle key methodological issues when performing LCA studies of biorefinery systems. Six key issues were identified: (i) goal definition, (ii) functional unit, (iii) allocation of biorefinery outputs, (iv) allocation of biomass feedstock, (v) land use, and (vi) biogenic carbon and timing of emissions. Many of the standards and guidelines reviewed here provide only general methodological recommendations. Some make more specific methodological recommendations, but these often differ between standards. In this paper we present some clarifications (e.g. examples of research questions and suitable functional units) and methodological recommendations (e.g. on allocation).
|
|
| 2. |
- Ali, Sharafat, Associate Professor, 1976-, et al.
(författare)
-
Effect of composition on the thermal properties and structure of M-Al-Si-O-N glasses, M = Na, Mg, Ca
- 2024
-
Ingår i: Progress in Solid State Chemistry. - : Elsevier. - 0079-6786 .- 1873-1643. ; 74
-
Forskningsöversikt (refereegranskat)abstract
- The primary objective of this study is to explore the relationship between the composition, structure, and thermal characteristics of M-Al-Si-O-N glasses, with M representing sodium (Na), magnesium (Mg), or calcium (Ca). The glasses were prepared by melting in a quartz crucible at 1650 degrees C and AlN precursor (powder) was utilized as a nitrogen source. The measured thermal properties studied were glass transition temperature (Tg), crystallization temperature (Tc), glass stability, viscosity, and thermal expansion coefficient (alpha). The findings indicate that increasing the aluminum content leads to higher glass transition, crystallization temperatures, and viscosities. In contrast, fragility values increase with the Al contents, while modifier elements and silicon content influence thermal expansion coefficient values. FTIR analysis revealed that in all glasses, the dominant IR bands are attributed to the presence of Q2 and Q3 silicate units. The effect of Al is observed as a progressive polymerization of the silicate network resulting from the glass-forming role of Al2O3. In most samples, the Q4 silicate mode was also observed, strongly related to the high Al content. Overall, the study shows that the complexity of composition-property correlations where the structural changes affect the properties of Mg/Ca-based oxynitride glasses has potential implications for their use in various technological fields.
|
|
| 3. |
- Andersson, Jonas, et al.
(författare)
-
Hello human, can you read my mind?
- 2017
-
Ingår i: ERCIM News. - Sophia Antipolis Cedex : European Research Consortium for Informatics and Mathematics (ERCIM). - 0926-4981 .- 1564-0094. ; :109, s. 36-37
-
Forskningsöversikt (refereegranskat)abstract
- For safety reasons, autonomous vehicles should communicate their intent rather than explicitly invite people to act. At RISE Viktoria in Sweden, we believe this simple design principle will impact how autonomous vehicles are experienced in the future.
|
|
| 4. |
- Andersson, Johnn, 1983, et al.
(författare)
-
On the functional and structural scope of technological innovation systems – A literature review with conceptual suggestions
- 2023
-
Ingår i: Environmental Innovation and Societal Transitions. - 2210-4224 .- 2210-4232. ; 49
-
Forskningsöversikt (refereegranskat)abstract
- This paper reviews how the functional and structural scope of technological innovation systems (TIS) are understood in the literature. We find that it is often unclear if the system function involves innovation, production or both, and a lack of agreement as to whether structural elements are social or social and technical. Since these issues risk hindering cumulative knowledge development and conceptual advancements, we argue that a clear and shared underlying system model is needed. Taking steps in this direction, we propose that the function of a TIS is to develop and shape a specific technology; that this technology can be understood as a production-consumption system; and that the structural elements of a TIS are social, technical and possibly ecological. In addition, we offer guidance to boundary-setting in empirical case studies. We hope that the paper will inspire continued conceptual development in the TIS community and beyond.
|
|
| 5. |
- Argyropoulos, Dimitris D. S., et al.
(författare)
-
Kraft Lignin: A Valuable, Sustainable Resource, Opportunities and Challenges
- 2023
-
Ingår i: ChemSusChem. - : John Wiley and Sons Inc. - 1864-5631 .- 1864-564X. ; 16:23
-
Forskningsöversikt (refereegranskat)abstract
- Kraft lignin, a by-product from the production of pulp, is currently incinerated in the recovery boiler during the chemical recovery cycle, generating valuable bioenergy and recycling inorganic chemicals to the pulping process operation. Removing lignin from the black liquor or its gasification lowers the recovery boiler load enabling increased pulp production. During the past ten years, lignin separation technologies have emerged and the interest of the research community to valorize this underutilized resource has been invigorated. The aim of this Review is to give (1) a dedicated overview of the kraft process with a focus on the lignin, (2) an overview of applications that are being developed, and (3) a techno-economic and life cycle asseeements of value chains from black liquor to different products. Overall, it is anticipated that this effort will inspire further work for developing and using kraft lignin as a commodity raw material for new applications undeniably promoting pivotal global sustainability concerns.
|
|
| 6. |
- Arrhenius, Karine, et al.
(författare)
-
Suitability of different containers for the sampling and storage of biogas and biomethane for the determination of the trace-level impurities - A review
- 2016
-
Ingår i: Analytica Chimica Acta. - : Elsevier. - 0003-2670 .- 1873-4324. ; 902, s. 22-32
-
Forskningsöversikt (refereegranskat)abstract
- The traceable and accurate measurement of biogas impurities is essential in order to robustly assess compliance with the specifications for biomethane being developed by CEN/TC408. An essential part of any procedure aiming to determinate the content of impurities is the sampling and the transfer of the sample to the laboratory. Key issues are the suitability of the sample container and minimising the losses of impurities during the sampling and analysis process. In this paper, we review the state-of-the-art in biogas sampling with the focus on trace impurities. Most of the vessel suitability studies reviewed focused on raw biogas. Many parameters need to be studied when assessing the suitability of vessels for sampling and storage, among them, permeation through the walls, leaks through the valves or physical leaks, sorption losses and adsorption effects to the vessel walls, chemical reactions and the expected initial concentration level. The majority of these studies looked at siloxanes, for which sampling bags, canisters, impingers and sorbents have been reported to be fit-for-purpose in most cases, albeit with some limitations. We conclude that the optimum method requires a combination of different vessels to cover the wide range of impurities commonly found in biogas, which have a wide range of boiling points, polarities, water solubilities, and reactivities. The effects from all the parts of the sampling line must be considered and precautions must be undertaken to minimize these effects. More practical suitability tests, preferably using traceable reference gas mixtures, are needed to understand the influence of the containers and the sampling line on sample properties and to reduce the uncertainty of the measurement.
|
|
| 7. |
- Brodin, Malin, et al.
(författare)
-
Lignocellulosics as sustainable resources for production of bioplastics : a review
- 2017
-
Ingår i: Journal of Cleaner Production. - : Elsevier Ltd. - 0959-6526 .- 1879-1786. ; 162, s. 646-664
-
Forskningsöversikt (refereegranskat)abstract
- The bio-based economy requires a sustainable utilization of bioresources for production of a range of products, including pulp, paper, chemicals, biofuel and bioplastics. Currently, various types of bioplastics are produced industrially, competing in performance and price with the conventional fossil-oil based plastics. However, there is also a major interest in utilizing non-food crops, such as lignocellulosics, for production of drop-in polymers or new dedicated bioplastics. Lignocellulosic resources have a potential to replace plastics and materials, which have been traditionally based on fossil resources. This is important, as the development of high performance bio-based and renewable materials is one important factor for sustainable growth of the bio-based industry. However, production of bioplastics from forestry biomass requires a dedicated fractionation into the major components, i.e. cellulose, hemicelluloses and lignin, effective purification processes and cost-effective routes for conversion into monomers and platform molecules, utilized as a basis for bioplastics production. These processes are now technologically demanding and not profitable. The intention of this work was thus to review the current advances that have been made during the years within fractionation and purification of lignocelluloses and the processes that may feasible for production of bioplastics, based on wood components.
|
|
| 8. |
- Bundschuh, J., et al.
(författare)
-
Arsenic in Latin America : New findings on source, mobilization and mobility in human environments in 20 countries based on decadal research 2010-2020
- 2020
-
Ingår i: Critical reviews in environmental science and technology. - : Taylor and Francis Inc.. - 1064-3389 .- 1547-6537. ; , s. 1-119
-
Forskningsöversikt (refereegranskat)abstract
- Today (year 2020), the globally recognized problem of arsenic (As) contamination of water resources and other environments at toxic levels has been reported in all of the 20 Latin American countries. The present review indicates that As is prevalent in 200 areas across these countries. Arsenic is naturally released into the environment and mobilized from geogenic sources comprising: (i) volcanic rocks and emissions, the latter being transported over thousands of kilometers from the source, (ii) metallic mineral deposits, which get exposed to human beings and livestock through drinking water or food chain, and (iii) As-rich geothermal fluids ascending from deep geothermal reservoirs contaminate freshwater sources. The challenge for mitigation is increased manifold by mining and related activities, as As from mining sites is transported by rivers over long distances and even reaches and contaminates coastal environments. The recognition of the As problem by the authorities in several countries has led to various actions for remediation, but there is a lack of long-term strategies for such interventions. Often only total As concentration is reported, while data on As sources, mobilization, speciation, mobility and pathways are lacking which is imperative for assessing quality of any water source, i.e. public and private.
|
|
| 9. |
- Carlsson, Per, et al.
(författare)
-
Experiments and mathematical models of black liquor gasification – influence of minor gas components on temperature, gas composition, and fixed carbon conversion
- 2010
-
Ingår i: TAPPI Journal. - 0734-1415. ; 9:9, s. 15-24
-
Forskningsöversikt (refereegranskat)abstract
- In this work, predictions from a reacting Computational Fluid Dynamics (CFD) model of a gasification reactor are compared to experimentally obtained data from an industrial pressurized black liquor gasification plant. The data consists of gas samples taken from the hot part of the gasification reactor using a water cooled sampling probe. During the considered experimental campaign, the oxygen-to-black liquor equivalence ratio (λ) was varied in three increments, which resulted in a change in reactor temperature and gas composition. The presented numerical study consists of CFD and thermodynamic equilibrium calculations in the considered λ-range using boundary conditions obtained from the experimental campaign. Specifically, the influence of methane concentration on the gas composition is evaluated using both CFD and thermodynamic equilibrium. The results show that the main gas components (H2, CO, CO2) can be predicted within a relative error of 5% using CFD if the modeled release of H2S and CH4 are specified a priori. In addition, the calculations also show that the methane concentration has large influence on the reactor outlet temperature and final carbon conversion.
|
|
| 10. |
- Cheregi, Otilia, et al.
(författare)
-
Microalgae biotechnology in Nordic countries - the potential of local strains.
- 2019
-
Ingår i: Physiologia plantarum. - : Wiley. - 1399-3054 .- 0031-9317. ; 166:1, s. 438-450
-
Forskningsöversikt (refereegranskat)abstract
- Climate change, energy use and food security are the main challenges that our society is facing nowadays. Biofuels and feedstock from microalgae can be part of the solution if high and continuous production is to be ensured. This could be attained in year-round, low cost, outdoor cultivation systems using strains that are not only champion producers of desired compounds but also have robust growth in a dynamic climate. Using microalgae strains adapted to the local conditions may be advantageous particularly in Nordic countries. Here, we review the current status of laboratory and outdoor-scale cultivation in Nordic conditions of local strains for biofuel, high-value compounds and water remediation. Strains suitable for biotechnological purposes were identified from the large and diverse pool represented by saline (NE Atlantic Ocean), brackish (Baltic Sea) and fresh water (lakes and rivers) sources. Energy-efficient annual rotation for cultivation of strains well adapted to Nordic climate has the potential to provide high biomass yields for biotechnological purposes.
|
|
