| 1. |
|
|
| 2. |
|
|
| 3. |
- Adekunle, Kayode, et al.
(författare)
-
High performance natural fibre hybrid composites based on biobased thermoset resins for use in technical applications
- 2009
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Health related issues, stringent environmental protection policies, search for cost effective and alternative materials and quest for renewability, sustainability and high performance materials for technical applications has led to an intense research in manufacturing biobased composites which are based on renewable thermosetting resins and natural fibres. The combination of biobased thermosetting resins with two different natural fibre reinforcements could lead to improved mechanical properties of the composite. Biobased thermoset polymers are comparable to the synthetic thermosetting polymers from petrochemicals. In this study, two different biobased resins were used as matrix and both non woven flax fibre and woven flax fabric were combined as reinforcements. The composites were made by compression moulding process. The fibres were hand laid-up and impregnation was done manually. The curing temperature was 170°С and at 40 bar. The stacking sequence of the fibres was in different orientations such as 0º, +45º and 90º. The manufactured hybrid composites have high tensile strength and stiffness and the flexural strength and modulus was also high. These composites can compete favourably with glass fibre reinforced composites in terms of strength and stiffness.1, 2 A tensile strength of about 119 MPa and Young’s modulus of 13.8 GPa was achieved, while the flexural strength and modulus is about 201 MPa and 24 GPa respectively. For the purpose of comparison, composites were made with the combination of woven fabric and e-glass fibre. One ply of an e-glass fibre mat was put in the mid-plane and this increased the tensile strength considerably up to 168 MPa. Some of the composites were made with the resin blended with styrene and the results show a higher modulus.
|
|
| 4. |
|
|
| 5. |
- Adekunle, Kayode, et al.
(författare)
-
Preparation of biobased composites using novel thermoset polymers from soybean oil and a natural fibre reinforcement
- 2009
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Health related issues, stringent environmental protection policies, search for cost effective and alternative materials, crave for renewability and sustainability and quest for high performance materials for structural applications give the motivation for research in polymer composites and material science. Due to the health, safety and environmental concerns over the conventional synthetic materials and the legislation against their usage both in domestic and industrial applications, alternatives sources that will be comparable in properties are being sought. There is an emerging market for biodegradable polymers which is expected to increase substantially in the coming years.[1] Preparation of Composites Airlaid and woven flax fibre mats were first treated with 4% sodium hydroxide solution for one hour and then washed with plenty of water. This was done in order to remove any residual impurities. The fibres were dried at room temperature for 24 hr and then dried in a vacuum oven for 1hr at a temperature of 105°С. The 8 sheets of the fibre were hand laid cross- wisely and the impregnation was done manually. The fibre/ resin ratio was about 60% to 40%. Methacrylated soybean oil, methacrylic anhydride and acetic anhydride modified soybean oil were the synthesized matrices used. The compression moulding was done at a temperature of 170°С for 5 min at 40bar. Characterisations The tensile testing was performed based on an ISO-test method for tensile tests on plastic materials. The Charpy impact strength of unnotched specimens was evaluated in accordance with ISO 179 using a Zwick test instrument and scanning electron microscopy analysis was done on the fractured specimens. The composites showed various mechanical properties, having impact strengths between 24 and 63 kJ/m² and tensile strength up to 51MPa.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Ali, Majid, et al.
(författare)
-
Optimization of oCVD Process for the Production of Conductive Fibers
- 2011
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Electro active textile fibers are key components in smart and interactive textile applications. In our previous study, we produced poly(3,4-ethylenedioxythiophene) (PEDOT) coat edviscose fibers by using oxidative chemical vapordeposition (OCVD) technique. We tried FeCl3 as oxidant and found optimum reaction conditions at which better electrical as well as mechanical properties of conductive fibers could be achieved.
|
|
| 9. |
|
|
| 10. |
|
|
