| 1. |
- Abbas, Ghazanfar, et al.
(författare)
-
Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell
- 2017
-
Ingår i: International Journal of Modern Physics B. - : WORLD SCIENTIFIC PUBL CO PTE LTD. - 0217-9792. ; 31:27
-
Tidskriftsartikel (refereegranskat)abstract
- Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn-0.60/CU0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer's equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600 degrees C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm(2) was measured at 550 degrees C.
|
|
| 2. |
- Abbas, Ghazanfar, et al.
(författare)
-
Electrochemical study of nanostructured electrode for low-temperature solid oxide fuel cell (LTSOFC)
- 2014
-
Ingår i: International Journal of Energy Research. - : Hindawi Limited. - 0363-907X .- 1099-114X. ; 38:4, s. 518-523
-
Tidskriftsartikel (refereegranskat)abstract
- Zn-based nanostructured Ba0.05Cu0.25Fe0.10Zn0.60O (BCFZ) oxide electrode material was synthesized by solid-state reaction for low-temperature solid oxide fuel cell. The cell was fabricated by sandwiching NK-CDC electrolyte between BCFZ electrodes by dry press technique, and its performance was assessed. The maximum power density of 741.87 mW-cm(-2) was achieved at 550 degrees C. The crystal structure and morphology were characterized by X-ray diffractometer (XRD) and SEM. The particle size was calculated to be 25 nm applying Scherer's formula from XRD data. Electronic conductivities were measured with the four-probe DC method under hydrogen and air atmosphere. AC Electrochemical Impedance Spectroscopy of the BCFZ oxide electrode was also measured in hydrogen atmosphere at 450 degrees C.
|
|
| 3. |
- Abbas, Ghazanfar, et al.
(författare)
-
Preparation and characterization of nanocomposite calcium doped ceria electrolyte with alkali carbonates (NK-CDC) for SOFC
- 2010
-
Ingår i: ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010. - : ASME Press. - 9780791844052 ; , s. 427-432
-
Konferensbidrag (refereegranskat)abstract
- The entire world's challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid Oxide Fuel Cells (SOFCs) are believed to be the best alternative source which converts chemical energy into electricity without combustion. Nanostructured study is required to develop highly ionic conductive electrolyte for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O 1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M= Na and K) electrolyte was prepared by co-precipitation method in this study. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology was characterized by X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM). The particle size was calculated in the range of 10-20nm by Scherrer's formula and compared with SEM and TEM results. The ionic conductivity was measured by using AC Electrochemical Impedance Spectroscopy (EIS) method. The activation energy was also evaluated. The performance of the cell was measured 0.567W/cm2 at temperature 550°C with hydrogen as a fuel.
|
|
| 4. |
- Abbas, Ghazanfar, et al.
(författare)
-
Preparation and Characterization of Nanocomposite Calcium Doped Ceria Electrolyte With Alkali Carbonates (NK-CDC) for SOFC
- 2011
-
Ingår i: Journal of Fuel Cell Science and Technology. - : ASME International. - 1550-624X .- 1551-6989. ; 8:4, s. 041013-
-
Tidskriftsartikel (refereegranskat)abstract
- The entire world's challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid oxide fuel cells (SOFCs) are believed to be the best alternative source, which converts chemical energy into electricity without combustion. Nanostructure study is required to develop highly ionic conductive electrolytes for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M = Na and K) electrolyte was prepared by coprecipitation method. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology were characterized by an X-ray diffractometer, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (TEM). The particle size was calculated in the range 10-20 nm by Scherer's formula and compared with SEM and TEM results. The ionic conductivity was measured by using ac electrochemical impedance spectroscopy method. The activation energy was also evaluated. The performance of the cell was measured 0.567 W/cm(2) at temperature 550 degrees C with hydrogen as a fuel.
|
|
| 5. |
- Abbas, Ghazanfar, et al.
(författare)
-
Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC
- 2012
-
Ingår i: Nanoscience and Nanotechnology Letters. - : American Scientific Publishers. - 1941-4900 .- 1941-4919. ; 4:4, s. 389-393
-
Tidskriftsartikel (refereegranskat)abstract
- Composite electrodes of Cu0.16Ni0.27Zn0.37Ce0.16Gd0.04 (CNZGC) oxides have been successfully synthesized by solid state reaction method as anode material for low temperature solid oxide fuel cell (LTSOFC). These electrodes are characterized by XRD followed by sintering at various time periods and temperatures. Particle size of optimized composition was calculated 40-85 nm and sintered at 800 degrees C for 4 hours. Electrical conductivity of 4.14 S/cm was obtained at a temperature of 550 degrees C by the 4-prob DC method. The activation energy was calculated 4 x 10(-2) eV at 550 degrees C. Hydrogen was used as fuel and air as oxidant at anode and cathode sides respectively. I-V/I-P curves were obtained in the temperature range of 400-550 degrees C. The maximum power density was achieved for 570 mW/cm(2) at 550 degrees C.
|
|
| 6. |
- Abbas, Ghazanfar, et al.
(författare)
-
Synthesize and characterization of nanocomposite anodes for low temperature solid oxide fuel cell
- 2015
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 40:1, s. 891-897
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells have much capability to become an economical alternative energy conversion technology having appropriate materials that can be operated at comparatively low temperature in the range of 400-600 degrees C. The nano-scale engineering has been incorporated to improve the catalytic activity of anode materials for solid oxide fuel cells. Nanostructured Al0.10NixZn0.90-xO oxides were prepared by solid state reaction, which were then mixed with the prepared Gadolinium doped Ceria GDC electrolyte. The crystal structure and surface morphology were characterized by XRD and SEM. The particle size was evaluated by XRD data and found in the range of 20-50 nm, which was then ensured by SEM pictures. The pellets of 13 mm diameter were pressed by dry press technique and electrical conductivities (DC and AC) were determined by four probe techniques and the values have been found to be 10.84 and 4.88 S/cm, respectively at hydrogen atmosphere in the temperature range of 300-600 degrees C. The Electrochemical Impedance Spectroscopy (EIS) analysis exhibits the pure electronic behavior at hydrogen atmosphere. The maximum power density of ANZ-GDC composite anode based solid oxide fuel cell has been achieved 705 mW/cm(2) at 550 degrees C.
|
|
| 7. |
- Imran, Syed Khalid, et al.
(författare)
-
Characterization and Development of Bio-Ethanol Solid Oxide Fuel Cell
- 2011
-
Ingår i: Journal of Fuel Cell Science and Technology. - : ASME International. - 1550-624X .- 1551-6989. ; 8:6, s. 061014-
-
Tidskriftsartikel (refereegranskat)abstract
- Bio-ethanol based fuel cell is an energy source with a promising future. The low temperature solid oxide fuel cell fed by direct bio-ethanol is receiving considerable attention as a clean and highly efficient for the production of both electricity and high grade waste heat. The comparison of fuel cell performance with different metal-oxide based electrodes was investigated. The power densities of 584 mW cm(-2) and 514 mW cm(-2) at 520 degrees C and 570 degrees C respectively were found. The effect of electrode catalyst function, ethanol concentration on the electrical performance was investigated at different temperature ranged in between 300 degrees C-600 degrees C. The effect of deposited carbon on the electrode was investigated by energy-dispersive X-ray spectroscopy and scanning electron microscope after testing the cell with bio-ethanol.
|
|
| 8. |
- Khan, M. Ajmal, et al.
(författare)
-
Effect of titania concentration on the grain boundary conductivity of calcium-doped ceria electrolyte
- 2014
-
Ingår i: Ceramics International. - : Elsevier BV. - 0272-8842 .- 1873-3956. ; 40:7, s. 9775-9781
-
Tidskriftsartikel (refereegranskat)abstract
- A solid-state technique was used to synthesize ceria-based (CDC-xT, in which x=0-1 mol%) solid electrolyte ceramics. The effects of doping the ceramic solid electrolyte (CDC) with titanium oxide were studied with regard to densification, crystal structure, morphology, electro-impedance spectroscopy and fuel cell performance. TiO2 doping afforded materials a 95% relative density at 940 degrees C, approximately 200 degrees C lower than the temperature required without titanium oxide. The addition of titanium oxide (TiO2) reduced the CDC sintering temperature and significantly improved the grain boundary conduction. The minimum grain boundary resistivity was obtained at 0.8 mol% TiO2. X-ray diffraction (XRD) results showed that the lattice parameters enhanced with increased titanium oxide concentrations up to 0.8 mol%, revealing the solubility limit for Caria's fluorite structure. The optimum doping level (0.8 mol%) is provided maximum conductivity. Conductivities were measured using EIS (Electrochemical Impedance Spectroscopy) with a two-probe method, and the activation energies were calculated using the Arrhenius plots. The maximum power density (660 mW/cm(2)) was achieved with CDC 0.8T electrolyte at 650 degrees C using LiCuZnNi oxide electrodes.
|
|
| 9. |
- Khan, M. Ajmal, et al.
(författare)
-
Synthesize and characterization of ceria based nano-composite materials for low temperature solid oxide fuel cell
- 2018
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 43:12, s. 6310-6317
-
Tidskriftsartikel (refereegranskat)abstract
- The present study is focused on ceria based mixed (ionic and electronic conductor) composite Al0.05Ni0.1Ti0.05Zn0.80-SDC (ATZN-SDC) oxide material was prepared by solid state reaction, which can be used as anode materials for solid oxide fuel cell. The effect of Ti and Al oxides were analyzed on the NiZn-SDC composite with respect to its conductivity and catalytic activity in hydrogen atmosphere. The average crystallite size of the composite was found to be 40-100 nm by XRD and SEM. The DC conductivity was determined by 4-probe technique. The electrochemical impedance spectrum (EIS) was also examined in hydrogen atmosphere within a temperature range of 350-550 degrees C. The maximum power density 370 mW/cm(2) was achieved at 650 degrees C.
|
|
| 10. |
- Qin, Haiying, et al.
(författare)
-
Direct biofuel low-temperature solid oxide fuel cells
- 2011
-
Ingår i: ENERGY & ENVIRONMENTAL SCIENCE. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 4:4, s. 1273-1276
-
Tidskriftsartikel (refereegranskat)abstract
- A low-temperature solid oxide fuel cell system was developed to use bioethanol and glycerol as fuels directly. This system achieved a maximum power density of 215 mW cm(-2) by using glycerol at 580 degrees C and produced a great impact on sustainable energy and the environment.
|
|
