| 1. |
- Ahlbom, Anders, 1993, et al.
(författare)
-
Using Isopropanol as a Capping Agent in the Hydrothermal Liquefaction of Kraft Lignin in Near-Critical Water
- 2021
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 14:4
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, Kraft lignin was depolymerised by hydrothermal liquefaction in near-critical water (290-335 degrees C, 250 bar) using Na2CO3 as an alkaline catalyst. Isopropanol was used as a co-solvent with the objective of investigating its capping effect and capability of reducing char formation. The resulting product, which was a mixture of an aqueous liquid, containing water-soluble organic compounds, and char, had a lower sulphur content than the Kraft lignin. Two-dimensional nuclear magnetic resonance studies of the organic precipitates of the aqueous phase and the char indicated that the major lignin bonds were broken. The high molar masses of the char and the water-soluble organics, nevertheless, indicate extensive repolymerisation of the organic constituents once they have been depolymerised from the lignin. With increasing temperature, the yield of char increased, although its molar mass decreased. The addition of isopropanol increased the yield of the water-soluble organic products and decreased the yield of the char as well as the molar masses of the products, which is indicative of a capping effect.
|
|
| 2. |
|
|
| 3. |
- Tettamanti, Giorgio, et al.
(författare)
-
Long-term effect of mobile phone use on sleep quality : Results from the cohort study of mobile phone use and health (COSMOS)
- 2020
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 140
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Effects of radiofrequency electromagnetic field exposure (RF-EMF) from mobile phone use on sleep quality has mainly been investigated in cross-sectional studies. The few previous prospective cohort studies found no or inconsistent associations, but had limited statistical power and short follow-up. In this large prospective cohort study, our aim was to estimate the effect of RF-EMF from mobile phone use on different sleep outcomes.Materials and methods: The study included Swedish (n = 21,049) and Finnish (n = 3120) participants enrolled in the Cohort Study of Mobile Phone Use and Health (COSMOS) with information about operator-recorded mobile phone use at baseline and sleep outcomes both at baseline and at the 4-year follow-up. Sleep disturbance, sleep adequacy, daytime somnolence, sleep latency, and insomnia were assessed using the Medical Outcome Study (MOS) sleep questionnaire.Results: Operator-recorded mobile phone use at baseline was not associated with most of the sleep outcomes. For insomnia, an odds ratio (OR) of 1.24, 95% CI 1.03-1.51 was observed in the highest decile of mobile phone call-time (> 258 min/week). With weights assigned to call-time to account for the lower RF-EMF exposure from Universal Mobile Telecommunications Service (UMTS, 3G) than from Global System for Mobile Communications (GSM, 2G) the OR was 1.09 (95% CI 0.89-1.33) in the highest call-time decile.Conclusion: Insomnia was slightly more common among mobile phone users in the highest call-time category, but adjustment for the considerably lower RF-EMF exposure from the UMTS than the GSM network suggests that this association is likely due to other factors associated with mobile phone use than RF-EMF. No association was observed for other sleep outcomes. In conclusion, findings from this study do not support the hypothesis that RF-EMF from mobile phone use has long-term effects on sleep quality.
|
|
| 4. |
- Ahlbom, Anders, 1993
(författare)
-
Hydrothermal Liquefaction of Kraft Lignin - The influence of capping agents and residence time
- 2021
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In the context of exploring alternatives to replace fossil resources, lignin has been acknowledged as a renewable source of various aromatic compounds that have the potential of being precursors to chemicals as well as fuel additives. Originating from lignocellulosic biomass such as wood, lignin is an amorphous polymer with a high content of aromatic units and, in order to harness these units, it must be depolymerised. A major problem with current depolymerisation techniques, however, is that lignin repolymerises after being depolymerised, and forms an undesirable char fraction. The addition of capping agents and fine-tuning the reaction conditions can be used to mitigate such formation of char. This work has investigated the depolymerisation of kraft lignin in hydrothermal conditions under varying temperatures (290-335 °C), residence times (1-12 min) and charges of isopropanol (IPA/dry lignin, 0-4.9) which, aside from being a co-solvent, was hypothesised as acting as a capping agent. The influence of these reaction parameters on the molecular weights, yields and elemental compositions of the products was studied, along with changes in the molecular structure compared to the starting lignin. The product is a suspension of solid material, i.e. char, in an aqueous phase and thus any desired organic liquid phase requires extraction from the aqueous product. While the yield of char increased with temperature and residence time, it decreased with increasing isopropanol loading, suggesting that the isopropanol does in fact act as a capping agent. Most of the lignin forms a water-soluble fraction that precipitates when the aqueous product phase is acidified, thereby forming the precipitated solids fraction (PS). The components remaining dissolved after acidification of the product phase are known as acid soluble organics (ASO). A portion of the ASO fraction was aromatic monomers, with guaiacol dominating: this result was expected since the lignin was sourced from softwood. The amount of such monomers increased with residence time in the reactor. Molecular weight analyses showed a rapid depolymerisation of the lignin within 1 min of hydrothermal liquefaction (HTL) treatment via a significant decrease in the molecular weight of all product fractions: char, PS and ASO. Moreover, the carbon-oxygen inter-unit linkages were found to break in this timeframe as well. The repolymerisation reactions started to exceed depolymerisation between residence times of 4 and 12 min, causing the weight average molecular weight (Mw) to increase again. Although minimising the residence time allows the char yield and Mw to be kept low, more monomers were formed at longer residence times. This calls for careful tuning of the residence time in the HTL of kraft lignin.
|
|
| 5. |
- Ahlbom, Anders, 1993, et al.
(författare)
-
Towards understanding kraft lignin depolymerisation under hydrothermal conditions
- 2021
-
Ingår i: Holzforschung. - : Walter de Gruyter GmbH. - 1437-434X .- 0018-3830. ; 76:1, s. 37-48
-
Tidskriftsartikel (refereegranskat)abstract
- Kraft lignin depolymerisation using hydrothermal liquefaction suffers from the formation of char, resulting in a decreased product yield as well as causing operational problems. While this may be mitigated by the addition of capping agents such as phenol and isopropanol, other reaction parameters, for example reaction time and temperature, are also important for the product yields. In this work, the effect of short reaction times on the hydrothermal liquefaction of kraft lignin in an alkaline water and isopropanol mixture was investigated at 1-12 min and 290 °C. The results show that there were swift initial reactions: the major ether bonds in the lignin were broken within the first minute of reaction, and the molecular weight of all product fractions was halved at the very least. Longer reaction times, however, do not cause as pronounced structural changes as the initial reaction, indicating that a recalcitrant carbon-carbon skeleton remained in the products. Nevertheless, the yields of both char and monomers increased slowly with increasing reaction time. The swift initial depolymerising reactions were therefore followed by slower repolymerisation as well as a slow formation of monomers and dimers, which calls for careful tuning of the reaction time.
|
|
| 6. |
- Dobbins, Sara E., et al.
(författare)
-
Common variation at 10p12.31 near MLLT10 influences meningioma risk
- 2011
-
Ingår i: Nature Genetics. - London : Nature America, Inc.. - 1061-4036 .- 1546-1718. ; 43:9, s. 825-827
-
Tidskriftsartikel (refereegranskat)abstract
- To identify susceptibility loci for meningioma, we conducted a genome-wide association study of 859 affected individuals (cases) and 704 controls with validation in two independent sample sets totaling 774 cases and 1,764 controls. We identified a new susceptibility locus for meningioma at 10p12.31 (MLLT10, rs11012732, odds ratio = 1.46, P(combined) = 1.88 x 10(-14)). This finding advances our understanding of the genetic basis of meningioma development.
|
|
