| 1. |
- Papaevangelou, T., et al.
(författare)
-
ESS nBLM : Beam loss monitors based on fast neutron detection
- 2018
-
Ingår i: HB2018 - Proceedings of the 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams. - 9783954502028 ; , s. 404-409
-
Konferensbidrag (refereegranskat)abstract
- A new type of Beam Loss Monitor (BLM) system is being developed for use in the European Spallation Source (ESS) linac, primarily aiming to cover the low energy part (proton energies between 3-100 MeV). In this region of the linac, typical BLM detectors based on charged particle detection (i.e. Ionization Chambers) are not appropriate because the expected particle fields will be dominated by neutrons and photons. Another issue is the photon background due to the RF cavities, which is mainly due to field emission from the electrons from the cavity walls, resulting in bremsstrahlung photons. The idea for the ESS neutron sensitive BLM system (ESS nBLM) is to use Micromegas detectors specially designed to be sensitive to fast neutrons and insensitive to low energy photons (X and gammas). In addition, the detectors must be insensitive to thermal neutrons, because those neutrons may not be directly correlated to beam losses. The appropriate configuration of the Micromegas operating conditions will allow excellent timing, intrinsic photon background suppression and individual neutron counting, extending thus the dynamic range to very low particle fluxes.
|
|
| 2. |
- Buxton, Jessica L., et al.
(författare)
-
Multiple Measures of Adiposity Are Associated with Mean Leukocyte Telomere Length in the Northern Finland Birth Cohort 1966
- 2014
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 9:6, s. Art. no. e99133-
-
Tidskriftsartikel (refereegranskat)abstract
- Studies of leukocyte telomere length (LTL) and adiposity have produced conflicting results, and the relationship between body mass index (BMI) and telomere length throughout life remains unclear. We therefore tested association of adult LTL measured in 5,598 participants with: i) childhood growth measures (BMI and age at adiposity rebound (AR)); ii) change in BMI from childhood to adulthood and iii) adult BMI, waist-to-hip ratio (WHR), body adiposity index (BAI). Childhood BMI at AR was positively associated with LTL at 31 years in women (P = 0.041). Adult BMI and WHR in both men (P = 0.025 and P = 0.049, respectively) and women (P = 0.029 and P = 0.008, respectively), and BAI in women (P = 0.021) were inversely associated with LTL at 31 years. An increase in standardised BMI between early childhood and adulthood was associated with shorter adult LTL in women (P = 0.008). We show that LTL is inversely associated with multiple measures of adiposity in both men and women. Additionally, BMI increase in women from childhood to adulthood is associated with shorter telomeres at age 31, potentially indicating accelerated biological ageing.
|
|
| 3. |
- Alves, H. B. M., et al.
(författare)
-
Introducing a survey methodology for assessing LoRaWAN coverage in Smart Campus scenarios
- 2020
-
Ingår i: Proceedings. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728148922 ; , s. 708-712
-
Konferensbidrag (refereegranskat)abstract
- The LoRa is a Low Power Wide Area Network (LPWAN) technology. It has been proposed as a viable wireless connection method for the implementation of the Internet of Things (IoT), thanks to its wide coverage, low complexity and low energy consumption. Several studies ave been carried out about real coverage performance. In this article, a new test methodology for the experimental evaluation of LoRaWAN coverage within a smart campus is presented. The new approach consists in the definition of devices, method and procedures. The architecture of the mobile node is outlined. The survey procedure is based on a mapping phase, necessary to highlight the LoRaWAN coverage in the test area. Finally, a use case is described in the article: it is not intended for evaluating a specific implementation, but for assessing the suitability of the proposed methodology. The use case results demonstrate the effectiveness of the survey methodology in a real smart campus. © 2020 IEEE.
|
|
| 4. |
- Alves, L., et al.
(författare)
-
Unusual extraction and characterization of nanocrystalline cellulose from cellulose derivatives
- 2015
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 210, s. 106-112
-
Tidskriftsartikel (refereegranskat)abstract
- Unlike many nanomaterials, nanocrystalline cellulose (CNC) is not synthesized from molecular or atomic components but rather extracted from naturally occurring cellulose. Undoubtedly, the exploitation of CNCs will become a bridge between nanoscience and natural resource products, which could play a major role in reviving the forest industry. In this work, CNC was successfully extracted from unusual sources, hydroxypropyl methylcellulose (HPMC) and carboxymethylcellulose (CMC). The extracted crystallites were purified and further characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and dynamic light scattering (DLS). The average size of the CNCs extracted from HPMC and CMC was found to be less (and with lower zeta potential) than the ones extracted from microcrystalline cellulose (MCC). On the other hand, FTIR and XRD revealed that native HPMC and CMC are unexpectedly highly crystalline and hence can be used as a source for CNCs. © 2014 Elsevier B.V.All rights reserved.
|
|
| 5. |
- Fernandes, C., et al.
(författare)
-
New deep eutectic solvent assisted extraction of highly pure lignin from maritime pine sawdust (Pinus pinaster Ait.)
- 2021
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 177, s. 294-305
-
Tidskriftsartikel (refereegranskat)abstract
- Lignocellulosic biomass is a renewable and sustainable feedstock, mainly composed of cellulose, hemicellulose, and lignin. Lignin, as the most abundant natural aromatic polymer occurring on Earth, has great potential to produce value-added products. However, the isolation of highly pure lignin from biomass requires the use of efficient methods during lignocellulose fractionation. Therefore, in this work, novel acidic deep eutectic solvents (DESs) were prepared, characterized and screened for lignin extraction from maritime pine wood (Pinus pinaster Ait.) sawdust. The use of cosolvents and the development of new DES were also evaluated regarding their extraction and selectivity performance. The results show that an 1 h extraction process at 175 °C, using a novel DES composed of lactic acid, tartaric acid and choline chloride, named Lact:Tart:ChCl, in a molar ratio of 4:1:1, allows the recovery of 95 wt% of the total lignin present in pine biomass with a purity of 89 wt%. Such superior extraction of lignin with remarkable purity using a “green” solvent system makes this process highly appealing for future large-scale applications.
|
|
| 6. |
- Magalhaes, Solange, et al.
(författare)
-
Acacia Wood Fractionation Using Deep Eutectic Solvents : Extraction, Recovery, and Characterization of the Different Fractions
- 2022
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 7:30, s. 26005-26014
-
Tidskriftsartikel (refereegranskat)abstract
- The selective extraction and recovery of different lignocellulosic molecules of interest from forestry residues is increasing every day not only to satisfy the needs of driving a society toward more sustainable approaches and materials (rethinking waste as a valuable resource) but also because lignocellulosic molecules have several applications. For this purpose, the development of new sustainable and ecologically benign extraction approaches has grown significantly. Deep eutectic solvents (DESs) appear as a promising alternative for the processing and manipulation of biomass. In the present study, a DES formed using choline chloride and levulinic acid (ChCl:LA) was studied to fractionate lignocellulosic residues of acacia wood (Acacia dealbata Link), an invasive species in Portugal. Different parameters, such as temperature and extraction time, were optimized to enhance the yield and purity of recovered cellulose and lignin fractions. DESs containing LA were found to be promising solvent systems, as the hydrogen bond donor was considered relevant in relation to lignin extraction and cellulose concentration. On the other hand, the increase in temperature and extraction time increases the amount of extracted material from biomass but affects the purity of lignin. The most promising DES system, ChCELA in a ratio of 1:3, was found to not significantly depolymerize the extracted lignin, which presented a similar molecular weight to a la-aft lignin. Additionally, the P-31 NMR results revealed that the extracted lignin has a high content of phenolic OH groups, which favor its reactivity. A mixture of ChCl:LA may be considered a fully renewable solvent, and the formed DES presents good potential to fractionate wood residues.
|
|
| 7. |
- Magalhães, Solange, et al.
(författare)
-
Brief overview on bio-based adhesives and sealants
- 2019
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 11:10
-
Tidskriftsartikel (refereegranskat)abstract
- Adhesives and sealants (AS) are materials with excellent properties, versatility, and simple curing mechanisms, being widely used in different areas ranging from the construction to the medical sectors. Due to the fast-growing demand for petroleum-based products and the consequent negative environmental impact, there is an increasing need to develop novel and more sustainable sources to obtain raw materials (monomers). This reality is particularly relevant for AS industries, which are generally dependent on non-sustainable fossil raw materials. In this respect, biopolymers, such as cellulose, starch, lignin, or proteins, emerge as important alternatives. Nevertheless, substantial improvements and developments are still required in order to simplify the synthetic routes, as well as to improve the biopolymer stability and performance of these new bio-based AS formulations. This environmentally friendly strategy will hopefully lead to the future partial or even total replacement of non-renewable petroleum-based feedstock. In this brief overview, the general features of typical AS are reviewed and critically discussed regarding their drawbacks and advantages. Moreover, the challenges faced by novel and more ecological alternatives, in particular lignocellulose-based solutions, are highlighted.
|
|
| 8. |
- Magalhães, S., et al.
(författare)
-
Eco-Friendly Methods for Extraction and Modification of Cellulose : An Overview
- 2023
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 15:14
-
Forskningsöversikt (refereegranskat)abstract
- Cellulose is the most abundant renewable polymer on Earth and can be obtained from several different sources, such as trees, grass, or biomass residues. However, one of the issues is that not all the fractionation processes are eco-friendly and are essentially based on cooking the lignocellulose feedstock in a harsh chemical mixture, such as NaOH + Na2S, and water, to break loose fibers. In the last few years, new sustainable fractionation processes have been developed that enable the obtaining of cellulose fibers in a more eco-friendly way. As a raw material, cellulose’s use is widely known and established in many areas. Additionally, its products/derivatives are recognized to have a far better environmental impact than fossil-based materials. Examples are textiles and packaging, where forest-based fibers may contribute to renewable and biodegradable substitutes for common synthetic materials and plastics. In this review, some of the main structural characteristics and properties of cellulose, recent green extraction methods/strategies, chemical modification, and applications of cellulose derivatives are discussed.
|
|
| 9. |
- Ribau Teixeira, M., et al.
(författare)
-
Nanofibrillated cationic cellulose derivatives as flocculants for domestic wastewater treatment
- 2024
-
Ingår i: Journal of Water Process Engineering. - : Elsevier BV. - 2214-7144. ; 58
-
Tidskriftsartikel (refereegranskat)abstract
- Natural-based coagulants have emerged as a reliable option to implement more sustainable operations and management of wastewater treatment plants. This work aims at evaluating the use of cationic nanofibrillated celluloses (cNFC) as novel bio-based flocculants to treat domestic wastewaters by the most widely employed treatment process – coagulation/flocculation. Two cNFC samples were prepared with different charge densities and tested as coagulant/flocculants using different water characteristics. The effect of cNFCs was studied by measuring the residual turbidity and dissolved organic carbon. The aggregation mechanism and kinetics of flocculation were also evaluated. Results show that cNFC can be used as an efficient flocculant to treat medium and high DOC waters since they considerably reduce turbidity (turbidity removals varied between 66.0 % and 85.7 % for the waters and cNFCs tested) without increasing dissolved organic carbon. Instead, cNFC removed dissolved organic carbon from domestic wastewaters (between 22.1 % and 65.5 % of DOC removals for the waters and cNFCs tested), which is a novel remarkable finding and a step forward in this knowledge area. High density charged cNFC revealed superior removal capacity at lower doses than the commercial coagulant FeCl3.
|
|
| 10. |
- van der Valk, Ralf J P, et al.
(författare)
-
A novel common variant in DCST2 is associated with length in early life and height in adulthood.
- 2015
-
Ingår i: Human molecular genetics. - : Oxford University Press (OUP). - 1460-2083 .- 0964-6906. ; 24:4, s. 1155-68
-
Tidskriftsartikel (refereegranskat)abstract
- Common genetic variants have been identified for adult height, but not much is known about the genetics of skeletal growth in early life. To identify common genetic variants that influence fetal skeletal growth, we meta-analyzed 22 genome-wide association studies (Stage 1; N = 28 459). We identified seven independent top single nucleotide polymorphisms (SNPs) (P < 1 × 10(-6)) for birth length, of which three were novel and four were in or near loci known to be associated with adult height (LCORL, PTCH1, GPR126 and HMGA2). The three novel SNPs were followed-up in nine replication studies (Stage 2; N = 11 995), with rs905938 in DC-STAMP domain containing 2 (DCST2) genome-wide significantly associated with birth length in a joint analysis (Stages 1 + 2; β = 0.046, SE = 0.008, P = 2.46 × 10(-8), explained variance = 0.05%). Rs905938 was also associated with infant length (N = 28 228; P = 5.54 × 10(-4)) and adult height (N = 127 513; P = 1.45 × 10(-5)). DCST2 is a DC-STAMP-like protein family member and DC-STAMP is an osteoclast cell-fusion regulator. Polygenic scores based on 180 SNPs previously associated with human adult stature explained 0.13% of variance in birth length. The same SNPs explained 2.95% of the variance of infant length. Of the 180 known adult height loci, 11 were genome-wide significantly associated with infant length (SF3B4, LCORL, SPAG17, C6orf173, PTCH1, GDF5, ZNFX1, HHIP, ACAN, HLA locus and HMGA2). This study highlights that common variation in DCST2 influences variation in early growth and adult height.
|
|
