| 1. |
- Duncanson, Laura, et al.
(author)
-
Aboveground biomass density models for NASA's Global Ecosystem Dynamics Investigation (GEDI) lidar mission
- 2022
-
In: Remote Sensing of Environment. - : Elsevier BV. - 0034-4257 .- 1879-0704. ; 270
-
Journal article (peer-reviewed)abstract
- NASA's Global Ecosystem Dynamics Investigation (GEDI) is collecting spaceborne full waveform lidar data with a primary science goal of producing accurate estimates of forest aboveground biomass density (AGBD). This paper presents the development of the models used to create GEDI's footprint-level (~25 m) AGBD (GEDI04_A) product, including a description of the datasets used and the procedure for final model selection. The data used to fit our models are from a compilation of globally distributed spatially and temporally coincident field and airborne lidar datasets, whereby we simulated GEDI-like waveforms from airborne lidar to build a calibration database. We used this database to expand the geographic extent of past waveform lidar studies, and divided the globe into four broad strata by Plant Functional Type (PFT) and six geographic regions. GEDI's waveform-to-biomass models take the form of parametric Ordinary Least Squares (OLS) models with simulated Relative Height (RH) metrics as predictor variables. From an exhaustive set of candidate models, we selected the best input predictor variables, and data transformations for each geographic stratum in the GEDI domain to produce a set of comprehensive predictive footprint-level models. We found that model selection frequently favored combinations of RH metrics at the 98th, 90th, 50th, and 10th height above ground-level percentiles (RH98, RH90, RH50, and RH10, respectively), but that inclusion of lower RH metrics (e.g. RH10) did not markedly improve model performance. Second, forced inclusion of RH98 in all models was important and did not degrade model performance, and the best performing models were parsimonious, typically having only 1-3 predictors. Third, stratification by geographic domain (PFT, geographic region) improved model performance in comparison to global models without stratification. Fourth, for the vast majority of strata, the best performing models were fit using square root transformation of field AGBD and/or height metrics. There was considerable variability in model performance across geographic strata, and areas with sparse training data and/or high AGBD values had the poorest performance. These models are used to produce global predictions of AGBD, but will be improved in the future as more and better training data become available.
|
|
| 2. |
- Trubetskaya, Anna, 1984-, et al.
(author)
-
Characterization of free radicals by electron spin resonance spectroscopy in biochars from pyrolysis at high heating rates and at high temperatures
- 2016
-
In: Biomass and Bioenergy. - : Elsevier BV. - 0961-9534 .- 1873-2909. ; 94, s. 117-129
-
Journal article (peer-reviewed)abstract
- The concentration and type of free radicals from the decay (termination stage) of pyrolysis at slow and fast heating rates and at high temperatures (above 1000 degrees C) in biomass char have been studied. A room temperature electron spin resonance spectroscopy study was conducted on original wood, herbaceous biomass, holocelluloses, lignin and their chars, prepared at high temperatures in a wire mesh reactor, an entrained flow reactor, and a tubular reactor. The radical concentrations in the chars from the decay stage range up between 7.10(16) and 1.5.10(18) spins g(-1). The results indicated that the biomass major constituents (cellulose, hemicellulose, lignin) had a minor effect on remaining radical concentrations compared to potassium and silica contents. The higher radical concentrations in the wheat straw chars from the decay stage of pyrolysis in the entrained flow reactor compared to the wood chars were related to the decreased mobility of potassium in the char matrix, leading to the less efficient catalytic effects of potassium on the bond-breaking and radical re-attachments. The high Si levels in the rice husk caused an increase in the char radical concentration compared to the wheat straw because the free radicals were trapped in a char consisting of a molten amorphous silica at heating rates of 10(3)-10(4) K s(-1). The experimental electron spin resonance spectroscopy spectra were analyzed by fitting to simulated data in order to identify radical types, based on g-values and line widths. The results show that at high temperatures, mostly aliphatic radicals (g = 2.0026-2.0028) and PAH radicals (g = 2.0027-2.0031) were formed.
|
|
| 3. |
|
|
| 4. |
- Persson, Peter, et al.
(author)
-
Effect of structural design on traffic-induced building vibrations
- 2017
-
In: Procedia Engineering. - : Elsevier BV. - 1877-7058. ; 199, s. 2711-2716
-
Journal article (peer-reviewed)abstract
- Population growth and urbanization results in densified cities, where new buildings are being built closer to existing vibration sources, and new transportation systems are constructed closer to existing buildings. Potential disturbing vibrations are one issue to consider in planning urban environments and densification of cities. Vibrations can be annoying for humans but also for sensitive equipment in, for example, hospitals. In determining the risk for disturbing vibrations, the distance between the source and the receiver, the ground properties, and type and size of the building are governing factors. In the paper, a study is presented aiming at investigating the influence of various parameters of the building’s structural design on vibration levels in the structure caused by ground surface loads, e.g. traffic. Parameters studied are related to the type of construction material (if it would be a light or heavy structure), and to the slab thickness. The study is limited to the structural response at frequencies near the first resonance frequency of the soil. The finite element method is employed for discretizing the building structure that is coupled to a semi-analytical model considering a layered ground.
|
|
| 5. |
- Andersen, Lars Vabbersgaard, et al.
(author)
-
Variation in models for simple dynamic structure–soil–structure interaction problems
- 2017
-
In: Procedia Engineering. - : Elsevier BV. - 1877-7058. ; 199, s. 2306-2311
-
Conference paper (peer-reviewed)abstract
- To account for dynamic cross-coupling of structures via the soil, a computational model must be accurate enough to provide the correct overall behaviour of the scattered wave field. However, simplicity is also important when a model should be used for design purposes, especially in the early design stages and feasibility studies. The paper addresses the accuracy of simple models in which an array of structures is simplified into blocks placed on the ground surface or embedded within the soil. Comparisons are made between models that account or do not account, in a proper manner, for the inertia and embedment of the structures. Especially, the limitations of simplified models are discussed regarding their capability to quantify the insertion loss accurately.
|
|
| 6. |
- Frier, Cristian, et al.
(author)
-
Flooring-systems and their interaction with furniture and humans
- 2017
-
In: Procedia Engineering. - : Elsevier BV. - 1877-7058. ; 199, s. 146-151
-
Journal article (peer-reviewed)abstract
- Flooring-system designs may be sensitive in terms of their vibrational performance due the risk that serviceability-limit-state problems may be encountered. For evaluating the vibrational performance of a flooring system at the design stage, decisions must be made by the engineer in charge of computations. Passive humans and/or furniture are often present on a floor. Typically, these masses and their way of interacting with the floor mass are ignored in predictions of vibrational behaviour of the flooring system. Utilizing a shell finite-element model, the paper explores and quantifies how non-structural mass can influence central parameters describing the dynamic behaviour of the flooring system with focus on elevated non-structural mass.
|
|
| 7. |
- Landin, Per Niklas, et al.
(author)
-
Wideband Characterization of Power Amplifiers Using Undersampling
- 2009
-
In: 2009 IEEE MTT-S International Microwave Symposium Digest. - Boston : IEEE MTT. - 9781424428038 ; , s. 1365-1368
-
Conference paper (peer-reviewed)abstract
- In this paper a radio frequency power amplifier is measured and characterized by the use of undersampling based on the generalized Zhu-Frank sampling theorem. A test system has been designed allowing the bandwidth of the stimuli signal to be 100 MHz in the characterization process. That would not be possible with any vector signal analyzer on the market. One of the more challenging problem within the proposed concept is the model validation process. Here, two different techniques for model validation are proposed, the multitone and the spectrum scan validation methods.
|
|
| 8. |
- Andersen, Casper Welzel, et al.
(author)
-
Redox-Driven Migration of Copper Ions in the Cu-CHA Zeolite as Shown by the InSitu PXRD/XANES Technique
- 2017
-
In: Angewandte Chemie - International Edition. - : Wiley. - 1433-7851. ; 56:35, s. 10367-10372
-
Journal article (peer-reviewed)abstract
- Using quasi-simultaneous insitu PXRD and XANES, the direct correlation between the oxidation state of Cu ions in the commercially relevant deNOx NH3-SCR zeolite catalyst Cu-CHA and the Cu ion migration in the zeolitic pores was revealed during catalytic activation experiments. A comparison with recent reports further reveals the high sensitivity of the redox-active centers concerning heating rates, temperature, and gas environment during catalytic activation. Previously, Cu+ was confirmed present only in the 6R. Results verify a novel 8R monovalent Cu site, an eventually large Cu+ presence upon heating to high temperatures in oxidative conditions, and demonstrate the unique potential in combining insitu PXRD and XANES techniques, with which both oxidation state and structural location of the redox-active centers in the zeolite framework could be tracked.
|
|
| 9. |
|
|
| 10. |
- Gjerde, Kjetil, et al.
(author)
-
On the suitability of carbon nanotube forests as non-stick surfaces for nanomanipulation
- 2008
-
In: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-6848 .- 1744-683X. ; 4:3, s. 392-399
-
Journal article (peer-reviewed)abstract
- A carbon nanotube forest provides a unique non-stick surface for nanomanipulation, as the nanostructuring of the surface allows micro- and nanoscale objects to be easily removed after first being deposited via a liquid dispersion. A common problem for smooth surfaces is the strong initial stiction caused by adhesion forces after deposition onto the surface. In this work, carbon nanotube forests fabricated by plasma-enhanced chemical vapour deposition are compared to structures with a similar morphology, silicon nanograss, defined by anisotropic reactive ion-etching. While manipulation experiments with latex microbeads on structured as well as smooth surfaces ( gold, silicon, silicon dioxide, Teflon, diamond-like carbon) showed a very low initial stiction for both carbon nanotube forests and silicon nanograss, a homogeneous distribution of particles was significantly easier to achieve on the carbon nanotube forests. Contact-angle measurements during gradual evaporation revealed that the silicon nanograss was superhydrophic with no contact-line pinning, while carbon nanotube forests in contrast showed strong contact-line pinning, as confirmed by environmental scanning electron microscopy of microdroplets. As a consequence, latex microbeads dispersed on the surface from an aqueous solution distributed evenly on carbon nanotube forests, but formed large agglomerates after evaporation on silicon nanograss. Lateral manipulation of latex microbeads with a microcantilever was found to be easier on carbon nanotube forests and silicon nanograss compared to smooth diamond-like carbon, due to a substantially lower initial stiction force on surfaces with nanoscale roughness. Nanomanipulation of bismuth nanowires, carbon nanotubes and organic nanofibres was demonstrated on carbon nanotube forests using a sharp tungsten tip. We find that the reason for the remarkable suitability of carbon nanotube forests as a non-stick surface for nanomanipulation is indeed the strong contact-line pinning in combination with the nanostructured surface, which allows homogeneous dispersion and easy manipulation of individual particles.
|
|
