| 1. |
- Jiang, Zheshun, et al.
(författare)
-
Hexavalent chromium still a concern in Sweden : Evidence from a cross-sectional study within the SafeChrom project
- 2024
-
Ingår i: International journal of hygiene and environmental health. - : Elsevier. - 1438-4639 .- 1618-131X. ; 256
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectivesHexavalent chromium (Cr(VI)) is classified as a human carcinogen. Occupational Cr(VI) exposure can occur during different work processes, but the current exposure to Cr(VI) at Swedish workplaces is unknown.MethodsThis cross-sectional study (SafeChrom) recruited non-smoking men and women from 14 companies with potential Cr(VI) exposure (n = 113) and controls from 6 companies without Cr(VI) exposure (n = 72). Inhalable Cr(VI) was measured by personal air sampling (outside of respiratory protection) in exposed workers. Total Cr was measured in urine (pre- and post-shift, density-adjusted) and red blood cells (RBC) (reflecting Cr(VI)) in exposed workers and controls. The Bayesian tool Expostats was used to assess risk and evaluate occupational exposure limit (OEL) compliance.ResultsThe exposed workers performed processing of metal products, steel production, welding, plating, and various chemical processes. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 μg/m3 (95% confidence interval: 0.11–0.21). Eight of the 113 exposed workers (7%) exceeded the Swedish OEL of 5 μg/m3, and the Bayesian analysis estimated the share of OEL exceedances up to 19.6% for stainless steel welders. Median post-shift urinary (0.60 μg/L, 5th-95th percentile 0.10–3.20) and RBC concentrations (0.73 μg/L, 0.51–2.33) of Cr were significantly higher in the exposed group compared with the controls (urinary 0.10 μg/L, 0.06–0.56 and RBC 0.53 μg/L, 0.42–0.72). Inhalable Cr(VI) correlated with urinary Cr (rS = 0.64) and RBC-Cr (rS = 0.53). Workers within steel production showed the highest concentrations of inhalable, urinary and RBC Cr. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urinary and RBC Cr concentrations compared with those with inferred acceptable ventilation. Furthermore, workers with inferred correct use of respiratory protection were exposed to significantly higher concentrations of Cr(VI) in air and had higher levels of Cr in urine and RBC than those assessed with incorrect or no use. Based on the Swedish job-exposure-matrix, approximately 17 900 workers were estimated to be occupationally exposed to Cr(VI) today.ConclusionsOur study demonstrates that some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). Employers and workers seem aware of Cr(VI) exposure, but more efficient exposure control strategies are required. National strategies aligned with the European strategies are needed in order to eliminate this cause of occupational cancer.
|
|
| 2. |
- Jiang, Zheshun, et al.
(författare)
-
P-205 THE SAFECHROM PROJECT - EVIDENCE FROM A CROSS-SECTIONAL STUDY SHOWS THAT HEXAVALENT CHROMIUM IS STILL A CONCERN IN SWEDEN
- 2024
-
Ingår i: Occupational Medicine. - 0962-7480. ; 74:Suppl 1, s. 291-292
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Hexavalent chromium Cr(VI) is a human carcinogen, but the current exposure to Cr(VI) at Swedish workplaces is unknown.Recruitment of 113 workers with potential Cr(VI) exposure and 72 controls was combined with measurements of inhalable Cr(VI) (only exposed workers) and total Cr in urine and red blood cells (RBC), Bayesian analysis of occupational exposure limit (OEL) compliance was used, as well as the Swedish job-exposure-matrix.Exposed workers performed processing of metal products, steel production, welding, and plating. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 μg/m3. Eight workers (7\ exceeded the Swedish OEL (5 μg/m3), and the share of OEL exceedances was estimated to be up to 19.6\ and RBC-Cr were significantly higher in exposed workers compared with controls. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urine- and RBC-Cr than those with acceptable ventilation. Workers with inferred correct use of respiratory protection had higher inhalable Cr(VI), and, paradoxically, higher urine- and RBC-Cr concentrations than workers with incorrect use. We estimate that ~17 900 Swedish workers are occupationally exposed to Cr(VI) today.Our study showed that although most air measurements were relatively low, 7\ and particularly stainless steel workers are at risk for exceeding the OEL. The existing protective measures implemented at workplaces are still inadequate and insufficient.Some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). National strategies aligned with European strategies are needed to eliminate occupational cancer.
|
|
| 3. |
- Taj, Tahir, et al.
(författare)
-
Effect of welding fumes on the cardiovascular system: a six-year longitudinal study
- 2021
-
Ingår i: Scandinavian Journal of Work Environment & Health. - : Scandinavian Journal of Work, Environment and Health. - 0355-3140 .- 1795-990X. ; 47:1, s. 52-61
-
Tidskriftsartikel (refereegranskat)abstract
- Objective This study investigated whether low-to-moderate exposure to welding fumes is associated with adverse effects on the cardiovascular system. Methods To test this, we performed a longitudinal analysis of 78 mild steel welders and 96 controls; these subjects were examined twice, six years apart (ie, timepoints 1 and 2). All subjects (male and non-smoking at recruitment) completed questionnaires describing their health, work history, and lifestyle. We measured their blood pressure, endothelial function (by EndoPAT), and risk markers for cardiovascular disease [low-density lio-protein (LDL), homocysteine, C-reactive protein]. Exposure to welding fumes was assessed from the responses to questionnaires and measurements of respirable dust in their breathing zones adjusted for use of respiratory protection equipment. Linear mixed-effect regression models were used for the longitudinal analysis. Results Median respirable dust concentrations, adjusted for respirable protection, of the welders were 0.7 (5-95 percentile range 0.2-4.2) and 0.5 (0.1-1.9) mg/m 3 at timepoints 1 and 2, respectively. Over the six-year period, welders showed a statistically significant increase in systolic [5.11 mm Hg, 95% confidence interval (CI) 1.92-8.31] and diastolic (3.12 mm Hg, 95% CI 0.74-5.5) blood pressure compared with controls (multi-variable adjusted mixed effect models). Diastolic blood pressure increased non-significantly by 0.22 mm Hg (95% CI-0.02-0.45) with every additional year of welding work. No consistent significant associations were found between exposure and endothelial function, LDL, homocysteine, or C-reactive protein. Conclusion Exposure to welding fumes at low-to-moderate levels is associated with increased blood pressure, suggesting that reducing the occupational exposure limit (2.5 mg/m(3) for inorganic respirable dust in Sweden) is needed to protect cardiovascular health of workers.
|
|
| 4. |
- Gliga, Anda R., et al.
(författare)
-
Mild steel welding is associated with alterations in circulating levels of cancer-related proteins
- 2019
-
Ingår i: Archives of Toxicology. - : Springer Science and Business Media LLC. - 0340-5761 .- 1432-0738. ; 93:12, s. 3535-3547
-
Tidskriftsartikel (refereegranskat)abstract
- Welding fumes were recently classified as carcinogenic to humans and worldwide millions work as welders or perform welding operations. The purpose of this study was to identify new biomarkers of welding-induced carcinogenesis. We evaluated a panel of 91 putative cancer-related proteins in serum in a cohort of welders working with mild steel (n = 77) and controls (n = 94) from southern Sweden sampled on two occasions 6-year apart using a longitudinal analysis (linear mixed models). The significant results from the longitudinal analysis were tested for reproducibility in welders (n = 88) and controls (n = 69) sampled once during the same sampling period as timepoint 1 or timepoint 2 (linear regression models), i.e., in a cross-sectional setting. The models were adjusted for age, body-mass index, and use of snus. All study participants were non-smokers at recruitment. Exposure to welding fumes was assessed using questionnaires and respirable dust measurement in the breathing zone that was adjusted for personal respiratory protection equipment. The median respirable dust in welders was 0.7 (0.2–4.2) and 0.5 (0.1–1.9) mg/m3 at the first and second timepoints, respectively. We identified 14 cancer-related proteins that were differentially expressed in welders versus controls in the longitudinal analysis, out of which three were also differentially expressed in the cross-sectional analysis (cross-sectional group). Namely, syndecan 1 (SDC1), folate receptor 1 (FOLR1), and secreted protein acidic and cysteine rich (SPARC) were downregulated, in welders compared with controls. In addition, FOLR1 was negatively associated with years welding. Disease and function analysis indicated that the top proteins are related to lung cancer as well as cell invasion and migration. Our study indicates that moderate exposure to welding fumes is associated with changes in circulating levels of putative cancer-related proteins, out of which FOLR1 showed a clear dose–response relationship. It is, however, unclear to which extent these changes are adaptive or potential early biomarkers of cancer.
|
|
| 5. |
- Gren, Louise, et al.
(författare)
-
Lung function and self-rated symptoms in healthy volunteers after exposure to hydrotreated vegetable oil (HVO) exhaust with and without particles
- 2022
-
Ingår i: Particle and Fibre Toxicology. - : Springer Science and Business Media LLC. - 1743-8977. ; 19:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Diesel engine exhaust causes adverse health effects. Meanwhile, the impact of renewable diesel exhaust, such as hydrotreated vegetable oil (HVO), on human health is less known. Nineteen healthy volunteers were exposed to HVO exhaust for 3 h in a chamber with a double-blind, randomized setup. Exposure scenarios comprised of HVO exhaust from two modern non-road vehicles with 1) no aftertreatment system ('HVOPM+NOx' PM1: 93 mu g-m(-3), EC: 54 mu g-m(-3), NO: 3.4 ppm, -NO2: 0.6 ppm), 2) an aftertreatment system containing a diesel oxidation catalyst and a diesel particulate filter ('HVONOx' PM1: similar to 1 mu g-m(-3), NO: 2.0 ppm, -NO2: 0.7 ppm) and 3) filtered air (FA) as control. The exposure concentrations were in line with current EU occupational exposure limits (OELs) of NO, -NO2, formaldehyde, polycyclic aromatic hydrocarbons (PAHs), and the future OEL (2023) of elemental carbon (EC). The effect on nasal patency, pulmonary function, and self-rated symptoms were assessed. Calculated predicted lung deposition of HVO exhaust particles was compared to data from an earlier diesel exhaust study. Results: The average total respiratory tract deposition of PM1 during -HVO(PM+ NO)x was 27 mu g-h(-1). The estimated deposition fraction of HVO PM1 was 40-50% higher compared to diesel exhaust PM1 from an older vehicle (earlier study), due to smaller particle sizes of the -HVOPM+ NOx exhaust. Compared to FA, exposure to -HVOPM+ NOx and -HVONOx caused higher incidence of self-reported symptoms (78%, 63%, respectively, vs. 28% for FA, p < 0.03). Especially, exposure to -HVOPM+ NOx showed 40-50% higher eye and throat irritation symptoms. Compared to FA, a decrement in nasal patency was found for the -HVONOx exposures (- 18.1, 95% CI: - 27.3 to - 8.8 L-min(-1), p < 0.001), and for the -HVOPM+ NOx (- 7.4 (- 15.6 to 0.8) L -min(-1), p = 0.08). Overall, no clinically significant change was indicated in the pulmonary function tests (spirometry, peak expiratory flow, forced oscillation technique). Conclusion: Short-term exposure to HVO exhaust concentrations corresponding to EU OELs for one workday did not cause adverse pulmonary function changes in healthy subjects. However, an increase in self-rated mild irritation symptoms, and mild decrease in nasal patency after both HVO exposures, may indicate irritative effects from exposure to HVO exhaust from modern non-road vehicles, with and without aftertreatment systems.
|
|
| 6. |
- Julander, Anneli, et al.
(författare)
-
Nickel penetration into stratum corneum in FLG null carriers—A human experimental study
- 2022
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 87:2, s. 154-161
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The filaggrin gene (FLG) plays a role in skin diseases, with the skin barrier function being impaired in FLG null carriers. The role of FLG status in relation to nickel penetration into the skin remains unclear. Objectives: To elucidate the association between FLG status and nickel penetration into stratum corneum (SC) in individuals without self-reported history of nickel allergy. Methods: Forty participants (23 FLG wt and 17 FLG null) were exposed to a nickel solution (80 μg/cm2) which was applied onto 2 × 2 cm on their left forearm. After 4 h, the area was tape-stripped with 10 consecutive tapes. Nickel in each tape was quantified using inductively coupled plasma mass spectrometry. Results: The average recovered nickel dose was 35%–48%. A tendency towards lower recovery was seen in FLG null carriers compared to FLG wt carriers, and lower recovery in those with history of skin and/or respiratory symptoms compared to those without such history. This was however not statistically significant. Conclusion: FLG null carriers had less nickel recovered by tape strips compared with FLG wt carriers and, compared with individuals without a history of skin and/or respiratory symptoms, indicating higher nickel penetration into SC for FLG null carriers, but further studies are needed.
|
|
| 7. |
- Lovén, Karin, et al.
(författare)
-
Effects of cleaning spray use on eyes, airways, and ergonomic load
- 2023
-
Ingår i: BMC Public Health. - : Springer Science and Business Media LLC. - 1471-2458. ; 23:1
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundCleaning workers are exposed to chemicals and high physical workload, commonly resulting in airway problems and pain. In this study the response in the upper airways and the physical workload following airborne and ergonomic exposure of cleaning spray was investigated.MethodsA survey was answered by professional cleaning workers to investigate their use of cleaning sprays and the perceived effects on eyes, airways and musculoskeletal pain. A human chamber exposure study was then conducted with 11 professional cleaning workers and 8 non-professional cleaning workers to investigate the airborne exposure, acute effects on eyes and airways, and physical load during cleaning with sprays, foam application and microfiber cloths premoistened with water. All cleaning products used were bleach, chlorine, and ammonia free. The medical assessment included eye and airway parameters, inflammatory markers in blood and nasal lavage, as well as technical recordings of the physical workload.ResultsA high frequency of spray use (77%) was found among the 225 professional cleaning workers that answered the survey. Based on the survey, there was an eight times higher risk (p < 0.001) of self-experienced symptoms (including symptoms in the nose, eyes and throat, coughing or difficulty breathing) when they used sprays compared to when they cleaned with other methods. During the chamber study, when switching from spray to foam, the airborne particle and volatile organic compound (VOC) concentrations showed a decrease by 7 and 2.5 times, respectively. For the whole group, the peak nasal inspiratory flow decreased (-10.9 L/min, p = 0.01) during spray use compared to using only water-premoistened microfiber cloths. These effects were lower during foam use (-4.7 L/min, p = 0.19). The technical recordings showed a high physical workload regardless of cleaning with spray or with water.ConclusionSwitching from a spraying to a foaming nozzle decreases the exposure of both airborne particles and VOCs, and thereby reduces eye and airway effects, and does not increase the ergonomic load. If the use of cleaning products tested in this study, i.e. bleach, chlorine, and ammonia free, cannot be avoided, foam application is preferable to spray application to improve the occupational environment.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
