| 1. |
- Coda, S., et al.
(författare)
-
Physics research on the TCV tokamak facility: From conventional to alternative scenarios and beyond
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Tidskriftsartikel (refereegranskat)abstract
- The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device's unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power 'starvation' reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in-out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added.
|
|
| 2. |
- Reimerdes, H., et al.
(författare)
-
Overview of the TCV tokamak experimental programme
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with 'small' (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations.
|
|
| 3. |
- Baquero Barneto, Carlos, et al.
(författare)
-
Millimeter-wave Mobile Sensing and Environment Mapping: Models, Algorithms and Validation
- 2022
-
Ingår i: IEEE Transactions on Vehicular Technology. - 0018-9545 .- 1939-9359. ; 71:4, s. 3900-3916
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment mapping prospect with specific emphasis on the user equipment (UE) side. We first describe an efficient $\ell_1$-regularized least-squares (LS) approach to obtain sparse range--angle charts at individual measurement or sensing locations. For the subsequent environment mapping, we then introduce a novel state model for mapping diffuse and specular scattering, which allows efficient tracking of individual scatterers over time using interacting multiple model (IMM) extended Kalman filter and smoother. Also the related measurement selection and data association problems are addressed. We provide extensive numerical indoor mapping results at the 28~GHz band deploying OFDM-based 5G NR uplink waveform with 400~MHz channel bandwidth, covering both accurate ray-tracing based as well as actual RF measurement results. The results illustrate the superiority of the dynamic tracking-based solutions, compared to static reference methods, while overall demonstrate the excellent prospects of radio-based mobile environment sensing and mapping in future mm-wave networks.
|
|
| 4. |
- Algaba Brazalez, Astrid, 1983, et al.
(författare)
-
Design of F-Band Transition From Microstrip to Ridge Gap Waveguide Including Monte Carlo Assembly Tolerance Analysis
- 2016
-
Ingår i: IEEE Transactions on Microwave Theory and Techniques. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9480 .- 1557-9670. ; 64:4, s. 1245-1254
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the design and realization of a transition from a microstrip line to a ridge gap waveguide operating between 95 and 115 GHz. The study includes simulations, measurements, and a Monte Carlo analysis of the assembly tolerances. The purpose of this tolerance study is to identify the most critical misalignments that affect the circuit performance and to provide guidelines about the assembly tolerance requirements for the proposed transition design.
|
|
| 5. |
- Talvitie, Jukka, et al.
(författare)
-
Indoor Mapping with a Mobile Radar Using an EK-PHD Filter
- 2021
-
Ingår i: IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC. ; 2021-September
-
Konferensbidrag (refereegranskat)abstract
- Integrated communications, localization and sensing is one of the most addressed technologies considered for future mobile communications systems. In this context, a user equipment (UE)-centric mobile radar has been proposed to introduce improved situational awareness, and consequently potential improvement in network performance. In this paper, we derive an extended Kalman probability hypothesis density (EK-PHD) filter with a novel feature model, for a mobile radar based environment mapping, where range-angle detections are used to track map objects over time for dynamic map construction. In order to evaluate the performance of the proposed filtering approach, we employ a realistic ray-tracing-based simulation setup, which models the full transmission chain from the transmitted IQ-samples to mapping results. Besides this, a simplified measurement model considering solely single-bounce specular reflections is exploited for providing further insight into the filter performance. The obtained results show that the proposed EK-PHD filter is able to provide high-quality mapping results, reaching around 10 cm landmark estimation accuracy in the considered millimeter wave simulation setup.
|
|
