| 1. |
- Glasbey, JC, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 2. |
|
|
| 3. |
- Arain, Muhammad Asif, 1983-, et al.
(författare)
-
Efficient Measurement Planning for Remote Gas Sensing with Mobile Robots
- 2015
-
Ingår i: 2015 IEEE International Conference on Robotics and Automation (ICRA). - Washington, USA : IEEE. - 9781479969234 ; , s. 3428-3434
-
Konferensbidrag (refereegranskat)abstract
- The problem of gas detection is relevant to manyreal-world applications, such as leak detection in industrialsettings and surveillance. In this paper we address the problemof gas detection in large areas with a mobile robotic platformequipped with a remote gas sensor. We propose a novelmethod based on convex relaxation for quickly finding anexploration plan that guarantees a complete coverage of theenvironment. Our method proves to be highly efficient in termsof computational requirements and to provide nearly-optimalsolutions. We validate our approach both in simulation andin real environments, thus demonstrating its applicability toreal-world problems.
|
|
| 4. |
- Arain, Muhammad Asif, 1983-, et al.
(författare)
-
Improving Gas Tomography With Mobile Robots : An Evaluation of Sensing Geometries in Complex Environments
- 2017
-
Ingår i: 2017 ISOCS/IEEE International Symposium on Olfaction andElectronic Nose (ISOEN 2017) Proceedings. - : IEEE. - 9781509023929 - 9781509023936
-
Konferensbidrag (refereegranskat)abstract
- An accurate model of gas emissions is of high importance in several real-world applications related to monitoring and surveillance. Gas tomography is a non-intrusive optical method to estimate the spatial distribution of gas concentrations using remote sensors. The choice of sensing geometry, which is the arrangement of sensing positions to perform gas tomography, directly affects the reconstruction quality of the obtained gas distribution maps. In this paper, we present an investigation of criteria that allow to determine suitable sensing geometries for gas tomography. We consider an actuated remote gas sensor installed on a mobile robot, and evaluated a large number of sensing configurations. Experiments in complex settings were conducted using a state-of-the-art CFD-based filament gas dispersal simulator. Our quantitative comparison yields preferred sensing geometries for sensor planning, which allows to better reconstruct gas distributions.
|
|
| 5. |
- Arain, Muhammad Asif, 1983-, et al.
(författare)
-
The Right Direction to Smell : Efficient Sensor Planning Strategies for Robot Assisted Gas Tomography
- 2016
-
Ingår i: 2016 IEEE International Conference on Robotics and Automation (ICRA). - New York, USA : IEEE Robotics and Automation Society. ; , s. 4275-4281
-
Konferensbidrag (refereegranskat)abstract
- Creating an accurate model of gas emissions is an important task in monitoring and surveillance applications. A promising solution for a range of real-world applications are gas-sensitive mobile robots with spectroscopy-based remote sensors that are used to create a tomographic reconstruction of the gas distribution. The quality of these reconstructions depends crucially on the chosen sensing geometry. In this paper we address the problem of sensor planning by investigating sensing geometries that minimize reconstruction errors, and then formulate an optimization algorithm that chooses sensing configurations accordingly. The algorithm decouples sensor planning for single high concentration regions (hotspots) and subsequently fuses the individual solutions to a global solution consisting of sensing poses and the shortest path between them. The proposed algorithm compares favorably to a template matching technique in a simple simulation and in a real-world experiment. In the latter, we also compare the proposed sensor planning strategy to the sensing strategy of a human expert and find indications that the quality of the reconstructed map is higher with the proposed algorithm.
|
|
| 6. |
- Bennetts, Victor Hernandez, 1980-, et al.
(författare)
-
Robot Assisted Gas Tomography - Localizing Methane Leaks in Outdoor Environments
- 2014
-
Ingår i: 2014 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA). - : IEEE conference proceedings. - 9781479936854 ; , s. 6362-6367
-
Konferensbidrag (refereegranskat)abstract
- In this paper we present an inspection robot to produce gas distribution maps and localize gas sources in large outdoor environments. The robot is equipped with a 3D laser range finder and a remote gas sensor that returns integral concentration measurements. We apply principles of tomography to create a spatial gas distribution model from integral gas concentration measurements. The gas distribution algorithm is framed as a convex optimization problem and it models the mean distribution and the fluctuations of gases. This is important since gas dispersion is not an static phenomenon and furthermore, areas of high fluctuation can be correlated with the location of an emitting source. We use a compact surface representation created from the measurements of the 3D laser range finder with a state of the art mapping algorithm to get a very accurate localization and estimation of the path of the laser beams. In addition, a conic model for the beam of the remote gas sensor is introduced. We observe a substantial improvement in the gas source localization capabilities over previous state-of-the-art in our evaluation carried out in an open field environment.
|
|
| 7. |
- Burgues, Javier, et al.
(författare)
-
Gas Distribution Mapping and Source Localization Using a 3D Grid of Metal Oxide Semiconductor Sensors
- 2020
-
Ingår i: Sensors and actuators. B, Chemical. - : Elsevier. - 0925-4005 .- 1873-3077. ; 304
-
Tidskriftsartikel (refereegranskat)abstract
- The difficulty to obtain ground truth (i.e. empirical evidence) about how a gas disperses in an environment is one of the major hurdles in the field of mobile robotic olfaction (MRO), impairing our ability to develop efficient gas source localization strategies and to validate gas distribution maps produced by autonomous mobile robots. Previous ground truth measurements of gas dispersion have been mostly based on expensive tracer optical methods or 2D chemical sensor grids deployed only at ground level. With the ever-increasing trend towards gas-sensitive aerial robots, 3D measurements of gas dispersion become necessary to characterize the environment these platforms can explore. This paper presents ten different experiments performed with a 3D grid of 27 metal oxide semiconductor (MOX) sensors to visualize the temporal evolution of gas distribution produced by an evaporating ethanol source placed at different locations in an office room, including variations in height, release rate and air flow. We also studied which features of the MOX sensor signals are optimal for predicting the source location, considering different lengths of the measurement window. We found strongly time-varying and counter-intuitive gas distribution patterns that disprove some assumptions commonly held in the MRO field, such as that heavy gases disperse along ground level. Correspondingly, ground-level gas distributions were rarely useful for localizing the gas source and elevated measurements were much more informative. We make the dataset and the code publicly available to enable the community to develop, validate, and compare new approaches related to gas sensing in complex environments.
|
|
| 8. |
- Burgués, Javier, et al.
(författare)
-
Smelling Nano Aerial Vehicle for Gas Source Localization and Mapping
- 2019
-
Ingår i: Sensors. - Basel, Switzerland : MDPI. - 1424-8220. ; 19:3
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the development and validation of the currently smallest aerial platform with olfaction capabilities. The developed Smelling Nano Aerial Vehicle (SNAV) is based on a lightweight commercial nano-quadcopter (27 g) equipped with a custom gas sensing board that can host up to two in situ metal oxide semiconductor (MOX) gas sensors. Due to its small form-factor, the SNAV is not a hazard for humans, enabling its use in public areas or inside buildings. It can autonomously carry out gas sensing missions of hazardous environments inaccessible to terrestrial robots and bigger drones, for example searching for victims and hazardous gas leaks inside pockets that form within the wreckage of collapsed buildings in the aftermath of an earthquake or explosion. The first contribution of this work is assessing the impact of the nano-propellers on the MOX sensor signals at different distances to a gas source. A second contribution is adapting the ‘bout’ detection algorithm, proposed by Schmuker et al. (2016) to extract specific features from the derivative of the MOX sensor response, for real-time operation. The third and main contribution is the experimental validation of the SNAV for gas source localization (GSL) and mapping in a large indoor environment (160 m2) with a gas source placed in challenging positions for the drone, for example hidden in the ceiling of the room or inside a power outlet box. Two GSL strategies are compared, one based on the instantaneous gas sensor response and the other one based on the bout frequency. From the measurements collected (in motion) along a predefined sweeping path we built (in less than 3 min) a 3D map of the gas distribution and identified the most likely source location. Using the bout frequency yielded on average a higher localization accuracy than using the instantaneous gas sensor response (1.38 m versus 2.05 m error), however accurate tuning of an additional parameter (the noise threshold) is required in the former case. The main conclusion of this paper is that a nano-drone has the potential to perform gas sensing tasks in complex environments.
|
|
| 9. |
- Fan, Han, 1989-, et al.
(författare)
-
Improving Gas Dispersal Simulation For Mobile Robot Olfaction : Using Robot-Created Occupancy Maps And Remote Gas Sensors In The Simulation Loop
- 2017
-
Ingår i: 2017 ISOCS/IEEE International Symposium on Olfaction andElectronic Nose (ISOEN 2017) Proceedings. - : IEEE conference proceedings. - 9781509023929 - 9781509023936
-
Konferensbidrag (refereegranskat)abstract
- Mobile robot platforms equipped with olfaction systems have been used in many gas sensing applications. However, in-field validation of mobile robot olfaction systems is time consuming, expensive, cumbersome and lacks repeatability. In order to address these issues, simulation tools are used. However, the available mobile robot olfaction simulations lack models for remote gas sensors, and the possibility to import geometrical representations of actual real-world environments in a convenient way. In this paper, we describe extensions to an open-source CFD-based filament gas dispersal simulator. These improvements arrow to use robot-created occupancy maps and offer remote sensing capabilities in the simulation loop. We demonstrate the novel features in an example application: we created a 3D map a complex indoor environment, and performed a gas emission monitoring task with a Tunable Diode Laser Absorption Spectroscopy based remote gas sensor in a simulated version of the environment.
|
|
| 10. |
- Fan, Han, 1989-, et al.
(författare)
-
Semi-supervised Gas Detection Using an Ensemble of One-class Classifiers
- 2019
-
Ingår i: 18th ISOCS/IEEE International Symposium on Olfaction and Electronic Nose (ISOEN). - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- Detecting chemical compounds using electronic noses is important in many gas sensing related applications. Existing gas detection methods typically use prior knowledge of the target analytes. However, in some scenarios, the analytes to be detected are not fully known in advance, and preparing a dedicated model is not possible. To address this issue, we propose a gas detection approach using an ensemble of one-class classifiers. The proposed approach is initialized by learning a Mahalanobis-based and a Gaussian based model using clean air only. During the sampling process, the presence of chemicals is detected by the initialized system, which allows to learn a one-class nearest neighbourhood model without supervision. From then on the gas detection considers the predictions of the three one-class models. The proposed approach is validated with real-world experiments, in which a mobile robot equipped with an e-nose was remotely controlled to interact with different chemical analytes in an open environment.
|
|
