| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 6. |
- Hoshino, Ayuko, et al.
(författare)
-
Extracellular Vesicle and Particle Biomarkers Define Multiple Human Cancers
- 2020
-
Ingår i: Cell. - : CELL PRESS. - 0092-8674 .- 1097-4172. ; 182:4, s. 1044-
-
Tidskriftsartikel (refereegranskat)abstract
- There is an unmet clinical need for improved tissue and liquid biopsy tools for cancer detection. We investigated the proteomic profile of extracellular vesicles and particles (EVPs) in 426 human samples from tissue explants (TEs), plasma, and other bodily fluids. Among traditional exosome markers, CD9, HSPA8, ALIX, and HSP90AB1 represent pan-EVP markers, while ACTB, MSN, and RAP1B are novel pan-EVP markers. To confirm that EVPs are ideal diagnostic tools, we analyzed proteomes of TE- (n =151) and plasma-derived (n =120) EVPs. Comparison of TE EVPs identified proteins (e.g., VCAN, TNC, and THBS2) that distinguish tumors from normal tissues with 90% sensitivity/94% specificity. Machine-learning classification of plasma-derived EVP cargo, including immunoglobulins, revealed 95% sensitivity/90% specificity in detecting cancer Finally, we defined a panel of tumor-type-specific EVP proteins in TEs and plasma, which can classify tumors of unknown primary origin. Thus, EVP proteins can serve as reliable biomarkers for cancer detection and determining cancer type.
|
|
| 7. |
- Uijterwijk, Bas A., et al.
(författare)
-
The Five Periampullary Cancers, not Just Different Siblings but Different Families: An International Multicenter Cohort Study
- 2024
-
Ingår i: Annals of Surgical Oncology. - : SPRINGER. - 1068-9265 .- 1534-4681.
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Cancer arising in the periampullary region can be anatomically classified in pancreatic ductal adenocarcinoma (PDAC), distal cholangiocarcinoma (dCCA), duodenal adenocarcinoma (DAC), and ampullary carcinoma. Based on histopathology, ampullary carcinoma is currently subdivided in intestinal (AmpIT), pancreatobiliary (AmpPB), and mixed subtypes. Despite close anatomical resemblance, it is unclear how ampullary subtypes relate to the remaining periampullary cancers in tumor characteristics and behavior. Methods: This international cohort study included patients after curative intent resection for periampullary cancer retrieved from 44 centers (from Europe, United States, Asia, Australia, and Canada) between 2010 and 2021. Preoperative CA19-9, pathology outcomes and 8-year overall survival were compared between DAC, AmpIT, AmpPB, dCCA, and PDAC. Results: Overall, 3809 patients were analyzed, including 348 DAC, 774 AmpIT, 848 AmpPB, 1,036 dCCA, and 803 PDAC. The highest 8-year overall survival was found in patients with AmpIT and DAC (49.8% and 47.9%), followed by AmpPB (34.9%, P < 0.001), dCCA (26.4%, P = 0.020), and finally PDAC (12.9%, P < 0.001). A better survival was correlated with lower CA19-9 levels but not with tumor size, as DAC lesions showed the largest size. Conclusions: Despite close anatomic relations of the five periampullary cancers, this study revealed differences in preoperative blood markers, pathology, and long-term survival. More tumor characteristics are shared between DAC and AmpIT and between AmpPB and dCCA than between the two ampullary subtypes. Instead of using collective definitions for "periampullary cancers" or anatomical classification, this study emphasizes the importance of individual evaluation of each histopathological subtype with the ampullary subtypes as individual entities in future studies.
|
|
| 8. |
- Uijterwijk, Bas A., et al.
(författare)
-
The road to tailored adjuvant chemotherapy for all four non-pancreatic periampullary cancers: An international multimethod cohort study
- 2024
-
Ingår i: British Journal of Cancer. - : SPRINGERNATURE. - 0007-0920 .- 1532-1827.
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Despite differences in tumour behaviour and characteristics between duodenal adenocarcinoma (DAC), the intestinal (AmpIT) and pancreatobiliary (AmpPB) subtype of ampullary adenocarcinoma and distal cholangiocarcinoma (dCCA), the effect of adjuvant chemotherapy (ACT) on these cancers, as well as the optimal ACT regimen, has not been comprehensively assessed. This study aims to assess the influence of tailored ACT on DAC, dCCA, AmpIT, and AmpPB. Patients and methods: Patients after pancreatoduodenectomy for non-pancreatic periampullary adenocarcinoma were identified and collected from 36 tertiary centres between 2010 - 2021. Per non-pancreatic periampullary tumour type, the effect of adjuvant chemotherapy and the main relevant regimens of adjuvant chemotherapy were compared. The primary outcome was overall survival (OS). Results: The study included a total of 2866 patients with DAC (n = 330), AmpIT (n = 765), AmpPB (n = 819), and dCCA (n = 952). Among them, 1329 received ACT, and 1537 did not. ACT was associated with significant improvement in OS for AmpPB (P = 0.004) and dCCA (P < 0.001). Moreover, for patients with dCCA, capecitabine mono ACT provided the greatest OS benefit compared to gemcitabine (P = 0.004) and gemcitabine - cisplatin (P = 0.001). For patients with AmpPB, no superior ACT regime was found (P > 0.226). ACT was not associated with improved OS for DAC and AmpIT (P = 0.113 and P = 0.445, respectively). Discussion: Patients with resected AmpPB and dCCA appear to benefit from ACT. While the optimal ACT for AmpPB remains undetermined, it appears that dCCA shows the most favourable response to capecitabine monotherapy. Tailored adjuvant treatments are essential for enhancing prognosis across all four non-pancreatic periampullary adenocarcinomas.
|
|
| 9. |
- Ballantyne, Kaye N., et al.
(författare)
-
Toward Male Individualization with Rapidly Mutating Y-Chromosomal Short Tandem Repeats
- 2014
-
Ingår i: Human Mutation. - : John Wiley & Sons. - 1059-7794 .- 1098-1004. ; 35:8, s. 1021-1032
-
Tidskriftsartikel (refereegranskat)abstract
- Relevant for various areas of human genetics, Y-chromosomal short tandem repeats (Y-STRs) are commonly used for testing close paternal relationships among individuals and populations, and for male lineage identification. However, even the widely used 17-loci Yfiler set cannot resolve individuals and populations completely. Here, 52 centers generated quality-controlled data of 13 rapidly mutating (RM) Y-STRs in 14,644 related and unrelated males from 111 worldwide populations. Strikingly, greater than99% of the 12,272 unrelated males were completely individualized. Haplotype diversity was extremely high (global: 0.9999985, regional: 0.99836-0.9999988). Haplotype sharing between populations was almost absent except for six (0.05%) of the 12,156 haplotypes. Haplotype sharing within populations was generally rare (0.8% nonunique haplotypes), significantly lower in urban (0.9%) than rural (2.1%) and highest in endogamous groups (14.3%). Analysis of molecular variance revealed 99.98% of variation within populations, 0.018% among populations within groups, and 0.002% among groups. Of the 2,372 newly and 156 previously typed male relative pairs, 29% were differentiated including 27% of the 2,378 father-son pairs. Relative to Yfiler, haplotype diversity was increased in 86% of the populations tested and overall male relative differentiation was raised by 23.5%. Our study demonstrates the value of RMY-STRs in identifying and separating unrelated and related males and provides a reference database.
|
|
| 10. |
- Brunner-La Rocca, Hans-Peter, et al.
(författare)
-
Which heart failure patients profit from natriuretic peptide guided therapy? A meta-analysis from individual patient data of randomized trials.
- 2015
-
Ingår i: European Journal of Heart Failure. - : Wiley. - 1388-9842 .- 1879-0844. ; 17:12, s. 1252-1261
-
Tidskriftsartikel (refereegranskat)abstract
- AIMS: Previous analyses suggest that heart failure (HF) therapy guided by (N-terminal pro-)brain natriuretic peptide (NT-proBNP) might be dependent on left ventricular ejection fraction, age and co-morbidities, but the reasons remain unclear.METHODS AND RESULTS: To determine interactions between (NT-pro)BNP-guided therapy and HF with reduced [ejection fraction (EF) ≤45%; HF with reduced EF (HFrEF), n = 1731] vs. preserved EF [EF > 45%; HF with preserved EF (HFpEF), n = 301] and co-morbidities (hypertension, renal failure, chronic obstructive pulmonary disease, diabetes, cerebrovascular insult, peripheral vascular disease) on outcome, individual patient data (n = 2137) from eight NT-proBNP guidance trials were analysed using Cox-regression with multiplicative interaction terms. Endpoints were mortality and admission because of HF. Whereas in HFrEF patients (NT-pro)BNP-guided compared with symptom-guided therapy resulted in lower mortality [hazard ratio (HR) = 0.78, 95% confidence interval (CI) 0.62-0.97, P = 0.03] and fewer HF admissions (HR = 0.80, 95% CI 0.67-0.97, P = 0.02), no such effect was seen in HFpEF (mortality: HR = 1.22, 95% CI 0.76-1.96, P = 0.41; HF admissions HR = 1.01, 95% CI 0.67-1.53, P = 0.97; interactions P < 0.02). Age (74 ± 11 years) interacted with treatment strategy allocation independently of EF regarding mortality (P = 0.02), but not HF admission (P = 0.54). The interaction of age and mortality was explained by the interaction of treatment strategy allocation with co-morbidities. In HFpEF, renal failure provided strongest interaction (P < 0.01; increased risk of (NT-pro)BNP-guided therapy if renal failure present), whereas in HFrEF patients, the presence of at least two of the following co-morbidities provided strongest interaction (P < 0.01; (NT-pro)BNP-guided therapy beneficial only if none or one of chronic obstructive pulmonary disease, diabetes, cardiovascular insult, or peripheral vascular disease present). (NT-pro)BNP-guided therapy was harmful in HFpEF patients without hypertension (P = 0.02).CONCLUSION: The benefits of therapy guided by (NT-pro)BNP were present in HFrEF only. Co-morbidities seem to influence the response to (NT-pro)BNP-guided therapy and may explain the lower efficacy of this approach in elderly patients.
|
|
