| 1. |
|
|
| 2. |
|
|
| 3. |
- Bylander, Jonas, 1978, et al.
(författare)
-
Pulse imaging and nonadiabatic control of solid-state artificial atoms
- 2009
-
Ingår i: Physical Review B - Condensed Matter and Materials Physics. - 2469-9950 .- 2469-9969. ; 80:22, s. 220506-
-
Tidskriftsartikel (refereegranskat)abstract
- Transitions in an artificial atom, driven nonadiabatically through an energy-level avoided crossing, can be controlled by carefully engineering the driving protocol. We have driven a superconducting persistent-current qubit with a large-amplitude radio-frequency field. By applying a biharmonic wave form generated by a digital source, we demonstrate a mapping between the amplitude and phase of the harmonics produced at the source and those received by the device. This allows us to image the actual wave form at the device. This information is used to engineer a desired time dependence, as confirmed by the detailed comparison with a simulation. © 2009 The American Physical Society.
|
|
| 4. |
- Berggren, Anna M., et al.
(författare)
-
Short‐chain fatty acid content and pH in caecum of rats fed various sources of starch
- 1995
-
Ingår i: Journal of the Science of Food and Agriculture. - : Wiley. - 0022-5142 .- 1097-0010. ; 68:2, s. 241-248
-
Tidskriftsartikel (refereegranskat)abstract
- Caecal pH and contents of short‐chain fatty acids (SCFA) were registered in rats fed three potential sources of resistant starch (RS); raw pea starch, raw potato starch, and an RS‐enriched preparation obtained from wheat starch by autoclaving and enzymatic incubation. Small intestinal digestibility and delivery of RS to the hind‐gut in the case of raw starches were determined by analysis of faecal starch in animals treated with antibiotics to prevent hind‐gut fermentation. RS content in the RS‐enriched preparation was determined as total starch remaining in an enzymatic gravimetric dietary fibre residue. The fermentability of RS was estimated from the faecal recovery of starch in normal animals with intact hind‐gut microflora. Approximately 35 g per 100 g and 32 g per 100 g were RS in the case of raw potato starch and the RS‐enriched preparation, respectively, versus only 1 g per 100 g in the case of raw pea starch. The caecal pH decreased with all test diets, being most significant with raw potato starch. SCFA production and faecal bulking were negligible with raw pea starch, whereas both raw potato starch and the RS‐enriched preparation significantly increased these parameters. The fermentability of RS in raw potato starch and the RS‐enriched preparation was similar, or about 60–70%. If calculated on basis of fermented amount, RS in raw potato starch was more potent in generating SCFA (49 μmol g−1) than in the RS‐enriched preparation (19 μmol g−1). RS in raw potato starch also displayed the highest faecal bulking capacity. In fact, the faecal dry weight increased more than expected merely from delivery of RS. The relative proportion in caecal contents of acetic‐, propionic‐ and butyric acid was 70, 17 and 8%, respectively, with no significant differences between the three sources of RS.
|
|
| 5. |
|
|
| 6. |
- Duwig, Christophe
(creator_code:cre_t)
-
Exhibition : Towards the energy of the future – the invisible revolution behind the electrical socket
- 2023
-
Konstnärligt arbeteabstract
- Energy Crisis! Electricity Price drama! The threat of global energy poverty! Media are generous with spectacular titles. Yes, energy is important, and yes, nearly all societal challenges are connected to how we convert, distribute and use energy. Therefore, the KTH Energy Platform and KTH Library presented an exhibition with the theme Towards the energy of the future – the invisible revolution behind the electrical socket.The exhibition displayed showcase illustrations from the book made by Lotta Waesterberg Tomasson, as well as books related to energy and electricity from the KTH Library's collections. In parallell with the exhibition, a series of live popular science lunch seminars with presentations of selected chapters of the book took place. As part of the exhibition, students from KTH's Electrical Engineering program also showcased exciting projects that connect to the anthology’s contents, made with materials and equipment from the student-driven ELAB and “Studentverkstan”. Visitors were also invited to share their reflections and ideas on energy.
|
|
| 7. |
- Ullah Khan, Zia, et al.
(författare)
-
Thermoelectric Polymers and their Elastic Aerogels
- 2016
-
Ingår i: Advanced Materials. - : John Wiley & Sons. - 0935-9648 .- 1521-4095.
-
Tidskriftsartikel (refereegranskat)abstract
- Electronically conducting polymers constitute an emerging class of materials for novel electronics, such as printed electronics and flexible electronics. Their properties have been further diversified to introduce elasticity, which has opened new possibility for "stretchable" electronics. Recent discoveries demonstrate that conducting polymers have thermoelectric properties with a low thermal conductivity, as well as tunable Seebeck coefficients - which is achieved by modulating their electrical conductivity via simple redox reactions. Using these thermoelectric properties, all-organic flexible thermoelectric devices, such as temperature sensors, heat flux sensors, and thermoelectric generators, are being developed. In this article we discuss the combination of the two emerging fields: stretchable electronics and polymer thermoelectrics. The combination of elastic and thermoelectric properties seems to be unique for conducting polymers, and difficult to achieve with inorganic thermoelectric materials. We introduce the basic concepts, and state of the art knowledge, about the thermoelectric properties of conducting polymers, and illustrate the use of elastic thermoelectric conducting polymer aerogels that could be employed as temperature and pressure sensors in an electronic-skin.
|
|
| 8. |
|
|
| 9. |
- Sani, Negar
(författare)
-
Addressability and GHz Operation in Flexible Electronics
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The discovery of conductive polymers in 1977 opened up a whole new path for flexible electronics. Conducting polymers and organic semiconductors are carbon rich compounds that are able to conduct charges while flexed and are compatible with low-cost and large-scale processes including printing and coating techniques. The conducting polymer has aided the rapidly expanding field of flexible electronics, leading to many new applications such as electronic skin, RFID tags, smart labels, flexible displays, implantable medical devices, and flexible sensors.However, there are several remaining challenges in the production and implementation of flexible electronic materials and devices. The conductivity of organic conductors and semiconductors is still orders of magnitude lower compared to their inorganic counterparts. In addition, non-flexible inorganic semiconductors still remain the materials of choice for high frequency applications; since the charge carrier mobility and thus operational speed of the organic materials are limited. Therefore, there remains a high demand to combine the high frequency operation of inorganic semiconductors with the flexible fabrication methods of organic systems for future electronics.In addition to the challenges in the choice of materials in flexible electronics, the upscaling of the flexible devices and implementing them in circuits can also be complicated. Lack of non-linearity is an issue that arises when flexible devices with linear behavior need to be incorporated in an array or matrix form. Non-linearity is important for applications such as displays and memory arrays, where the devices are arranged as matrix cells addressed by their row and column number. If the behavior of cells in the matrix is linear, addressing each cell affects the adjacent cells. Therefore, inducing non-linearity and, consequently, addressability in such linear devices is the first step before scaling up into matrix schemes.In this work, non-linear organic/inorganic hybrid devices are produced to overcome the limitations mentioned above and leverage the advantages of both organic and inorganic materials. Two novel methods are developed to incorporate non-flexible inorganic semiconductors into ultra-high frequency (UHF) flexible devices. In the first method, Si is ground into a powder with micrometer-sized particles and printed through standard screen printing. For the first time, allprinted flexible diodes operating in the GHz range are produced. The energy harvesting application of the printed diodes is demonstrated in a flexible circuit coupling an antenna and the display to the diode.A second and simpler room-temperature method based on lamination was later developed, which further improves device performance and operational frequency. For the first time, a flexible semiconducting composite film consisting of Si micro-particles, glycerol, and nano-fibrillated cellulose is produced and used as the semiconducting layer of the UHF diode.The diodes fabricated through both mentioned processes are demonstrated in energy harvesting applications in the GHz range; however, they can also serve as rectifiers or non-linear elements in any other flexible and UHF circuit.Furthermore, a new approach is developed to induce non-linearity and hence addressability in linear devices in order to make their implementation in flexible matrix form feasible. This is accomplished by depositing a ferroelectric layer on a device electrode and thus controlling charge transfer through the electrode. The electrode current becomes limited to the charge displacement current established in the ferroelectric layer during polarization. Thus, the current does not follow the voltage linearly and non-linearity is induced in the device. The polarization voltage is dictated by the thickness of the ferroelectric layer. Therefore, the switching voltage of the device can be tuned by adjusting the ferroelectric layer thickness. In this work, the organic ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) is used due to its distinctive properties such as stability, high polarizability and simple processability. The polarization of P(VDF-TrFE) through an electrolyte and an electrophoretic liquid is investigated. In addition, a simple model is presented in order to understand the field and potential distribution, and the ferroelectric polarization, in the P(VDF-TrFE)-electrolyte contact. The induction of non-linearity through P(VDF-TrFE) is successfully demonstrated in novel addressable and bistable devices and memory elements such as non-linear electrophoretic display cells, organic ferroelectrochromic displays (FeOECDs), and ferroelectrochemical organic transistors (FeOECTs).
|
|
| 10. |
|
|
