| 1. |
- Fuchs, A., et al.
(författare)
-
Minimum Information about T Regulatory Cells: A Step toward Reproducibility and Standardization
- 2018
-
Ingår i: Frontiers in Immunology. - : Frontiers Media SA. - 1664-3224. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Cellular therapies with CD4+ T regulatory cells (Tregs) hold promise of efficacious treatment for the variety of autoimmune and allergic diseases as well as posttransplant complications. Nevertheless, current manufacturing of Tregs as a cellular medicinal product varies between different laboratories, which in turn hampers precise comparisons of the results between the studies performed. While the number of clinical trials testing Tregs is already substantial, it seems to be crucial to provide some standardized characteristics of Treg products in order to minimize the problem. We have previously developed reporting guidelines called minimum information about tolerogenic antigen-presenting cells, which allows the comparison between different preparations of tolerance-inducing antigen-presenting cells. Having this experience, here we describe another minimum information about Tregs (MITREG). It is important to note that MITREG does not dictate how investigators should generate or characterize Tregs, but it does require investigators to report their Treg data in a consistent and transparent manner. We hope this will, therefore, be a useful tool facilitating standardized reporting on the manufacturing of Tregs, either for research purposes or for clinical application. This way MITREG might also be an important step toward more standardized and reproducible testing of the Tregs preparations in clinical applications.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Nilforooshan, Mohammad A., et al.
(författare)
-
Application of a multiple-trait, multiple-country genetic evaluation model for female fertility traits
- 2010
-
Ingår i: Journal of Dairy Science. - : American Dairy Science Association. - 0022-0302 .- 1525-3198. ; 93, s. 5977-5986
-
Tidskriftsartikel (refereegranskat)abstract
- The need to implement a method that can handle multiple traits per country in international genetic evaluations is evident. Today, many countries have implemented multiple-trait national genetic evaluations and they may expect to have their traits simultaneously analyzed in international genetic evaluations. Traits from the same country are residually correlated and the method currently in use, single-trait multiple across-country evaluation (ST-MACE), cannot handle nonzero residual correlations. Therefore, multiple-trait, multiple across-country evaluation (MT-MACE) was proposed to handle several traits from the same country simultaneously. To test the robustness of MT-MACE on real data, female fertility was chosen as a complex trait with low heritability. Data from 7 Holstein populations, 3 with 2 traits and 4 with 1 trait, were used. The differences in the estimated genetic correlations by MT-MACE and the single ST-MACE analysis (average absolute deviation of 0.064) were due to the bias of considering several traits from the same country in the ST-MACE analysis. However, the differences between the estimated genetic correlations by MT-MACE and multiple ST-MACE analyses avoiding more than one trait per country in each analysis (average absolute deviation of 0.066) were due to the lack of analysis of the correlated traits from the same country together and using the reported within-country genetic correlations. Applying MT-MACE resulted in reliability gain in international genetic evaluations, which was different from trait to trait and from bull to bull. The average reliability gain by MT-MACE over ST-MACE was 3.0 points for domestic bulls and 6.3 points for foreign bulls. Even countries with 1 trait benefited from the joint analysis of traits from the 2-trait countries. Another superiority of MT-MACE over ST-MACE is that the bulls that do not have national genetic evaluation for some traits from multiple trait countries will receive international genetic evaluations for those traits. Rank correlations were high between ST-MACE and MT-MACE when considering all bulls. However, the situation was different for the top 100 bulls. Simultaneous analysis of traits from the same country affected bull ranks, especially for top 100 bulls. Multi-trait MACE is a recommendable and robust method for international genetic evaluations and is appropriate for handling multiple traits per country, which can increase the reliability of international genetic evaluations.
|
|
| 5. |
|
|
| 6. |
- Nilforooshan, Mohammad A., et al.
(författare)
-
MT-MACE for female fertility and milk yield
- 2009
-
Ingår i: Bulletin / International Bull Evaluation Service. - 1011-6079. ; 40, s. 68-71
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
- Bjurhager, Ingela, et al.
(författare)
-
Mechanical characterization of juvenile European aspen (Populus tremula) and hybrid aspen (Populus tremula × Populus tremuloides) using full-field strain measurements
- 2008
-
Ingår i: Journal of Wood Science. - : Springer Science and Business Media LLC. - 1435-0211 .- 1611-4663. ; 54:5, s. 349-355
-
Tidskriftsartikel (refereegranskat)abstract
- Functional analysis of genes and proteins involved in wood formation and fiber properties often involves phenotyping saplings of transgenic trees. The objective of the present study was to develop a tensile test method for small green samples from saplings, and to compare mechanical properties of juvenile European aspen (Populus tremula) and hybrid aspen (Populus tremula × tremuloides). Small microtomed sections were manufactured and successfully tested in tension parallel to fiber orientation. Strain was determined by digital speckle photography. Results showed significantly lower values for juvenile hybrid aspen in both Young's modulus and tensile strength parallel to the grain. Average Young's moduli spanned the ranges of 5.9-6.6 and 4.8-6.0 GPa for European aspen and hybrid aspen, respectively. Tensile strength was in the range of 45-49 MPa for European aspen and 32-45 MPa for hybrid aspen. The average density (oven-dry) was 284 kg/m3 for European aspen and 221 kg/m3 for hybrid aspen. Differences in mechanical properties correlated with differences in density.
|
|
| 8. |
- Bjurhager, Ingela, et al.
(författare)
-
State of degradation in archeological oak from the 17th century vasa ship : Substantial strength loss correlates with reduction in (holo)cellulose molecular weight
- 2012
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; :8, s. 2521-2527
-
Tidskriftsartikel (refereegranskat)abstract
- In 1628, the Swedish warship Vasa capsized on her maiden voyage and sank in the Stockholm harbor. The ship was recovered in 1961 and, after polyethylene glycol (PEG) impregnation, it was displayed in the Vasa museum. Chemical investigations of the Vasa were undertaken in 2000, and extensive holocellulose degradation was reported at numerous locations in the hull. We have now studied the longitudinal tensile strength of Vasa oak as a function of distance from the surface. The PEG-content, wood density, and cellulose microfibril angle were determined. The molar mass distribution of holocellulose was determined as well as the acid and iron content. A good correlation was found between the tensile strength of the Vasa oak and the average molecular weight of the holocellulose, where the load-bearing cellulose microfibril is the critical constituent. The mean tensile strength is reduced by approximately 40%, and the most affected areas show a reduction of up to 80%. A methodology is developed where variations in density, cellulose microfibril angle, and PEG content are taken into account, so that cell wall effects can be evaluated in wood samples with different rate of impregnation and morphologies.
|
|
| 9. |
- Bjurhager, Ingela, et al.
(författare)
-
Towards improved understanding of PEG-impregnated waterlogged archaeological wood : A model study on recent oak
- 2010
-
Ingår i: Holzforschung. - 0018-3830 .- 1437-434X. ; 64:2, s. 243-250
-
Tidskriftsartikel (refereegranskat)abstract
- To prevent deformation and cracking of waterlogged archaeological wood, polyethylene glycol (PEG) as a bulk impregnation agent is commonly applied. PEG maintains the wood in a swollen state during drying. However, swelling of wood can reduce its mechanical properties. In this study, the cellular structure of oak and cell wall swelling was characterized by scanning electron microscopy (SEM) of transverse cross-sections, and the microfibril angle of oak fibers was determined by wide angle X-ray scattering (WAXS). Samples of recent European oak (Quercus robur L) impregnated with PEG (molecular weight of 600) were tested in axial tension and radial compression. Mechanical tests showed that axial tensile modulus and strength were only slightly affected by PEG, whereas radial compressive modulus and yield strength were reduced by up to 50%. This behavior can be explained by the microstructure and deformation mechanisms of the material. Microfibril angles in tensile test samples were close to zero. This implies tensile loading of cellulose microfibrils within the fiber cell walls without almost any shear in the adjacent amorphous matrix. These results are important because they can help separate the impact of PEG on mechanical properties from that of chemical degradation in archaeological artifacts, which display only small to moderate biological degradation.
|
|
| 10. |
- Bjurhager, Ingela, et al.
(författare)
-
Ultrastructure and Mechanical Properties of Populus Wood with Reduced Lignin Content Caused by Transgenic Down-Regulation of Cinnamate 4-Hydroxylase
- 2010
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 11:9, s. 2359-2365
-
Tidskriftsartikel (refereegranskat)abstract
- Several key enzymes in lignin biosynthesis of Populus have been down-regulated by transgenie approaches to investigate their role in wood lignification and to explore their potential for lignin modification. Cinnamate 4-hydroxylase is an enzyme in the early phenylpropanoid pathway that has not yet been functionally analyzed in Populus. This study shows that down-regulation of cinnamate 4-hydroxylase reduced Klason lignin content by 30% with no significant change in syringyl to guaiacyl ratio. The lignin reduction resulted in ultrastructural differences of the wood and a 10% decrease in wood density. Mechanical properties investigated by tensile tests and dynamic mechanical analysis showed a decrease in stiffness, which could be explained by the lower density. The study demonstrates that a large modification in lignin content only has minor influences on tensile properties of wood in its axial direction and highlights the usefulness of wood modified beyond its natural variation by transgene technology in exploring the impact of wood biopolymer composition and ultrastructure on its material properties.
|
|
