SwePub
Tyck till om SwePub Sök här!
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Borgström Anders) srt2:(2000-2004);hsvcat:2"

Sökning: WFRF:(Borgström Anders) > (2000-2004) > Teknik

  • Resultat 1-3 av 3
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Wernersson, Lars-Erik, et al. (författare)
  • Metalorganic vapor phase epitaxy-grown GaP/GaAs/GaP and GaAsP/GaAs/GaAsP n-type resonant tunnelling diodes
  • 2002
  • Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 80:10, s. 1841-1843
  • Tidskriftsartikel (refereegranskat)abstract
    • We have studied GaP/GaAs/GaP and GaAsxP1-x/GaAs/GaAsxP1-x double-barrier resonant tunnelling diodes grown by metalorganic vapor phase epitaxy. We find that GaP tensile strained barriers in GaP/GaAs/GaP diodes may be grown with a barrier thickness below the critical thickness of about 12 monolayers. However, a corrugation of the strained barrier is observed by transmission electron microscopy. This variation may explain the low peak-to-valley ratio of the diodes (about 2). In contrast, GaAsxP1-x/GaAs/GaAsxP1-x resonant tunnelling diodes have been grown with a homogeneous thickness of the barriers, consequently showing a substantially improved electrical performance compared to the GaP diodes with peak-to-valley ratios >5.
  •  
2.
  • Wernersson, Lars-Erik, et al. (författare)
  • Thin layers of GaInP, GaP and GaAsP in metalorganic vapour phase epitaxy-grown resonant tunnelling diodes
  • 2002
  • Ingår i: Applied Surface Science. - 1873-5584. ; 190:1, s. 252-257
  • Tidskriftsartikel (refereegranskat)abstract
    • We have studied the epitaxial growth and electrical performance of Al-free, GaAs-based, resonant tunnelling diodes (RTDs) including thin barriers of GaInP, GO, or GaAsxP1-x. n-Type tunnelling diodes have been fabricated and the symmetry in the current-voltage (I-V) characteristics, as well as the peak-to-valley ratios, are found to be sensitive probes for the inter-face quality in the heterostructures. For GaInP RTDs, we show that the introduction of Gap intermediate layers is crucial for the realisation. of a useful tunnelling current. RTDs including thin barriers (less than about 10 monolayers (ML)) of Gap are realised, but the strong mismatch between the materials limit the useful thickness. Finally, RTDs with GaAslambdaP1-x alloys are fabricated showing the best peak-to-valley ratio of the diodes (about 5), as well as a symmetric I-V characteristics. The electrical data are further compared to studies by transmission electron microscopy (TEM) in the various material systems.
  •  
3.
  • Ouattara, Lassana, et al. (författare)
  • Stacked InAs quantum dots in InP studied by cross-sectional scanning tunnelling microscopy
  • 2004
  • Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 15:12, s. 1701-1707
  • Tidskriftsartikel (refereegranskat)abstract
    • We report on cross-sectional scanning tunnelling microscopy (XSTM) measurements on vertically stacked InAs quantum dots in InP barriers. We have investigated two-, five- and tenfold stacked quantum dot structures,grown by low-pressure metal-organic vapour phase epitaxy. The XSTM images reveal that the quantum dots are generally vertically well aligned, and have a truncated pyramidal shape in agreement with similar studies of InAs dots in GaAs. STM images displaying atomic resolution indicate that the dots have a pure InAs stoichiometry, with intermixing only occurring in the top and bottom dot rows. Further, we have investigated various anomalies (considered as defects) as observed in the quantum dot stacks. The origins of these anomalies are discussed and compared to theoretical predictions available so far.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-3 av 3

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy