| 1. |
- Larsson, Matilda, et al.
(författare)
-
Carotid strain estimation using an ultrasound-based speckle tracking algorithm
- 2012
-
Ingår i: 2012 IEEE International Ultrasonics Symposium (IUS). - : IEEE. - 9781467345613 ; , s. 1394-1397
-
Konferensbidrag (refereegranskat)abstract
- Carotid strain imaging using ultrasound-based speckle tracking has showed potential in risk stratification of cardiovascular diseases. However, assessing strain in the artery wall and in atherosclerotic plaques is challenging because of small dimensions and low deformations in relation to the applied ultrasound wavelength. High-resolution ultrasound has potential to improve the speckle tracking performance by increasing spatial resolution. The aim of this study was to compare carotid strain estimation by speckle tracking using standard clinical ultrasound and high-resolution ultrasound in an experimental setup. Ultrasound long-axis images were obtained using a standard clinical ultrasound system (Vivid7) and a high-resolution ultrasound system (Vevo2100) in dynamic phantoms mimicking the carotid artery. Speckle tracking was performed to estimate radial and longitudinal strain whereas sonomicrometry was used as reference. The results showed a significant better performance for speckle tracking applied on images from the high-resolution system compared to the standard clinical system.
|
|
| 2. |
- Larsson, Matilda, et al.
(författare)
-
In-vivo assessment of radial and longitudinal strain in the carotid artery using speckle tracking
- 2010
-
Ingår i: 2010 IEEE International Ultrasonics Symposium Proceedings. - : IEEE. - 9781457703829 ; , s. 1328-1331
-
Konferensbidrag (refereegranskat)abstract
- Ultrasound-based algorithms are commonly used to assess mechanical properties of arterial walls in studies of arterial stiffness and atherosclerosis. Speckle tracking based techniques used for estimation of myocardial strain can be applied on vessels to estimate strain of the arterial wall. Previous elastography studies in vessels have mainly focused on radial strain measurements, whereas the longitudinal strain has been more or less ignored. However, recently we showed the feasibility of speckle tracking to assess longitudinal strain of the carotid artery in-silico. The aim of this study was to test this methodology in-vivo. Ultrasound images were obtained in seven healthy subjects with no known cardiovascular disease (39 ± 14 years old) and in seven patients with coronary artery disease (CAD), (69 ± 4 years old). Speckle tracking was performed on the envelope detected data using our previous developed algorithm. Radial and longitudinal strains were estimated throughout two cardiac cycles in a region of interest (ROI) positioned in the posterior vessel wall. The mean peak systolic radial and longitudinal strain values from the two heart cycles were compared between the groups using a student's t-test. The mean peak radial strain was -39.1 ± 15.1% for the healthy group and -20.4 ± 7.5% for the diseased group (p = 0.01), whereas the mean peak longitudinal strain was 4.8 ± 1.1% and 3.2 ± 1.6% (p = 0.05) for the healthy and diseased group, respectively. Both peak radial and longitudinal strain values were thus significantly reduced in the CAD patient group. This study shows the feasibility to estimate radial and longitudinal strain in-vivo using speckle tracking and indicates that the method can detect differences between groups of healthy and diseased (CAD) subjects.
|
|
| 3. |
- Larsson, Matilda, 1981-, et al.
(författare)
-
Ultrasound-based 2D Strain Estimation of the Carotid Artery : an in-silico feasibility study
- 2009
-
Ingår i: Ultrasonics Symposium (IUS), 2009 IEEE International. - : IEEE. - 9781424443895 ; , s. 5441992-
-
Konferensbidrag (refereegranskat)abstract
- Ultrasound based estimation of arterial wall properties is commonly used to assess vessel wall stiffness in studies of vascular diseases. Recently, it was shown that the longitudinal motion of the vessel during systole can be measured using speckle tracking. However, the assessment of longitudinal strain in the vessel wall has to be further investigated. The aim of this study was to test the feasibility of simultaneous assessment of radial and longitudinal strain in the carotid artery using computer simulations. A kinematic cylindrical model of the carotid artery with realistic dimensions was constructed. The model was deformed radially according to temporal distention measured in-vivo while longitudinal deformation was the result of conservation of volume. Moreover, longitudinal motion was superimposed based on profiles obtained in-vivo. Ultrasound long axis images were simulated using a generalized convolution model (COLE) with realistic image properties. Four models with different scatterer distributions were built. For each of them, longitudinal and radial motion were estimated using normalized cross-correlation with spline interpolation to detect sub-sample motion. Radial and longitudinal strains, obtained by linear regression were compared with the ground truth from the model. The maximal systolic radial strain was estimated to be -12.77 ± 0.4% (ground truth -13.89%) while longitudinal strain was 5.21 ± 0.67% (ground truth 5.3%). This study shows the feasibility of simultaneously measuring radial and longitudinal strain in the carotid artery by making use of currently available hardware.
|
|
| 4. |
- Larsson, Matilda, et al.
(författare)
-
Ultrasound-based speckle tracking for 3D Strain estimation of the Arterial wall - An experimental validation study in a tissue mimicking phantom
- 2011
-
Konferensbidrag (refereegranskat)abstract
- Arterial stiffness is an important risk factor for cardiovascular disease. As such, ultrasound-based methods have been proposed to assess arterial strain as a measure of stiffness. The aim of the current study was to validate our recently proposed speckle tracking (ST) algorithm to estimate the in-plane wall strain tensor in an experimental setup. Three polyvinyl alcohol phantoms mimicking the carotid artery were constructed with different mechanical properties (2, 3 and 4 freeze-thaw cycles). The phantoms were connected to a pump, programmed to generate carotid flow profiles at peak flows of 7, 14, 21, 28 and 35 ml/s. Long and short-axis ultrasound images were obtained using a Vivid7 Dimension system. Radial, longitudinal and circumferential strains were estimated using the ST algorithm (kernel size: 2.7λx2λ, normalized cross-correlation; spline inter-polation for subsample motion estimation; 40% window overlap). Sonomicrometry was used to acquire reference values of strain in the phantoms. Good agreement was found between the estimated radial, longitudinal and circumferential strain and the acquired reference strain. The correlation between estimated mean peak strain values and reference peak strain values was r = 0.92 (p < 0.001) for radial strain, r = 0.72 (p = 0.006) for longitudinal strain and r = 0.91 (p < 0.001) for circumferential strain.
|
|
