| 1. |
- Pecunia, Vincenzo, et al.
(författare)
-
Roadmap on energy harvesting materials
- 2023
-
Ingår i: Journal of Physics. - : IOP Publishing. - 2515-7639. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere.
|
|
| 2. |
- Zhang, Pimin, 1990-, et al.
(författare)
-
Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings
- 2019
-
Ingår i: Surface & Coatings Technology. - Elsevier : Elsevier BV. - 0257-8972 .- 1879-3347. ; 364, s. 43-56
-
Tidskriftsartikel (refereegranskat)abstract
- Oxide scale formed on HVAF-sprayed NiCoCrAlY coatings and the effect of surface treatment were investigated by a multi-approach study combining photo-stimulated luminescence, microstructural observation and mass gain. The initial oxidationbehaviour of as-sprayed, polished and shot-peened coatings at 1000 °C is studied. Both polished and shot-peened coatings exhibited superior performance due to rapid formation of α-Al2O3 fully covering the coating and suppressing the growth of transient alumina, assisted by a high density of α-Al2O3 nuclei on surface treatment induced defects. Moreover, the fast development of a two-layer alumina scale consisting of an inward-grown inner α-Al2O3 layer and an outer layer transformed from outward-grown transient alumina resulted in a higher oxide growth rate of the as-sprayed coating.
|
|
| 3. |
- Cai, Yumeng, et al.
(författare)
-
Characterization of Gate-Oxide Degradation Location for SiC MOSFETs Based on the Split C-V Method Under Bias Temperature Instability Conditions
- 2023
-
Ingår i: IEEE transactions on power electronics. - : Institute of Electrical and Electronics Engineers (IEEE). - 0885-8993 .- 1941-0107. ; 38:5, s. 6081-6093
-
Tidskriftsartikel (refereegranskat)abstract
- Gate-oxide degradation has been one of the major reliability challenges of SiC mosfets. Comprehensive and accurate localization of gate-oxide degradation under bias temperature instability (BTI) conditions is important to improve the device reliability. The split C-V [gate-source capacitance C-GS (v(G)) and gate-drain capacitance C-GD (v(G))] method is proposed in this article to locate gate-oxide degradation. Moreover, a BTI automated characterization system integrated I-V and split C-V test is presented. The effect of gate-oxide degradation on threshold voltage and split C-V under dc and ac BTI conditions is investigated and the degradation location is analyzed. Furthermore, the degradation simulation is conducted with technology computer aided design (TCAD) to reveal the mechanism. The results show that the different parts of split C-V can characterize degradation location, the type, and energy level of traps. The acceptor traps near valence band and donor traps near conduction band cause gate-oxide degradation above the channel and junction field effect transistor (JFET) region in positive bias temperature instability (PBTI) and Negative Bias Temperature Instability (NBTI), respectively. In ac BTI, the gate-oxide degradation at the channel region is independent of v(G) polarity, while the opposite is true above JFET region. These findings help to improve the long-term operation reliability of gate oxide from the perspective of chip design and application.
|
|
| 4. |
- Andresen, Christian G., et al.
(författare)
-
Soil moisture and hydrology projections of the permafrost region-a model intercomparison
- 2020
-
Ingår i: Cryosphere. - : Copernicus GmbH. - 1994-0416. ; 14:2, s. 445-459
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates and compares soil moisture and hydrology projections of broadly used land models with permafrost processes and highlights the causes and impacts of permafrost zone soil moisture projections. Climate models project warmer temperatures and increases in precipitation (P) which will intensify evapotranspiration (ET) and runoff in land models. However, this study shows that most models project a long-term drying of the surface soil (0-20 cm) for the permafrost region despite increases in the net air-surface water flux (P-ET). Drying is generally explained by infiltration of moisture to deeper soil layers as the active layer deepens or permafrost thaws completely. Although most models agree on drying, the projections vary strongly in magnitude and spatial pattern. Land models tend to agree with decadal runoff trends but underestimate runoff volume when compared to gauge data across the major Arctic river basins, potentially indicating model structural limitations. Coordinated efforts to address the ongoing challenges presented in this study will help reduce uncertainty in our capability to predict the future Arctic hydrological state and associated land-atmosphere biogeochemical processes across spatial and temporal scales.
|
|
| 5. |
- Peng, Chen, et al.
(författare)
-
Industrial Internet of Things enabled supply-side energy modelling for refined energy management in aluminium extrusions manufacturing
- 2021
-
Ingår i: Journal of Cleaner Production. - : Elsevier Science Ltd. - 0959-6526 .- 1879-1786. ; 301
-
Tidskriftsartikel (refereegranskat)abstract
- To improve industrial sustainability performance in manufacturing, energy management and optimi-sation are key levers. This is particularly true for aluminium extrusions manufacturing dan energy -intensive production system with considerable environmental impacts. Many energy management and optimisation approaches have been studied to relieve such negative impact. However, the effectiveness of these approaches is compromised without the support of refined supply-side energy consumption information. Industrial internet of things provides opportunities to acquire refined energy consumption information in its data-rich environment but also poses a range of difficulties in implementation. The existing sensors cannot directly obtain the energy consumption at the granularity of a specific job. To acquire that refined energy consumption information, a supply-side energy modelling method based on existing industrial internet of things devices for energy-intensive production systems is proposed in this paper. First, the job-specified production event concept is proposed, and the layout of the data acqui-sition network is designed to obtain the event elements. Second, the mathematical models are developed to calculate the energy consumption of the production event in three process modes. Third, the energy consumption information of multiple manufacturing element dimensions can be derived from the mathematical models, and therefore, the energy consumption information on multiple dimensions is easily scaled. Finally, a case of refined energy cost accounting is studied to demonstrate the feasibility of the proposed models. ? 2021 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
|
|
| 6. |
- Tang, Shengwen, et al.
(författare)
-
Current and future hydropower development in Southeast Asia countries (Malaysia, Indonesia, Thailand and Myanmar)
- 2019
-
Ingår i: Energy Policy. - : Elsevier BV. - 0301-4215. ; 129, s. 239-249
-
Tidskriftsartikel (refereegranskat)abstract
- This work discusses the development of hydropower in four Southeast Asia countries. With rapid economic development and insufficient energy supply, hydropower, as an important clean energy, plays a bigger role than before. It is shown that hydropower has immense potential and is the best choice to cater for the energy demand in Southeast Asia. In this work, Malaysia, Indonesia, Thailand and Myanmar are selected to analyze their hydropower development. This work introduces the status of hydropower resources, the current situation of hydropower development and the main distribution of hydropower stations in the four countries. In addition, the paper also introduces some energy policies, the development advantages and obstacles of the four countries, and puts forward suggestions for the future hydropower development of these four countries.
|
|
| 7. |
- Wen, Guanzhao, et al.
(författare)
-
Energy level offsets determine the interplay between charge and energy transfer in all-small-molecule organic solar cells
- 2023
-
Ingår i: Chemical Engineering Journal. - 1385-8947. ; 475
-
Tidskriftsartikel (refereegranskat)abstract
- All-small-molecule organic solar cells (ASM OSCs) hold great promise in OSCs owing to their defined structures, simple purification, and good reproducibility, but are challenging for further improved efficiency. The energy level strategy has been broadly applied to obtain a better performance; however, a comprehensive understanding of the effects of energy level offset on photoexcitation dynamics in ASM OSCs is rarely studied. Herein, for Y-series molecules (Y6, Y10, Y5, and BTP-4F-12) based ASM OSCs, the effect of energy level offset on charge photogeneration was investigated using steady-state and time-resolved spectroscopies. We found that both energy and charge transfer could occur in blend films. A method to quantitatively analyze the contribution of charge and energy transfer processes was developed. For BTR-Cl:Y6 with the highest LUMO level offset, ∼ 23% of photogenerated excitons in donor dissociated via “energy transfer and the subsequent charge transfer” pathway, suggesting that the energy transfer in blend films should also be considered. And for the hole transfer, the excitons in Y-series molecules can only be effectively dissociated when the HOMO energy level offset is higher than 0.11 eV. Besides, a higher energy level offset would also suppress carrier recombination in ultrafast timescale. These results may shed light on the design of ASM OSCs.
|
|
| 8. |
- Chen, Zhe, et al.
(författare)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Tidskriftsartikel (refereegranskat)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 9. |
- Chen, Zhe
(författare)
-
Surface Integrity and Fatigue Performance of Nickel-based Superalloys
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Due to global warming, the demand for more efficient gas turbines has increased. A way to achieve this, is by increasing the operating temperature of the gas turbine. Therefore, nickel-based superalloys have been developed to withstand these extreme temperatures and loads, especially in the hot sections. Today, the way of operating land-based gas turbines is changing. Instead of running for long periods of time, the operation is becoming more flexible, with ever-increasing cyclic loads and number of start and stop cycles. To handle the increased stress and cycles, component resistance to fatigue failures need to be improved.Surface integrity is critical to fatigue performance, since fatigue cracks normally initiate at a surface. Machining changes the surface integrity which can result in worse fatigue resistance. The work presented in this Ph.D. thesis was conducted in collaboration with Siemens Industrial Turbomachinery AB in Finspång, Sweden. Surface integrity changes which are induced during machining and their effects on fatigue performance have been studied on the alloy Inconel 718. Inconel 718 is a widely-used nickel-based superalloy for high temperature applications in modern gas turbines.Broaching, milling, and wire electrical discharge machining, related to component manufacturing in turbo machinery industries, were included in this study. Machining induced surface defects provide preferential sites for fatigue crack initiation which influence the fatigue performance of the alloy. If compressive residual stresses are induced during machining, they benefit the fatigue life by retarding fatigue crack initiation away from surface regions. Shot peening was performed on machined Inconel 718, by which high compressive residual stresses are deliberately induced. It results in enhanced fatigue performance.The high temperatures in gas turbines generally deteriorate the surface integrity. Recrystallization often occurs in the highly deformed surface layer. Microstructural degradation, in the form of α-Cr precipitates, have also been frequently observed in the deformed surface and sub-surface microstructure. Oxidation at elevated temperatures degrades the surface integrity and thereby also the fatigue performance. Fatigue cracks are preferably initiated at oxidized surface carbides, if thermal exposure has been made prior to the test. It is even worse when high temperatures relax the beneficial surface compression induced by shot-peening and thereby lowering the fatigue resistance.Machinability of a newly developed nickel-based superalloy, AD 730TM, and the surface integrity induced during turning have also been studied in this thesis project. AD 730TM is a candidate for turbine disc applications with an operating temperature above 650 °C. At such high temperatures, Inconel 718 is no longer stable and its mechanical properties start to degrade.To summarize, the results from this thesis work show the importance of understanding surface integrity effects for fatigue applications, especially in harsh environments. Moreover, the knowledge gained through this work could be used for surface enhancement of turbine components which are subjected to a high risk of fatigue failure. These will contribute to more efficient and flexible power generation by gas turbines.
|
|
| 10. |
- Chen, Zhe, et al.
(författare)
-
Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
- 2016
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer. - 1073-5623 .- 1543-1940. ; 47A:7, s. 3664-3676
-
Tidskriftsartikel (refereegranskat)abstract
- The current study focused on the surface integrity issues associated with broaching of Inconel 718 and the structural stability of the broached specimen at high temperatures, mainly involving the microstructural changes and residual stress relaxation. The broaching operation was performed using similar cutting conditions as that used in turbo machinery industries for machining fir-tree root fixings on turbine disks. Thermal exposure was conducted at 723 K, 823 K, and 923 K (450 A degrees C, 550 A degrees C, and 650 A degrees C) for 30, 300, and 3000 hours, respectively. Surface cavities and debris dragging, sub-surface cracks, high intensity of plastic deformation, as well as the generation of tensile residual stresses were identified to be the main issues in surface integrity for the broached Inconel 718. When a subsequent heating was applied, surface recrystallization and alpha-Cr precipitation occurred beneath the broached surface depending on the applied temperature and exposure time. The plastic deformation induced by the broaching is responsible for these microstructural changes. The surface tension was completely relaxed in a short time at the temperature where surface recrystallization occurred. The tensile layer on the sub-surface, however, exhibited a much higher resistance to the stress relief annealing. Oxidation is inevitable at high temperatures. The study found that the surface recrystallization could promote the local Cr diffusion on the broached surface.
|
|
